Camry fuel filter - replacement, v40 2.4 and 3.5, where is it located,

Fuel filter Toyota Camry V40

Everyone should take care of their car. Especially when it comes to the fuel system. Mixtures and impurities found in fuel can negatively affect engine performance. Therefore, every year it comes up with better levels of protection and fuel purification for its cars. Replacing the Toyota Cari V40 fuel filter video will help you figure it out and understand how to correctly and step-by-step carry out the steps to quickly and easily change the gasoline purifier.

A scheduled replacement of consumables is also needed for the fuel filter. According to the manufacturer's recommendations, it should be done every eighty to one hundred thousand kilometers. But think for yourself, this is designed for the European market, where gasoline is many times better in its characteristics (the concentration of negative mixtures is lower).

To replace a Toyota Camry gasoline filter, we need to choose the purifier itself and learn how to update it ourselves in order to save money. For the first time, changing the filter will seem like a difficult and lengthy process, but after the first experience, you will learn how to quickly and easily make scheduled updates.

We do self-diagnosis of Toyota Mark 2 100 (Toyota Mark II)

Price and article number of the original fuel filter and its analogues

The original fuel filter for Toyota Camry 40 with a 2.4-liter power unit has article number 7702433060. Its price varies from 6,000 to 9,600 rubles.

There are analogues of the fuel filter for Camry 40. They are shown in the table below. According to driver reviews, these fuel system filters are in no way inferior in quality to the originals.

The original fuel filter for a Toyota Camry 40 with a volume of 3.5 liters has article number 2330021010. Its price varies from 2000 rubles and above.

For a Toyota Camry 40 with a 3.5-liter engine capacity, you can also purchase a non-original filter element. Its price is significantly lower than the original. Examples of good third-party fuel system filters are shown in the table below.

Tools required for replacement

In order to replace the fuel filter, the car owner will need:

screwdriver;
wrench;
pliers;
special liquid for cleaning the mesh;
rags.

Checking the fuel system

If replacing the filter does not eliminate problems with the startup and operation of the power unit, then it is necessary to check the pressure in the pressure line. For testing, connect a pressure gauge to the ramp (a fitting is provided in the design), and then start and stop the engine. If the pressure in the line decreases immediately, the pressure corrector valve must be replaced.

The part numbered 23280-21010 was installed from the factory (the use of analogues of Alfi Parts WW1061 or Autosicher A2328021010 is allowed).

A drop in pressure occurs due to damage to the rubber rings on the valve or improper installation. To restore functionality, it is necessary to remove and disassemble the module and replace failed parts. If during testing the system pressure is reduced with the engine running, a new pump will need to be installed. It should be taken into account that the performance of the pump depends on the engine displacement. The pumps for the XV40 and XV50 have design differences.

How to change a gasoline filter in a Toyota Camry XV40

In older cars, the gasoline supply elements were located in the engine compartment. The design of modern cars is different, and manufacturers often install part of the equipment in the fuel tank. Therefore, there are Toyota owners who do not know where the Camry 40 fuel filter is located.

Access to the Toyota Camry gas filter is provided by a hole located under the rear sofa. Therefore, the procedure should begin with dismantling the second row seats (there is no need to touch the backrests).

Step-by-step replacement guide

To change the filter on a Camry XV40, you need to:

Place the car on a level area outdoors or indoors with a forced ventilation system. It is recommended to carry out maintenance with a minimum amount of fuel remaining in the tank (with the emergency lamp on).

