How to open a Toyota Corolla without a key: video instructions on how to get through the trunk

The standard sound system on the Camry has fairly high sound quality. But its functionality, unfortunately, leaves much to be desired. Moreover, modern multimedia centers on top-end operating systems are offered in a budget version for less than half the cost of a new full-time device. Therefore, the best option would be if the standard multimedia system fails on Toyota Camry remove radio and replace it with a more advanced model.

How to remove the radio on a Camry

Open the car without a key

Experts do not recommend performing an autopsy on a 2008 Toyota Corolla yourself or asking your neighbors in the parking lot to do it. Also, you shouldn’t ask people you don’t know about this.

There is a small chance that you will be able to open the car on your own. Alarm systems and locks are made in such a way as to prevent car break-ins. Based on this, attempts to open the car on your own will not only not be successful, but can also cause damage to your car. Also, unprofessional attempts to open the lock can greatly complicate the work of a qualified specialist who will open the car. The question of how to open a Toyota Corolla without a key remains unresolved.

Maintenance costs

In this case, it is impossible to say with one hundred percent certainty that one model is noticeably cheaper than another in terms of costs, since these cars are approximately located in the same price segment. However, if you pay attention to even a slight difference in the price of spare parts and consumables, it becomes obvious that the Japanese Mitsubishi L200 pickup truck will be a more interesting option for the upcoming purchase, although this difference is not the most significant. Here we should also not forget about the daily potential costs of motorists for purchasing fuel. It is precisely in this regard that the Japanese model, updated this year, looks more interesting, since this model is equipped with more economical and modern engines. Consequently, it will not be possible to trace any serious differences between vehicles.

Who can correctly and legally open a Toyota Corolla?

Seeking help from a company specializing in such work would be an excellent way out of this situation. The specialists of these organizations know how to quickly open the car. On your part, you will only need to wait for the specialist and pay for his work after completion.

By hiring the services of a knowledgeable technician, you avoid having to repair a broken lock, door or broken glass.

Firms providing such services provide highly paid training to their specialists. Private individuals usually do not receive any training at all and, as a result, cannot guarantee you a positive result, and most importantly, the integrity of the locks and the safety of the car after attempting to open it.

A professional has a safe set of tools that cannot be found in stores for public use. Companies, anticipating the situation with drivers losing keys, often provide their service centers with the tools necessary for opening them. In addition to the tools, such a scrupulous procedure requires experience. So training is an integral part of the work of a service professional. And excessive confidence in the success of opening the car yourself can lead to its breakdown.

The best way to prepare a Toyota Land Cruiser 100 for long trips

Any auto traveler will tell you that for off-road expeditions, the Toyota Land Cruiser is what you need. And among all the variety of “cruisers”, the long-out-of-production model 105 is especially popular. So Evgeny Smirnov, known in the off-road environment under the nickname Kimych, at first also looked closely at the “stop”.

Diver. The removed air intake allows you to storm deep fords without the risk of getting a water hammer

Zhenya didn’t really fantasize about the preparation, because everything had long been invented by thousands of TLC off-road tuning fans around the world. Therefore, ready-made solutions designed for specific tasks were selected.

What is needed to open a car by a professional?

When you call a specialist, describe the problem in detail, indicate the make of the car and its general characteristics. After a detailed description, it is likely that a professional will be able to help you over the phone, and the car will be able to open.

Often you have to wait for a specialist to arrive.

You will have to show him the documents for the car, if they are in the car, then show them immediately after opening it. Otherwise, the car will be locked and you will end up at the police station.

Ride quality, maneuverability and handling.

If a car enthusiast chooses a passenger truck for himself, then he must pay attention to its cross-country ability. In this regard, both cars boast impressive performance and characteristics. On these pickups you can move freely not only around the city, but also conquer off-road terrain, for the simple reason that this is possible not only with a reliable and unpretentious suspension, appropriate equipment and a lot of auxiliary systems, but also with impressive ground clearance. For the Mitsubishi L200, this parameter is 220 mm (in the most affordable modification it is 200 mm). As for its direct rival, the ground clearance is 227 mm. This is quite enough to freely cope with serious obstacles in your path.

If we consider the driving performance and handling of the Toyota Hilux, then at first glance it may seem that we are not talking about a large pickup truck, but about a standard city crossover. This model has excellent maneuverability, as well as good dynamics. Inside, the driver and passengers can feel all the comfort, since the car simply does not notice any bumps in its path. It is also worth noting that a reliable and unpretentious suspension is installed here. The front uses an independent MacPherson spring system, and the rear has a dependent leaf spring suspension. The car is equipped with anti-roll bars, as well as ventilated disc brakes on each wheel.

