Toyota fuel filter rav 4: where is it located, replacement

Toyota Rav 4 has been produced since 1994; at the moment, the fourth generation of this car is already in production.

The fuel filter on different generations has design differences, and its replacement has its own characteristics. The scheduled time for replacing the fuel filter on a Rav4 car is 80 thousand km. The recommended replacement period is 50 thousand km.

There are two fuel filters used in cars:

  • coarse cleaning - in the form of a metal or plastic mesh, prevents the penetration of large particles into the fuel system;
  • fine cleaning - the filter element retains small particles, dust, rust, water and some impurities.

The coarse filter is rarely changed - it is enough to wash it in gasoline or diesel fuel, but the fine filter must be changed according to regulations or if there are signs of contamination. A clogged fuel filter reduces engine power and can lead to breakdowns and a complete stop of the vehicle.

Replacing the fuel filter RAV4 III — logbook Toyota RAV4 on DRIVE2

RAV4

admin

Video A car fuel filter is one of the main parts of the car. Speaking about the quality of fuel at gas stations, it is very difficult to do without this part. The main purpose is to clean the fuel from all possible particles and water impurities.

Let's look at how to properly replace the filter on a Toyota RAV 4 SUV.

Where is the fuel filter located and when should it be changed? The main function that the fuel filter performs is to filter gasoline from various impurities and contaminants from entering the system, be it rust, sand, metal particles, etc.

The ingress of such components can negatively affect the operation of the internal combustion engine and lead to breakdown of various engine components. Unlike previous models, in the Toyota RAV 4 III generation the filter element is located in the gas tank inside the fuel module, which serves as a kind of shell in which the fuel pump is located.

This design arrangement is inconvenient because to replace the filter, you must first remove the fuel tank, then remove the module with the filter element.

When performing replacement work, you should be careful and careful so as not to damage anything. According to the service book regulations on maintenance, it is necessary to replace the fuel filter every 80 km.

However, due to the fact that gasoline at gas stations is not of excellent quality, experts recommend replacing it every 40 km.

Dealers advise replacing at specialized stations, but such work can be done with your own hands.

Where is it located and when to change it?

The fuel filter for Rav 4 4th generation 2014, running on gasoline, is mounted in the internal cavity of the tank . It consists of two separate containers that are connected via hoses. Article number of the original filter element 77024-42110 . Among the high-quality analog options, we highlight only the spare part produced by Masuma with the article number MFF-T118A . The coarse filter component is supplied exclusively with the fuel pump, so it is simply washed. If replacement is necessary, we select by size.

On Rav 4 with diesel , the fuel filter is located in the space under the hood . It has article number 23390-33030 and is absolutely identical to the third generation Rav 4 models. Spare parts from the following manufacturers can be used as analogue options:

  • Nipparts – article number J1332057;
  • Sakura – FC-1108;
  • JS Asakashi – FC184J.

Frequency of filter element replacement:

  • 20,000 km – on diesel engines;
  • 80,000 km – on gasoline engines.

In this case, rinse the filter mesh (coarse cleaning) thoroughly. Provided that it is in satisfactory condition.


Diesel fuel filter Rav 4

Toyota Rav4 fuel filter replacement

:

All cars have a fuel system filter element. The compact crossover Toyota Rav4 is no exception. Regardless of the year of manufacture, on all cars equipped with gasoline engines, the unit is installed inside the fuel tank.

Therefore, the answer to the question of where the fuel filter is located in the Toyota Rav4 is the same.

Replacing the fuel filter in a Toyota Rav4 requires a regular set of tools. The work can be done independently in a garage. In this case, there is no need to place the car on a lift or on a viewing hole. The process of disassembling and reassembling the unit requires care, and dismantling and installing the filter element requires mandatory compliance with fire safety rules.

Before you begin replacing the unit, you should purchase a new fuel filter (this element is selected depending on the engine size). When choosing, give preference to a more expensive, but original fuel filter over a cheap one manufactured under license. In this case, its quality and long service life will be guaranteed.

Features of replacing a gasoline fuel filter

The manufacturer did not take care of the correct location of the unit with the fuel filter on all versions of the car. Some modifications provide access to it through a special factory opening located under the rear seat on the driver's side.