Remove the rear sofa cushion by pulling the assembly upward at the fixation points of the brackets in the guide bushings in the body. To remove it, you need to carefully insert the brush into the gap between the cushion and the body floor. Latches are located along the edges of the structure.
Use a spatula to pry off the metal inspection hatch through which the wiring harness passes. To increase elasticity, the sealant must be heated with a hair dryer. It is allowed to trim the material with a knife.
Disconnect the electrical wiring plug from the connector on the module (pressing the latch with your finger and pulling the block up), and then move the cover to the side.
Start the engine and use up the fuel in the pipes and ramp under excess pressure.
After stopping the engine, turn the key in the ignition, open the hood and disconnect the battery from the on-board network.
Use a screwdriver to pry up the plastic retaining ring and remove the pressure line from the fitting on the module cover. Since a small volume of gasoline is stored inside the tube, it is necessary to prepare a container with a capacity of 50-100 ml or a dry rag in advance.
Clean the module cover from dirt, and then sequentially unscrew the fastening bolts (8 pcs., designed for an 8 mm wrench or a Phillips screwdriver) of the clamping cover. To remove debris and dust, use a hard-bristled brush and a construction or household vacuum cleaner. Some owners wash off deposits with brake cleaner.
Pull the module vertically upward; when removing, do not catch the float of the fuel level sensor on the neck of the window in the tank.
Place the assembly on a clean surface, and then disconnect the electrical pump and level sensor connectors from the cover.
Separate the side clamps of the clamping bar and remove the element from the guide pins.
Carefully disconnect the plug from the pump connector by pressing the latch with a thin screwdriver.
Remove the casing with the filters, pump and pressure regulator valve installed inside.
Remove the fixing ring located on the end edge of the steel rod with the spring, and then separate the halves of the module body.
Remove the lower part of the filter with the mesh element, and then remove the pressure limiter valve from the seat (the element is installed tightly; removal will require force) with a rubber sealing ring.
Remove the electric fuel pump and then disconnect the power harness connector.
Clean the mesh element using carburetor cleaner and a brush with hard bristles. It is necessary to remove all contaminants that reduce the throughput of the element.
Install a new cartridge and reassemble the module. When connecting the wiring harness to the pump, it is necessary to check the polarity (in case of an error, the motor windings are damaged). When installing the pressure limiter valve, it is recommended to apply silicone grease to the mating surfaces to reduce force.
Insert the module into the tank, tighten the fastening nuts, connect the pressure hose and the electrical wiring plug. Insert the cover into place in the floor of the body; bitumen sealant must be applied around the perimeter of the part to protect the car interior from the penetration of gasoline vapors.
Connect the battery to the on-board network, turn the key in the ignition and wait 5-7 seconds to pump fuel under pressure into the rail, and then test run the engine. If the engine does not start, the procedure should be repeated. Some owners note that after replacing the filter, the crankshaft must be cranked with the starter 3-4 times.

Required parts and tools

To replace, you need to prepare a new gas filter and several tools:

pliers;
screwdriver;
wrench for 8;
rags;
hair dryer;
special solution for cleaning the mesh;
brush.

The original gasoline filter for a Toyota Camry V40 with a 2.4-liter engine differs from the gasoline filter intended for a car with a 3.5-liter unit. Therefore, you should carefully select the spare part according to the catalog number. The article number of the original filter for the Camry V40 2.4 l is 7702433060. The price range is from 6,000 to 9,000 rubles.

The cost of auto parts for the more powerful version of the fortieth Camry is cheaper and starts from 2 thousand. When purchasing, you should use the Toyota fuel filter number for Camry V40 3.5 l 2330021010.

The original coarse filter (mesh) is sold only complete with a pump. But you don’t have to change it, but rinse it well.

If you want to change the mesh, then, with some effort, this filter can be found separately on the ebay resource. Part number from DEKO 232170H070. Also in the catalog its second name may be indicated - PT-25.

Analogs and fakes of the original

When purchasing an original fuel filter, there is a chance of receiving a counterfeit spare part. It can be determined by:

poor processing of plastic at edges and joints;
the presence of yellowness in the shade of plastic;
lack of marking;
difference in weight - the original has 232 g;
The arrangement of the folds of the filter element should be fan-shaped or accordion-shaped.

But do not confuse fakes with analogues. After all, such replacements for the original differ only in that they were not produced by Toyota divisions and partners. Otherwise, they meet all parameters and are produced by licensed enterprises. The most popular analogues suitable for installation on the Toyota Camry 2.4 l are:

JS ASAKASHI filter with number FS6305, which motorists consider the direct “successor” of the original;
auto parts from Japan with code MFF-T110 from Masuma, which has the ideal combination of low price and excellent quality;
German filter number ST 500 from SCT, which has gained popularity due to its reliability.