As for the Mitsubishi L200, this pickup truck is not much inferior to its more recent rival. The car also confidently holds the road, easily takes turns, and in addition, allows the driver to enjoy every kilometer traveled, regardless of the quality of the road surface. If we talk about the suspension system for this model, then it is by and large the same as that of the rival, with the only exception that drum brakes are used on the rear wheel axle, regardless of the configuration. There are also anti-roll bars at the front and rear to ensure that this massive passenger truck does not roll over during the next turn, and in addition, does not roll too much during sharp maneuvers.

Independent discovery of Toyota Corolla

If for some reason you decide to open the car yourself, you can use the advice of car enthusiasts who have already done this. The most common methods:

knock out the side window and open the door;
the door lock is turned entirely;
take a thin stick, bend the corner of the door, place something soft in the gap and, reaching out, press the button to open the doors;
take a thin stick, bend the corner of the door, place something soft in the gap, insert a wire with a hook and hook the door opening button;
take a thin stick, bend the corner of the door, place something soft in the gap, insert a wire with a hook and pry either the central locking system or the window opening button (if the car is locked while running);
There is molding in the place where the glass disappears into the door. It is carefully pryed up and removed, as a result a gap about half a centimeter wide appears, from which there is access to the door rods. They pull the rod with a wire, and the door opens.

Which cabin filter to buy

Filtration of the air entering the cabin cleans it of dust, unpleasant odors and pathogenic bacteria. But not every filter provides complete cleaning. Let's consider the question of what items are on sale and what is better to choose.

There are two types of filter elements that can be installed in the Land Cruiser 100 - anti-dust and carbon. The former are capable of retaining particles of dust, soot, debris and pollen entering through the air intake. The usual one is made of cellulose or synthetic fibers in the form of a sheet laid like an accordion inside a rectangular plastic frame.

The carbon filter is a more complex structure, consisting of three filter layers , each of which has its own purpose:

coarse cleaning , for large particles of debris, insects;
microfiber with a static charge to retain fine dust, soot, pollen;
molded activated carbon that absorbs odors and various bacteria.

The best coal for purification is coconut, but others provide high quality incoming air. The main and only drawback of carbon cabin filters is the price .

How to open a Toyota Corolla through the trunk?

Drivers repeatedly tried to open the locked car through the trunk. To do this, perform the following steps:

use a thin stick to bend the trunk;
they hook the trunk lock with a wire and open it;
remove the casing;
remove the rear panel and rear seat;
use a thin piece of iron to pry up the latches on the headrests of the rear seats, tilt them forward from the trunk and enter the cabin through the trunk.

The video shows how you can open the trunk, and from there you can easily get into the car interior:

A little about the filling

The number of options in both pickups is amazing. Manufacturers have provided a wealth of technical equipment, including clever systems, useful devices and other options to make any trip comfortable and safe. The pickup truck has seven airbags, power accessories, heated front seats, as well as all mirrors and glass. We are pleased with the wide range of electrical adjustments for the driver's seat.

Toyota HiLux

The safety system in the Hilux is also thought out to the smallest detail: 7 airbags, stability control system, collision avoidance system and a lot of other additional options. There is a rear view camera and a parking assistant. Therefore, consumers rate the Mitsubishi L200 (aka Fiat FullBack) equally highly along with the Toyota Hilux.

How to open a Toyota Corolla if the battery is dead?

Car owners share their experience: what can be done if the battery in a Toyota Corolla is dead. Let's look at different methods.

a tow truck delivers the car to a service station;
attach it to a lift in the workshop, remove the lower protection;
open the hood with special devices;
charge the battery.

pull the cable through the radiator grille;
prying the latch open the hood;
charge the battery.

install a jack;
unscrew the wheel;
remove fender liners and bumper parts;
stretch the wire with a loop to the “+” battery;
The battery is charging.

Attaching an electromechanical lock to the trunk lid

First of all, I found a place to mount the actuator; I didn’t want to drill holes in the trunk, so I screwed the actuator (solenoid) into the existing holes and bolts. I screwed the solenoid with only one self-tapping screw onto the mounting bar, and placed a piece of foam rubber between the housing and the actuator so that it would not dangle. Everything is held securely. I made the rod from aluminum wire, the rod that comes with the kit is too rigid, it is inconvenient to bend it. I lubricated the joints of the wire with CIATIM to prevent rubbing. The solenoid will pull the trunk release rod with the key.

The actuator works in both directions, both retracting and pushing, so depending on the profile of the trunk lid it can be placed in different ways.

Mounting the actuator in the trunk lid of Toyota Corolla 120

Locking the trunk and glove compartment with a service key

By the way, I learned that if you turn the lock cylinder counterclockwise with the key, the trunk will not open from the passenger compartment. At first I thought that the rod had come off when I checked the functionality of the electromechanical lock, so this is a feature of the trunk lock on the Toyota Corolla. This is necessary so that if the car is taken to a service station, close the trunk with the key and give the service key to the servicemen, but the trunk will not open with this key. Although you can easily get into the trunk from the passenger compartment by reclining the back of the rear seat. The glove compartment in the cabin is also locked with a key.