In more complex cases, there is no hole at all and replacing the fuel filter requires dismantling the fuel tank. It is advisable to perform it in specialized service centers. Many car enthusiasts independently make a hole in the vehicle body using a special tool.

To determine the location of the hole after dismantling the seat, focus on the raised area in the bottom that has an irregular shape. It is this that needs to be cut off on three sides (from the side of the rear door, driver and trunk). After replacing the filter, close the slots by gluing a layer of self-adhesive noise-insulating material.

Replacement frequency

Before deciding to replace the fuel filter, you should pay attention to the car's performance and mileage. If there is a deterioration in acceleration dynamics, as well as a weak response when pressing the accelerator pedal, then one of the reasons may be a clogged fuel filter.

The manufacturer recommends changing this element as necessary depending on the quality of the fuel used. For cars with gasoline engines, it is recommended to replace them after a mileage of 80-100 thousand km. In diesel versions, this type of maintenance is performed much earlier - at 20 thousand km.

Replacement procedure

In order to gain access to the installation location of the fuel pump (and the filter associated with it), do the following.

  1. Remove the rear seat. The only way to remove the carpet is by unscrewing the bolts and removing the backrest of the rear row.
  2. Using a flat-head screwdriver, pry up the larger hatch, which is held in place by non-drying mastic.
    Do not rush to unplug the connectors; first open the gas tank cap and start the car. Wait a few minutes. This must be done in order to reduce the pressure in the gas line. Otherwise, when removing the fuel pipe, some of the gasoline will spill out.

  3. Unfasten the electrical connectors. To do this, you need to move the yellow clip securing the gas line.
  4. Unscrew 8 bolts around the circumference of the cover with an 8 mm socket.
    Before removing the lid, clean the surface from dust and dirt to prevent debris from entering the tank.
  5. Gently pull up, holding the filter by the protruding parts. At the same time, try not to damage the fuel level sensor float and the L-shaped mesh.

    In all-wheel drive versions, disconnect the fuel pipe coming from the ejection pump and the pump itself to which it is connected. Front-wheel drive versions do not have this part; only a pressure regulator is installed there.

  6. The fuel pump and L-shaped strainer must be replaced.

It is necessary to disassemble the old module in order to rearrange some of the parts from it. These include:

  • fuel pump;
  • sensor with float;
  • sealing rubber securing the L-shaped filter;
  • and a plastic fuel line.

All fasteners are made of plastic, so it is more convenient to use a small flat-head screwdriver. It is more convenient to start disassembling from the bottom of the filter.

Toyota Rav4 fuel filter replacement is complete. Do not rush to install the cover on the sealant. After connecting the fuel line and electrical connector, start the car after tightening the gas tank cap and make sure there are no leaks. If none are found, the car starts up safely, then you can complete the assembly. All operations are carried out in reverse order.

, problems, fuel economy, pros and cons, photos

Updated: March 4, 2021

The RAV4 is known for its practicality and driving comfort. Toyota's best-selling SUV is a popular choice in the used car market. This is a roomy compact SUV car with an economical 4-cylinder or powerful V6 engine.

2011 Toyota RAV4 interior.

The 2006-2012 Toyota RAV4 comes with front-wheel drive or all-wheel drive. Optional third-row seating has been offered but is rarely found. Is the Toyota RAV4 reliable? Which engine is better? What are the problems being reported?

Knocking or knocking sounds when turning the steering wheel left or right can be caused by a worn steering intermediate shaft. Replacing the intermediate shaft costs $320-$480. We also found a few reports where the entire steering rack needed to be replaced, which is more expensive. This forum has more information.

Advertisement - Continue reading below

There have been a number of complaints about a leaking water pump (part of the engine cooling system). A water pump replacement costs anywhere from $320-$580 on a 4-cylinder engine to over $1,000 on a V6. Based on Consumer Reports' ratings, some of the 2006-2008 RAV4s suffered. Faulty ignition coils are also quite common. A bad ignition coil can cause misfiring and engine shaking. When replacing a bad ignition coil, it is recommended that you replace all spark plugs if they are old. In 2015, Toyota released the Warranty Enhancement Program: ZE7 Warranty Coverage Extension for 2AZ engine oil consumption in the 2006-2008 RAV4 2.4L engine; read more on this forum. There have also been a number of complaints about the stripped head bolt threads on the 2.4L engine. Repairs are quite expensive. Check out this great video from Eric O. explaining the renovation. There have also been complaints about oil consumption in the V6 engine in the 2006-2008 RAV4.