For cars with a 3.5-liter unit, the most suitable analogues are:

Japanese filter with article number MFF-T103 from Masuma, which is completely identical to the original;
gasoline filter from Italy from Japan Parts, having catalog number FC-234S. However, there are doubts about this company that it is a manufacturer of spare parts, and not packaging containers.

Which one is best?

When selecting a filter, you must consider:

engine displacement;
name and reputation of the company supplying spare parts.

Original fuel filter Toyota Camry V40

On XV40 cars, when using a 2.4-liter engine for fuel purification, the plant installed a cartridge 77024-33060 (price from 4.8 thousand rubles). The coarse fuel filter does not have an article number and is not supplied to the spare parts market (it is supposed to be replaced complete with an electric pump). Car owners are forced to use analogues or wash the old product with carburetor cleaner or other organic solvent.

When installing a 3.5-liter engine, a fine filter with article number 23300-21010 was used (differing in design and price reduced to 2 thousand rubles).

The original screen element 23217-0C010 is available on the aftermarket.

Original fuel filter Toyota Camry V50

The standard equipment on the Toyota Camry V50 uses a fine filter 77024-33090 (cost from 4.7 thousand rubles), which is supplied to the spare parts market. On cars with a 3.5-liter power unit, a cartridge 77024-33180 is used (price from 4.3 thousand rubles). It is impossible to purchase an original fine coarse mesh (regardless of engine size).

Analogs and fakes of the original

Since original Toyota components are expensive, many owners switch to components from third-party suppliers. When determining the part number, you must take into account the VIN number of the vehicle.

However, indicating the serial number of the machine does not protect against purchasing the wrong part (a similar situation may arise when selecting the original).

Analogues suitable for Camry V40:

For cars with a 2.4 liter engine, they use FS6305 manufactured by JS Asakashi, which is the official supplier for Toyota factories. The price starts from 1.7 thousand rubles. It is allowed to use spare parts Masuma MFFT110 (1.3 thousand rubles) or SCT Germany ST 500 (1.5 thousand rubles). If you need to replace the mesh, it is recommended to purchase a part from the manufacturer Deco (article 23217-0H070) or Krauf (code KR1148F). The price of components does not exceed 600 rubles.
In the case of using a 3.5-liter engine, it is possible to install an analogue of the JS Asakashi FS6300 (price about 700 rubles) or Masuma MFFT103 or Japan Parts FC-234S products (will cost the owner up to 500 rubles). Please note that the module has an original grid configuration without a guide cutout. The original is supplied as spare parts. In case of repairs, owners use products with article number 232170C010 from Toyota (price from 550 rubles) or KR1003F from Krauf (cost no more than 110 rubles).

When to replace the fuel filter

Experienced motorists recommend that you familiarize yourself in detail with the operating conditions, which clearly indicate the frequency of replacement of consumables.

According to the technical manual from Camry manufacturers, the procedure for updating the fuel filter should be performed every 80 thousand km. At the same time, it is necessary to change the filter mesh or at least wash it with a special product.

Signs of a clogged gas filter:

characteristic uneven sound of the fuel pump;
increased fuel consumption;
reduction in engine power;
uneven operation of the motor;
the engine stalls;
the engine does not start.

But high quality domestic fuel is rare. Therefore, you will have to replace the fuel filter on a Toyota Camry more often than prescribed by the work regulations. The optimal service life of a gas filter is 20-30 thousand km with daily use.

If the car sits idle more than it drives, then the fuel filter needs to be changed at least once every 2 years.

Main signs of a clogged filter

The fuel filter becomes unusable gradually, so it is quite difficult to judge its condition during the operation of the car. It may become clogged much faster than you drive 20 thousand kilometers. Here you need to pay attention to the signs of the car's behavior.

The most common signs of blockage are:

Unstable engine operation, in particular, “sneezing” and instability at low speeds.
Noticeable drop in power.
Increased fuel consumption compared to normal levels.

If your car has one of the above problems, be sure to check the condition of the fuel filter.

Fuel filter Toyota Camry V40

The Toyota Camry V40 on the domestic market was officially supplied with gasoline engines with volumes of 2.4 and 3.5 liters. In terms of configuration and characteristics, it is most similar to the Camry, which is supplied to the US market.