Connecting the actuator to the vehicle's electrical network

I removed the electromechanical lock onto the bolt, to which I also screwed the fastening bar that comes with the actuator. I soldered the connectors to the wires, soldered the grounding ring from wire, somehow it costs a lot in the store, as much as 15 rubles, the traders were completely insolent. I didn’t buy it out of principle, because I know that on Aliexpress they cost pennies, I’ll order a whole set of connectors from my salary, you can choose many different connectors and terminals. I insulated all the connectors with heat-shrinkable tubes, which I purchased on Ali for 50 rubles for 4 meters.

Removing the front and rear bumpers of Prado 150

Removing the front bumper of the Prado 150, as well as the rear, is done as necessary. This operation takes little time and is often performed to improve the functional characteristics of the car or repair it.

Fastening schemes

It is not always mentioned in training videos on how to remove the rear or front bumper on a Prado 150 that the 2015 restyling significantly changed the mounting pattern: it became more complex.

The front bumper uses:

To search for spare parts for the front bumper in catalogs, add “Front bumper” to their names.

Rear bumper fasteners:

To search for a part in the catalog, enter “Rear bumper”.

Instead of original fasteners, you can use similar ones: they are much cheaper than original parts from Toyota, and they are much easier to purchase.

Rear

Some believe that the video on how to remove the rear bumper on a Prado 120 or 150 lacks details: the issue with the headlights, from under which you have to pull out the bumper, is not disclosed. If it is removed to install a tow bar, then working with a newer version of the SUV is easier: you do not need to cut special holes.

The algorithm of actions is as follows:

Remove the mudguards.
Unscrew the corner screws, freeing the bottom.
Unscrew from the frame.
Remove the plug and snap off the trim strip.
Unscrew the fasteners.
Disconnect the light wires from the connectors.
Unclip from the rear fenders (the fender latch extends into the car and in the direction of travel, the bumper latch in the opposite direction). If you can’t snap the part off, remove the headlights and then dismantle them.

Removing the rear bumper of the Prado 150 takes little time, and this operation is so simple that you can easily do it yourself without going to a service station.

Front

Numerous videos that tell how to remove the front bumper on a Prado 150 also reveal the purpose of dismantling the part. In drift cars it is removed, providing the engine with better cooling. Some, on the contrary, do it in front of a more massive one, so that at high speed the car does not lift off the ground.

The Prado cannot be called a car that will fly along the highways, requiring additional weight or engine cooling. The “original” front bumper is removed mainly due to the fact that it does not correspond to the owner’s ideas about the ideal exterior of an SUV.

Tuning the “face” of a TLK most often involves installing a guardrail or suspension protection, replacing the radiator grille or deflector.

To remove the front bumper you need:

Unscrew the front part of the fender liners.
Unscrew the screws holding the top part from the plastic cover.
Unscrew the screws from underneath.
Disconnect the fog lamp wires.
Disconnect the washer line and drain the fluid.
Unscrew the screws located under the arches, closer to the front of the car.
Unclip (the latches are located under the headlights).

What to do if the lock on your car won't open?

And excessive confidence in the success of opening the car yourself can lead to its breakdown. Also, you shouldn’t ask people you don’t know about this. Based on this, attempts to open the car on your own will not only not be successful, but can also cause damage to your car.

We will show you several practical cases of how to open a Toyota Corolla without a key. We press, we pry...

Companies, anticipating the situation with drivers losing keys, often provide their service centers with the tools necessary for opening them. Opening a car without a key Experts do not recommend opening a Toyota Corolla of the year of manufacture yourself or asking neighbors in the parking lot to do it.

In addition to the tools, such a scrupulous procedure requires experience.

So, we lie down under the car under the driver’s seat. Find the drain plug and unscrew it.

Now you need to insert a hammer or stick into the drain hole at an angle towards the back of the driver's seat. Press and pry the trunk release lever.

Now all that’s left is to climb into the trunk, recline the back seat and get into the car’s interior. Well, then it’s a matter of technology. Finding a rope or wire The second method will allow you to open the door itself if the lock is locked.

Toyota Windom key binding

To do this you will need a piece of rope, or thin flexible wire, or twine, or fishing line - whatever you find. The main thing is that the length is enough to cover the width of the door more than two times.

We will have to press the door a little, and then use the lever to pry the upper right corner of the door on the driver's side. We suggest using whatever you can find at hand as a lever, just so as not to scratch the car. This could be a piece of wood, a knife, a screwdriver, or even an unnecessary plastic card. So, we press the door, carefully insert our lever into the gap between the frame and the door and bend it enough so that you can insert a rope or wire into the interior.