2011 Toyota RAV4.

According to Service Bulletin T-SB-0041-13, a short knocking/rattling noise from the 1AR-FE and 2AR-FE engine may be caused by a faulty camshaft gear assembly (VVT gearbox). To fix the problem, you need to replace the gearbox. The bulletin quotes 2.4 hours of labor. This forum has listed many service bulletins.

The 4-cylinder RAV4 model 2006-2008 has a power of 166 hp. The engine is 4L DOHC (2AZ-FE). 2009 and newer RAV4s come with a 2.5-liter inline engine that produces 179 hp. (model 2AR-FE), which is one of the most reliable engines on the market. The optional 269-horsepower 3.5L 2GR-FE V6 turns the RAV4 into a rocket. It is also a very good engine and can last a long time with proper care.

All three engines (2AZ, 2AR, 2GR) have a timing chain; no timing belt. The timing chain does not need to be replaced regularly.

The RAV4 has MacPherson struts in the front and dual-link in the rear.

Electric power steering. Four-wheel brakes are standard. FWD models come with a standard limited-slip differential.

The interior is comfortable with more rear seat space than some larger SUVs. The controls and gauges are simple and easy to use. The steering tilts and the telescope. The front cup holders are illuminated. The 60/40 split second-row seat reclines, slides forward or backward, or folds down for additional cargo space (73 cu.ft. with seats folded). There is a large storage area under the trunk lid. A roof rack is optional.

On the road, the RAV4 feels more like a tall car than an SUV. It handles easily and feels very nimble. The ride is comfortable; Road imperfections are well absorbed. The electric steering is light and responsive. The turning radius is small. Front visibility is very good; The C-pillars are thick, but the large side mirrors help make up for it.

Fuel economy (4 cylinder model), reliability, comfortable ride and handling, decent cargo space, plenty of storage, maneuverability.

2011 Toyota RAV4 2.5L engine.

Second row seat.

The front seats are unsupportive on long journeys, a manual transmission is not available, and the rear gate opens towards the curb.

The Toyota RAV4 is a practical, easy-to-drive small SUV. 2.5L inline-4 (2AR-FE) in 2009-plus RAV4 is the best engine choice; it is economical, reliable and should last a long time if well cared for. The 3.5L V6 is also largely trouble-free, although we found complaints about oil consumption in 2006-2008 V6 models. There were also complaints about the 2.4L 2AZ-FE engine in the 2006-2008 RAV4, including stripped head bolt threads and excessive oil consumption. It is recommended that you check your engine oil level and top it up regularly as driving with low oil levels can cause problems. As of March 2021, Consumer Reports rates the 2006 and 2008-2012 RAV4 models as "Recommended."

EPA Fuel Economy:mpg city/highwayl/100 km city/highway
2009, 2010 RAV4 FWD 2.5L auto22/2810,7 / 8,4
2011, 2012 RAV4 FWD 2.5L auto21/2811,2 / 8,4
2006-2008 RAV4 FWD 2.4L auto21/2711,2 / 8,7
2009-2012 RAV4 4WD 2.5L auto21/2711,2 / 8,7
2006-2008 RAV4 4WD 2.4L auto20/2511,8 / 9,4
2006-2010 RAV4 2WD 3.5L V6 auto19/2712,4 / 8,7
2011, 2012 RAV4 2WD 3.5L V6 auto19/2612,4 / 9,0
2006-2010, 2012 RAV4 4WD 3.5L V6 auto19/2612,4 / 9,0
2011 RAV4 4WD 3.5L V6 auto19/2512,4 / 9,4

The 4-cylinder Toyota RAV4 has some of the best gas mileage for a non-hybrid SUV with all-wheel drive. 2.4-liter 4-cylinder AWD Toyota RAV4 2006-2008 Gets 20 mpg city and 25 mpg highway (11.8/9.4 L/100 km). The 2009-2012 RAV4 2.5L 4-cylinder AWD is rated at 21/27 mpg (11.2/8.7 L/100 km). In primarily highway driving, the 2009 RAD4 four-cylinder AWD can travel up to 413 miles (665 km) on a 15.9-liter (60 L) tank.