The fuel system on the Camry 40 is designed the same as on most modern cars. Fine and coarse fuel filters are placed in a single module together with the pump and installed in the tank. The filter for the Toyota Camry v40 differs depending on the engine being installed. Moreover, this applies to both the fine filter and the mesh filter.

How often should I change

The Toyota Camry manufacturer sets the frequency of replacing the fuel filter for models V30, 40, 50 - at least once every 80 thousand km. This indicator is not accurate; it largely depends on the quality of the fuel that the car owner uses. You need to focus on it if your car has traveled the specified number of kilometers and the fuel filter is working properly. If it is not replaced, as recommended by the manufacturer, then the breakdown will not take long to happen and may happen at the wrong time.

Practice shows that replacing the Camry v50, V40, V30 fuel filter is necessary more often - after 30 thousand km. Typically, at this mileage, signs of clogging will begin to appear. If this happens, you should contact a service station or replace the unit yourself, since the fuel filter has stopped working properly and may allow small debris to pass through, which threatens to damage the injection system and the engine as a whole.

Fuel filter Toyota Camry v40 2.4

Original fuel filter 7702433060

On the Camry 40 2.4, a fuel filter with article number 7702433060 . The average price of a part is 6,000 rubles. The manufacturer is not indicated, neither on the packaging nor on the part itself. Many drivers noticed that the original filter is almost identical to what JS ASAKASHI makes, its number is FS6305 . Therefore, many Camry 40 car owners agree that the above-mentioned filter is a direct analogue of the original. Among drivers, the FS6305 is much more popular than the original, primarily because its price is on average 2 times lower - 1300 rubles.

The filter mesh, installed from the factory, is not sold separately and is only assembled with the fuel pump. The most suitable and popular original part is the mesh from DEKO under article number 232170H070 . Price – 600 rub. It also has another name - PT-25 .

Fuel filter dimensions 7702433060 for Camry 40 2.4

Due to the excessive cost of the original fuel filter, substitutes are also in great demand among drivers. The most popular of them:

MFF-T110 . Manufacturer: Masuma, Japan. Price - 1000 rub. This spare part is also popular among owners of the Camry v40 due to its low price and similar quality to the original;
ST 500 . Manufacturer – SCT, Germany. Price – 1100 rub. This filter has similar quality to the original. Many drivers recommend installing it because of its reliability.

Fuel filter Masuma MFF-T110

Fuel filter SCT ST 500

Purpose of the filter

Many motorists have experienced first-hand that the quality of modern fuel leaves much to be desired. Often it contains various impurities such as sand, rust or metal scale. Without a filter, all this gets into the internal structure of the motor and can lead to breakdown. As a result, the driver will have to carry out expensive major repairs.

Also, the operation of the filter is closely related to the integrity of the candles. Untreated fuel burns only partially in the chamber, forming a deposit that settles on the cylinder walls and spark plugs. Because of this, the efficiency of the motor decreases significantly, and the service life of the spark plugs decreases.

Fuel filter Toyota Camry v40 3.5

On a Toyota Camry v40 with a 3.5 liter engine, a fuel filter with article number 2330021010 . Price – 1600 rub. As in the first case (with a 2.4 engine), there is no exact information about the manufacturer of this part.

Original fuel filter 2330021010

JS ASAKASHI also has an identical filter FS6300 , which, according to most car owners, is a direct analogue of the original Toyota fuel filter 2330021010 . FS6300 filter is 540 rubles.

It is worth noting that there are counterfeits of the original Toyota fuel filter 2330021010 . The main distinguishing features of a counterfeit part:

poor processing of plastic edges of the part;
the shade of the fake is more yellowish;
there are no markings on the part itself;
differences in weight. Weight of the original (without packaging) – 232 g;
the usual arrangement of folds of the filter element. In the original, it is made in the form of an accordion, which increases the filtration area.

The mesh filter (coarse cleaning), which is installed by the manufacturer on the Camry 40 with a 3.5 engine, has article number 232170C010. Price – 450 rub. from part 232170H070 (which is installed on the Camry 40 2.4) in its more elongated shape and the absence of a cutout.