60 posts in this topic

Using progressive movements, we gradually push the wire into the interior and lower it to the lower edge of the glass. Now you need to stretch a portion of the rope through the right side of the door, enough to tie a loop on it.

Also, you shouldn’t ask people you don’t know about this. There is a small chance that you will be able to open the car on your own.

Doors won't open with keys

Alarm systems and locks are made in such a way as to prevent car break-ins. Based on this, attempts to open the car on your own will not only not be successful, but can also cause damage to your car. Also, unprofessional attempts to open the lock can greatly complicate the work of a qualified specialist who will open the car. The question of how to open a Toyota Corolla without a key remains unresolved.

Create an account or sign in to comment

Who can correctly and legally open a Toyota Corolla? Seeking help from a company specializing in such work would be an excellent way out of this situation. The specialists of these organizations know how to quickly open the car.

On your part, you will only need to wait for the specialist and pay for his work after completion. By hiring the services of a knowledgeable technician, you avoid having to repair a broken lock, door or broken glass.

A professional has a safe set of tools that cannot be found in stores for public use.

Companies, anticipating the situation with drivers losing keys, often provide their service centers with the tools necessary for opening them. In addition to the tools, such a scrupulous procedure requires experience.

So training is an integral part of the work of a service professional. And excessive confidence in the success of opening the car yourself can lead to its breakdown.

Source: https://autovizov.ru/toyota/%D1%84%D0%BE%D1%80%D1%83%D0%BC-%D1%82%D0%BE%D0%B9%D0%BE% D1%82%D0%B0-%D0%BA%D0%BE%D1%80%D0%BE%D0%BB%D0%BB%D0%B0-38.html

How to open a Toyota Corolla without a key: video instructions on how to get through the trunk

What to do if the lock on your car won't open?

We will show you several practical cases of how to open a Toyota Corolla without a key. We press, we pry...

In addition to the tools, such a scrupulous procedure requires experience.

So, we lie down under the car under the driver’s seat. Find the drain plug and unscrew it.

Now you need to insert a hammer or stick into the drain hole at an angle towards the back of the driver's seat. Press and pry the trunk release lever.

Toyota Windom key binding

Replacing the rear wheel bearing

The rear wheel bearing is replaced as follows:

Raise the vehicle on a jack.
Remove the wheel. Unscrew the caliper.
Remove the brake pipe from the eye.
Remove the cotter pins from the roller.
Pull out the brake disc.
Remove the four hub bolts.
Pull out the axle shaft and hub.
Cut the locking ring with a grinder.
Remove using a chisel and hammer.
Pull out the ABS rotor.
Remove the second locking ring.
Saw through the edge of the inner race.
Remove the separator rollers that are exposed to the car owner.
Take the axle shaft and hit it against the board. The hub will fly off.
Now you can remove all the bearings with a chisel.
Take new ones and press them into the hub.
Reassemble everything in reverse order.

When landing the rotor, do not overdo it. It is better to measure the distance of the rotor during removal in order to seat it at the same depth. Otherwise, all the lubricant will leak out during operation.

Create an account or sign in to comment

A professional has a safe set of tools that cannot be found in stores for public use.

So training is an integral part of the work of a service professional. And excessive confidence in the success of opening the car yourself can lead to its breakdown.

Source: https://autovizov.ru/toyota/%D1%84%D0%BE%D1%80%D1%83%D0%BC-%D1%82%D0%BE%D0%B9%D0%BE% D1%82%D0%B0-%D0%BA%D0%BE%D1%80%D0%BE%D0%BB%D0%BB%D0%B0-38.html

Gate for spare wheel TLC100 in original bumper

Gate for a spare wheel TLC100 in a standard bumper, spare wheel, power body kit, power bumper TLC100, gate for a spare wheel in the original bumper, power body kit, all-wheel drive laboratory

Gate for a spare wheel TLC100 in a standard bumper, spare wheel, power body kit, power bumper TLC100, gate for a spare wheel in the original bumper

Gate for a spare wheel TLC100 in a standard bumper, spare wheel, power body kit, power bumper TLC100, gate for a spare wheel in the original bumper, power body kit, all-wheel drive laboratory

Sources:

https://4-x-4.ru/kak-snyat-zapasku-na-lend-kruzer-100/ https://4×4.media/3509-podgotovki-toyota-land-cruiser-100-k- dalnim.html https://toyota-camry-corolla.ru/land-cruiser/ustanavlivaem-ili-menyaem-salonnyj-filtr-land-cruiser-100/ https://manual.countryauto.ru/toyota/land-cruiser -100/1-5-poddomkrachivanie-i-buksirovka.html https://offroad-group.com/photos/kalitka-pod-zapasnoe-koleso-tlc100-v-rodnoj-bamper/