During your test drive, watch for whining or humming noises from the transmission. This would indicate a problem. Be careful not to knock, knock or rattle from the steering when driving over small bumps or on uneven roads. When the car is parked, try shaking the steering wheel from left to right; There should be no rattling noises. Beware of leaks. Check the engine oil level; A low oil level may indicate that the engine is consuming oil.

If any of the warning lights come on after the engine starts, this indicates a problem. Some problems that cause the Check Engine Light to turn on can be quite expensive to repair. For example, some problems with the evaporative system may require replacing the charcoal canister; which costs several hundred dollars. Read more: How to Inspect a Used Car - An Illustrated Guide. Before purchasing a used RAV4, have it checked by your mechanic and have it checked for: Safety Recall - NHTSA or Transport Canada - Vehicle Safety Recall

Change your engine oil regularly. Toyota recommends using 5W-20 or 0W-20 oil for the 4-cylinder engine and 5W-30 oil for the V6.

Load Capacity: 73.0 cu.m. feet

Storage compartment.

Keep engine coolant and other fluids clean and topped up. When adding or replacing transmission fluid, be sure to use only the recommended type; The wrong transmission fluid can cause problems. On 4WD models, you also have transfer case oil and rear differential oil that need to be changed at recommended intervals.

The RAV4's all-wheel drive system features an electronically controlled clutch to distribute torque to the rear wheels. This allows the RAV4 to automatically switch from FWD to 4WD when needed. We drove the 4WD RAV4 in a variety of snowy and icy conditions, and it felt secure with winter tires. All V6 RAV4 models, as well as all 4-cylinder models with third-row seating, come standard with Hill-start Assist Control (HAC) and Descent Assist Control (DAC). Samarins.com staff

. problems, fuel economy, driving experience, photos, maintenance tips

Updated: March 6, 2021

The RAV4 name stands for Recreational Active Vehicle with All-Wheel Drive. The RAV4 is available with front-wheel drive or all-wheel drive. It rides on an automotive platform with a 4-cylinder engine and a five-speed manual or four-speed automatic transmission. What makes this vehicle unique is that it features an optional full-time standard AWD system with a viscous limited-slip center differential.

2001 - 2005 Toyota RAV4 (XA-20), (Photo: Toyota Canada)

This means the RAV4 AWD system is always on. Most modern compact SUVs have on-demand all-wheel drive, where the rear axle engages only when needed.

In 2001, 2002 and 2003, the RAV4 was equipped with a 2.0-liter DOHC 1AZ-FE 4-cylinder engine producing 148 hp. Many owners report this engine lasting well over 200K with good maintenance. Starting in 2004, the RAV4 received a 161-horsepower 2.4-liter 2AZ-FE engine. Overall, the RAV4 is a good little SUV, but it's not without its problems; read details below.

The 1AZ-FE and 2AZ-FE engines have a maintenance-free timing chain; no timing belt.

Faulty ECM (engine computer) in 2001-2003 models. May cause problems with automatic transmission shifting. The ECM must be replaced with an updated part to solve this problem. Replacement parts are available, but check ratings and reviews before purchasing.

Advertisement - Continue reading below

Leaking engine valve seals can cause blue or gray smoke upon startup. The air/fuel ratio sensor fails quite often, often causing a P1155 Check Engine Light. Air fuel ratio sensor replacement costs $65-$320 plus $50-$150. The mass air flow sensor may become dirty, causing vibrations when accelerating. A worn steering rack can cause a noise in the steering wheel. Replacing the steering rack can cost between $600 and $1,000. The rear swing door hinges can wear out due to lack of lubrication and a heavy spare tire.