How to change the fuel filter on a Toyota Camry with your own hands

» data-medium-file=»https://www.mymirtoyota.com/wp-content/uploads/2016/02/P1100490.jpg» data-large-file=»https://www.mymirtoyota.com/wp -content/uploads/2016/02/P1100490.jpg" class=»lazyload wp-image-1682″ svg+xml,%3Csvg%20 alt=»Fuel filter Toyota Camry V40″ width=»560″ height=»315″ data-srcset=”https://www.mymirtoyota.com/wp-content/uploads/2016/02/P1100490.jpg 645w, https://www.mymirtoyota.com/wp-content/uploads/2016/02/ P1100490-150×84.jpg 150w" data-sizes="(max-width: 560px) 100vw, 560px" />

Fuel filter Toyota Camry V40

Reasons that negatively affect the Toyota Camry V40 fuel filter

"data-medium-file="https://www.mymirtoyota.com/wp-content/uploads/2016/02/56784084a7d2d.jpg" data-large-file="https://www.mymirtoyota.com/wp -content/uploads/2016/02/56784084a7d2d.jpg" class=»lazyload wp-image-1683″ svg+xml,%3Csvg%20 alt=»Immersed petrol filter Toyota Camry» width=»535″ height=»402″ data-srcset=”https://www.mymirtoyota.com/wp-content/uploads/2016/02/56784084a7d2d.jpg 650w, https://www.mymirtoyota.com/wp-content/uploads/2016/02/ 56784084a7d2d-150×113.jpg 150w" data-sizes="(max-width: 535px) 100vw, 535px" />

Toyota Camry submersible gasoline filter

Of course, if you notice a deterioration in the fuel supply, then there may be a problem with the fuel pump. But first of all, focus on replacing the fuel. There are two ways to conditionally determine the malfunction of the “gasoline system”:

when the engine is running, changes in speed occur (there is a feeling that the car is not receiving enough fuel),
at maximum load on the car engine, “traction” disappears, the speed drops and the engine runs jerkily. Poor atomization of gasoline occurs, which leads to misfires.

The problems that arise may be due to the fact that the filter has already “outlived” its operational period. Please note that these malfunctions can only “conditionally” be caused by a dirty gasoline filter. Provided that it was replaced eighty plus thousand kilometers ago.

Diagnostics of the Toyota Camry fuel system (identification of causes related to fuel filtration)

"data-medium-file="https://www.mymirtoyota.com/wp-content/uploads/2016/02/1.jpg" data-large-file="https://www.mymirtoyota.com/wp -content/uploads/2016/02/1.jpg" class=»lazyload wp-image-1684″ svg+xml,%3Csvg%20 alt=»Toyota Camry fuel system» width=»534″ height=»331″ data -srcset=”https://www.mymirtoyota.com/wp-content/uploads/2016/02/1.jpg 557w, https://www.mymirtoyota.com/wp-content/uploads/2016/02/1 -150×93.jpg 150w" data-sizes="(max-width: 534px) 100vw, 534px" />

Toyota Camry fuel system

One of the options for checking or, one might say, “diagnostics” of a gasoline filter is to measure the gasoline pressure in the engine. Everything is very easy. By simply pressing the gas pedal we try to generate maximum load at high speeds. If the above problems occur, you can “by eye” determine whether enough gasoline is getting into the engine.

Which Toyota Camry fuel filter is best?

Hundreds of manufacturers offer a universal fuel filter for Toyota Camry. But which one is best? First you need to consider the full characteristics of gasoline purifiers. Find out what protection properties and operational data they have. Only you can decide which brand of cleaner to install.

It is strongly recommended to use an original Toyota filter. The cost of the filter will be much higher than that of analogues. It is also worth considering that the manufacturer produces a cleaning element with the most accurate characteristics and operational data, which means: “set it and forget it.”

Original fuel filter Toyota Camry V40

» data-medium-file=»https://www.mymirtoyota.com/wp-content/uploads/2016/02/P1100489.jpg» data-large-file=»https://www.mymirtoyota.com/wp -content/uploads/2016/02/P1100489.jpg" class=»lazyload wp-image-1685″ svg+xml,%3Csvg%20 alt=»Original filter Toyota Camry V40″ width=»537″ height=»302″ data-srcset=”https://www.mymirtoyota.com/wp-content/uploads/2016/02/P1100489.jpg 645w, https://www.mymirtoyota.com/wp-content/uploads/2016/02/ P1100489-150×84.jpg 150w" data-sizes="(max-width: 537px) 100vw, 537px" />

Original filter Toyota Camry V40

For Camry 40, the original gasoline filter is sold only complete with a fuel pump. If you find a separate filter somewhere, check it for originality; it may be a fake. Filter Toyota Camry V40 code 77024-33060.

Original fuel filter Toyota Camry V50

"data-medium-file="https://www.mymirtoyota.com/wp-content/uploads/2016/02/1440252-1-700×503.jpg" data-large-file="https://www .mymirtoyota.com/wp-content/uploads/2016/02/1440252-1.jpg" class=»lazyload wp-image-1686″ svg+xml,%3Csvg%20 alt=»Original filter Toyota Camry V50″ width= »536″ height=»384″ data-srcset=»https://www.mymirtoyota.com/wp-content/uploads/2016/02/1440252-1-700×503.jpg 700w, https://www. mymirtoyota.com/wp-content/uploads/2016/02/1440252-1-768×552.jpg 768w, https://www.mymirtoyota.com/wp-content/uploads/2016/02/1440252-1-326 ×235.jpg 326w, https://www.mymirtoyota.com/wp-content/uploads/2016/02/1440252-1-150×108.jpg 150w, https://www.mymirtoyota.com/wp-content /uploads/2016/02/1440252-1.jpg 800w" data-sizes="(max-width: 536px) 100vw, 536px" />

Original filter Toyota Camry V50

The submersible fine filter for Toyota Camry V50 has a high degree of cleaning. It is recommended to install the original Toyota cleaner 77024-33090.

Step-by-step instructions: replacing the Toyota Camry fuel filter

The filter elements of the Toyota fuel system gradually moved from the engine compartment directly to the car’s gas tank. In order to update the Toyota Camry fine cleaning element, you need to “get” to the technological hole, which is located under the rear seat.

The process of replacing a gasoline filter is very labor-intensive and time-consuming. First of all, pay attention to compliance with safety measures, since you will be working in conditions with a high concentration of gasoline vapors. It is strongly recommended to be careful. The slightest spark from synthetic clothing can cause a fire.

So, first of all, we remove the seat, under which the technological hatch is located. The hole itself is attached to a thick bitumen mixture.

» data-medium-file=»https://www.mymirtoyota.com/wp-content/uploads/2016/02/P1100482.jpg» data-large-file=»https://www.mymirtoyota.com/wp -content/uploads/2016/02/P1100482.jpg" class=»lazyload wp-image-1687″ svg+xml,%3Csvg%20 alt=»Technological sunroof Toyota Camry» width=»535″ height=»301″ data -srcset=”https://www.mymirtoyota.com/wp-content/uploads/2016/02/P1100482.jpg 645w, https://www.mymirtoyota.com/wp-content/uploads/2016/02/P1100482 -150×84.jpg 150w" data-sizes="(max-width: 535px) 100vw, 535px" />

Technological hatch Toyota Camry

After “opening” the hatch, we will see a hermetically sealed fuel pump. Disconnect the fuel pipe and also disconnect the set of wires from the cap. Before removing the fuel pump, its upper part must be cleaned of dust and dirt. Then unscrew all the bolts around the body and take out the ring.

» data-medium-file=»https://www.mymirtoyota.com/wp-content/uploads/2016/02/P1100483.jpg» data-large-file=»https://www.mymirtoyota.com/wp -content/uploads/2016/02/P1100483.jpg" class=»lazyload wp-image-1688″ svg+xml,%3Csvg%20 alt=»Toyota Camry technological sunroof in the open state» width=»535″ height=» 301″ data-srcset=”https://www.mymirtoyota.com/wp-content/uploads/2016/02/P1100483.jpg 645w, https://www.mymirtoyota.com/wp-content/uploads/2016/ 02/P1100483-150×84.jpg 150w" data-sizes="(max-width: 535px) 100vw, 535px" />

Technological hatch Toyota Camry in the open state

When we have disconnected all the elements of the body from the car body, we remove the fuel pump along with the filter from the gas tank. The mesh, which is part of the cleaning system, will be dark in color. It needs to be washed, then blown and dried; we will need it to install a new filter element. The mesh is replaced less frequently than the purifiers themselves (since it serves as a rough protector for the fuel from large debris).