2005 Toyota RAV4 interior. (Photo: Toyota Canada)

This may make it difficult to close the rear swing door. This is why it is important to lubricate the hinges well. Differences in tire pressure or tire size can cause problems with the all-wheel drive system. It is important to maintain the tire pressure at the level indicated on all tires. There are reports of stripping of protectors in the cylinder block of the 2.4AZ 2AZ-FE 2004-2005 engine. Repairs are quite expensive. Symptoms include coolant leaks at the rear of the engine, overheating, misfire at start-up, rough running. We found Toyota TSB T-SB-0015-11 on this issue which states that Time Sert® thread repair inserts must be installed. Check out this YouTube video that shows the renovation.

The RAV4's interior is simple and comfortable, with a high driving position providing good all-round visibility. The controls are conveniently located and easy to use. Fit and finish is good. The rear hatch glass doesn't open separately like in the Honda CR-V, but the low cargo floor makes loading easier. On the downside, cargo space is limited.

The Toyota RAV4 is agile and fun to drive.

2005 Toyota RAV4. (Photo: Toyota Canada)

It handles like a car. Tight cornering makes it maneuverable around town. The engine is a little noisy and lacks power when cruising on the highway, but is very fuel efficient.

Stylish design, full-time performance, versatility, fuel economy, vehicle handling, driving pleasure.

Front seats are not very comfortable, limited space, rear door glass does not open separately, lack of power when passing on the highway, road noise, engine noise, rattling.

Toyota RAV4 EPA Fuel Economy:mpg city/highwayl/100 km city/highway
2001-2003 2WD manual22/2810.7 / 8,4
2004-2005 2WD manual21/2711,2 / 8,7
2001-2003 2WD auto21/2611,2 / 9,0
2001-2003 4WD auto, manual20/2511,8 / 9,4
2004-2005 4WD auto20/2411.8 / 9,8
2004-2005 4WD manual19/2512,4 / 9,4

The RAV4 is one of the class leaders in terms of fuel economy. When driven primarily on the highway, the 2005 FWD RAV4 with manual transmission has a range of up to 346 miles (557 km) on a 14.8 gallon (56 L) tank.

The RAV4 is the rare small SUV with full-time capability. Cargo space is limited, but a roof carrier can help. Maintenance costs are low compared to other SUVs. The 2001-2003 RAV4 has the best engine. Despite the issues mentioned above, the RAV4's overall reliability still isn't too bad considering its age. Competitors include the Subaru Forester and Honda CR-V.

Antilock brakes, traction control, and stability control are standard as of 2004.

Watch for blue or gray smoke or misfires when starting the vehicle after it has been parked for a while. This is usually more noticeable when the engine is started on a cold morning. Smoke is usually caused by bad valve seals. Misfire at startup can also be caused by a leaking head gasket. For 2001, 2002 and 2003 RAV4s, you can check to see if the ECM has been replaced with an updated part. If your check engine light is on, check the problem before you buy the car. When test driving, ensure that the automatic transmission shifts correctly and smoothly in all conditions. Beware of clunky steering noise. Read more: How to Inspect a Used Car - An Illustrated Guide. Inspect the vehicle thoroughly before purchasing.

The RAV4's all-wheel drive system uses a viscous center differential to distribute power to the front and rear wheels. When the front wheels start to slip, more power is transferred to the rear wheels and vice versa. The RAV4 isn't a true SUV, but its all-wheel drive, light weight and compact size give this little SUV some advantages when it gets off the road. We found plenty of off-road videos of the Toyota RAV4.

Keep your tires properly inflated, this is especially important on a four-wheel drive model.

Change the transmission fluid regularly; It is best to use genuine Toyota transmission fluid. You can find the transmission oil capacity in the Specifications section of the owner's manual. Keep all other fluids clean and topped up. 4WD models also require regular transfer case oil and rear differential oil changes. If you notice any automatic transmission shifting problems, take a look before the problem gets worse. Regular oil changes will extend the life of your engine. When replacing a faulty ignition coil, it may be a good idea to replace all spark plugs if they are old. For any repair, it is always better to use genuine Toyota parts. Have your vehicle inspected annually by a repair shop to ensure its safety. You can check the maintenance schedule online at the Toyota Owners website. The same website provides access to an electronic copy of the owner's manual.

(with filter): 2.0 l (1AZ – FE): $4.4 or 4.2 liters. 2.4L (2AZ-FE): $4.0 or 3.8L. SAE 5W – 30 engine oil is recommended.