» data-medium-file=»https://www.mymirtoyota.com/wp-content/uploads/2016/02/P1100500.jpg» data-large-file=»https://www.mymirtoyota.com/wp -content/uploads/2016/02/P1100500.jpg" class=»lazyload wp-image-1690″ svg+xml,%3Csvg%20 alt=»Toyota Camry fuel purifier elements» width=»535″ height=»301″ data-srcset=”https://www.mymirtoyota.com/wp-content/uploads/2016/02/P1100500.jpg 645w, https://www.mymirtoyota.com/wp-content/uploads/2016/02/ P1100500-150×84.jpg 150w" data-sizes="(max-width: 535px) 100vw, 535px" />

Toyota Camry fuel cleaning elements

Let's disassemble the cleaning system. As you can see in the photo, it contains: a fuel level sensor in the gas tank, a pump with a coarse mesh and a valve for regulating gasoline.

Next, we assemble all the new elements for the fuel filter. Then screw the ring tightly. Try to close the lid as tightly as possible so that gasoline vapors do not escape and enter the cabin.

» data-medium-file=»https://www.mymirtoyota.com/wp-content/uploads/2016/02/P1100504.jpg» data-large-file=»https://www.mymirtoyota.com/wp -content/uploads/2016/02/P1100504.jpg" class=»lazyload wp-image-1691″ svg+xml,%3Csvg%20 alt=»Ring of the technological hatch in assembled state» width=»535″ height=»301 ″ data-srcset=”https://www.mymirtoyota.com/wp-content/uploads/2016/02/P1100504.jpg 645w, https://www.mymirtoyota.com/wp-content/uploads/2016/02 /P1100504-150×84.jpg 150w" data-sizes="(max-width: 535px) 100vw, 535px" />

Assembly hatch ring

After completely assembling the housing of the technological hole to its original position, we test run the Toyota Camry. This engine diagnostics will allow us to get rid of air trapped in the gas system. We leave the car idling for a while. Within a couple of minutes, all the air will be released and our Toyota will be ready for use. This will complete the process of replacing the fuel filter for Toyota Camry.

Updating filter elements will not always be noticeable to the driver. Especially if you carry out scheduled replacements according to the regulations (80,000 - 100,000 mileage). This type of preventive maintenance will be beneficial for the engine and its fuel system. Refuel only with high-quality gasoline and timely perform scheduled maintenance to replace consumables.

Video: replacing the fuel filter Toyota Camry v40

Precautionary measures

Basic safety rules:

work on removing the module from the tank should be carried out outdoors or in a room equipped with forced ventilation;

before removing the fuel pipes, relieve pressure by starting the engine with the fuel pump plug removed;

to reduce the risk of fire, disconnect the battery from the on-board network;

To illuminate the workspace, use a lamp with a protective shade that can withstand impacts.

Since the work involves the risk of spilling gasoline, it is recommended to prepare a carbon dioxide or foam fire extinguisher. It is strictly forbidden to use open fire or smoke, as the slightest spark will ignite fuel vapors. The module opening in the tank cap should be temporarily closed to reduce the release of gasoline vapors into the air. If the owner of the car does not have the skills to repair equipment, then it is recommended to contact a service center, which will save time and eliminate the risk of additional costs due to broken parts.

Source

Fuel filter Toyota Camry v40 2.4

Fuel filter dimensions 7702433060 for Camry 40 2.4

Due to the excessive cost of the original fuel filter, substitutes are also in great demand among drivers. The most popular of them:

Replacement

The replacement process cannot be called complicated. Those who have practical repair experience will not have any difficulties. Before starting the procedure, you need to prepare the tools that may be needed:

a set of keys;
Phillips screwdriver;
brush.

Next, you should proceed directly to replacing the Camry 40, 30, 50 fuel filter :

It is necessary to remove the rear seat sofa.
You will see a hatch. Open its cover, but you need to do this carefully, it is attached with a wire.
Disconnect the terminal by pressing the tab and pulling it towards you.
Take a brush and clean off any dust that may have accumulated under the lid.
Disconnect the hose; to do this, just pry up the brackets with a screwdriver and move the stopper to the side.
Using a screwdriver, unscrew the protective cover, which is attached to several screws, and remove it.
After this, the entire structure can be removed from the tank.
Disconnect the contacts and the two latches that secure the plastic bezel.
Disconnect the wires.
At the top of the structure there are several more latches that can be removed using a screwdriver.
Remove the filter itself from the housing.
Disassemble the housing (disconnect the bottom cover, fuel pump, pressure valve, fuel sensor).
Assemble all the parts for the new spare part and install it in place.
Start the car.

Replacing the fuel filter v40 2007

Mileage 85,000. At 80,000 I did everything except replace the fuel filter. I haven’t been serviced by a dealer for three years, their price tags are prohibitive. I arrived at the store, the manager, the son of my friend, who himself works at a service station, offered to buy not the original filter, but a replacement JS Asakashi, saying it had been tested, there were no complaints. The mechanic at the service station said that I was doing something stupid, that I should install only the original one. The end result is disastrous. It became embarrassing to start the car. In the morning I come to the garage. The car starts as before, right off the bat, as they say. Once you drive it, it starts... The starter oils six or seven times. And he started it, immediately turned it off, started it again - holes, holes, holes. The mechanic who installed it says, buy an original Toyota one and install it again. Has anyone encountered such a problem? I opened Repair without problems TOYOTA CAMRY “Fuel injection system malfunction”, maybe it’s some sensor that’s gone bad? If you connect the computer to a service station, will it show a fault? What to do?

What is a filter for?

No one is immune from the use of low-quality fuel; it occurs everywhere. To eliminate the harmful effects on the engine of rust, metal chips and other impurities that may be found in the fuel, a fuel filter is installed. Its task is to retain small debris so that it does not get into the motor, as this will lead to breakdown and, as a result, to expensive repairs.

If a filter replacement is necessary before the deadline set by the manufacturer, drivers most often notice this. The car loses power, has difficulty starting, the engine is unstable, especially at low speeds, and may stall. This indicates that the filter has stopped performing its functions normally and needs to be replaced.

Required parts and tools

To replace, you need to prepare a new gas filter and several tools:

pliers;
screwdriver;
wrench for 8;
rags;
hair dryer;
special solution for cleaning the mesh;
brush.

Original petrol filter Camry XV40 2.4

The original coarse filter (mesh) is sold only complete with a pump. But you don’t have to change it, but rinse it well.

Coarse filter

Main stages of the procedure

Replacing the fuel filter in a Toyota Camry is not particularly difficult. All actions will take you up to 30 minutes. To replace the fuel filter, follow these steps:

Remove the rear sofa in the cabin. It's held on by a few latches, so just pull it up from the edges.
You will see the fuel filter cap. It needs to be opened. Be careful as it is still connected to the structure with a wire.
Next you need to remove the terminal. Press firmly on the tab and then pull up.
Use a brush to remove dust from the area under the lid.
To disconnect the small hose, carefully pry up the two brackets with a screwdriver, and then move the stopper to the side.
The protective cover is held in place by a few screws. Unscrew them using a screwdriver. Remove the cover.
Now you can completely remove the entire structure from the tank.
Then you need to disconnect the fuel filter directly. First, disconnect the two terminals (each with two wires).
There are two latches on both sides of the cylindrical structure. Pull them up and then remove the plastic rim.
Disconnect another contact from the filter.
Use a screwdriver to unscrew some of the latches on the top. Remove the fuel pump from the plastic housing. Then disconnect the valve.
Place the rubber ring and contacts with wires into the structure of the new filter.
Reinstall the valve and insert the pump back into the new filter.
Connect the float to the entire structure, as well as the corresponding contacts with the wires.
Reinstall the filter in the car in reverse order.