Samarins.com staff

.

Toyota Rav 4 Fuel Filter Replacement

Changing the fuel filter on a Toyota Rav 4 is actually no different from a similar procedure on any other car, but, just like everywhere else, of course there are little things, points that are worth paying attention to. Changing the fuel filter on a Toyota Rav 4 - abstract based on the text of the article.

articles:

  • Where to find the filter
  • Tools
  • Change
  • Video Car fuel filter. one of the main parts of the machine. Speaking about the quality of fuel at gas stations, it is very difficult to do without this part. The main purpose is to clean the fuel from possible particles and water impurities that remain for our client. Let's look at how to correctly change the filter on a Toyota RAV 4 jeep.

The main function of the fuel filter is to filter gasoline from various impurities and contaminants (for example, rust, sand, metal particles, etc.) from entering the system. The ingress of such components can have a negative impact on the internal combustion engine and lead to breakdown of various engine components.

In contrast to previous models, in the Toyota RAV 4 III generation the filter element is located in the gas tank inside the fuel module (which acts as a kind of shell in which the fuel pump is located).

This design placement is awkward because to change the filter, you must first remove the fuel tank, then remove the module with the filter element.

When performing replacement work, you should be careful and careful not to destroy anything.

According to the service book regulations regarding maintenance, the fuel filter must be changed every 80,000 km. But due to the fact that gasoline at gas stations is not of excellent quality, experts advise changing it every 40,000 km. Dealers recommend creating shifts at specialized stations, but such work is done with your own hands.

Toyota Center Lyubertsy. RAV-4. Replacing the fuel filter

Before you begin replacement work, you need to prepare the necessary tools and materials.

Tools needed to change the fuel filter on a Toyota Rav 4:

  • a knife for removing old glue around the gas tank cap;
  • flat screwdriver and pliers. And of course a new filter, with the number – 77024-42061. As for the selection of spare parts, you should trust a unique filter, this is due to the fact that it comes with a guarantee, and unique parts are always of the best quality.

If all the necessary tools and filter are prepared, we proceed to the replacement. The work performed to replace the fuel filter must be done in an inspection hole on another overpass, and can be divided into 5 steps:

  • dismantling work to remove the fuel tank;
  • removing the fuel module, changing the filter, and also installation work. Removing the fuel tank should be done in the following order:
  • First you need to relieve the pressure in the fuel system. For this purpose, you need to: unscrew the cap of the gas tank filler neck and disconnect the “negative” terminal from the battery.
  • The next step is to carefully remove the rear part that allows accounting (software) of exhaust gases (muffler).
  • For which the design is intended, if the car is all-wheel drive, then it will be necessary to remove the driveshaft.
  • Now you need to disconnect the fuel lines and fuel supply hoses. To be able to prevent contamination of the fuel system (software), the hoses must be plugged with clean rags;
  • The next step is to unscrew the 6 bolts securing the fuel tank using a socket, after which you can remove the 3 clamps and remove the gas tank. While performing this work, you need to be vigilant so as not to destroy the electronic power wires of the fuel pump;
  • Now there is an option to disconnect the power connection terminals and remove the tank;
  • After changing the filter element, installing the tank is carried out in reverse order.
    After removing the tank, proceed to the second step, which is as follows:
  • Using a screwdriver, pry up and remove the hatch, behind which the fuel module assembly is located. Before removing the module, you need to use a vacuum cleaner to remove any dirt so that it does not get inside the tank;
  • Then, using a socket, the bolts securing the fuel module are unscrewed, and it is simply removed.
  • The fuel module is divided into several parts: filter element, fuel pump, fuel coarse filter (mesh);
  • Disassembling the fuel module will not be difficult, the main thing is to be careful not to destroy the plastic fasteners.
  • It is also worth noting that, of course, wash the mesh in gasoline; if it is very dirty, then you should also change it;
  • After installing a new fuel filter, assembly is carried out in reverse order.
    In fact, this is the method used to independently change the fuel filter on a Toyota RAV 4 III generation car.
  • Video of replacing the fuel filter on Toyota Rav 4:

    Source: https://autoviber.ru/tojota-rav-4-zamena-toplivnogo-filtra/

Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]