Battery for Toyota Camry 40: what to do if it runs out, the main reasons for the lack of charge, sizes and technical characteristics, which one to choose and how to replace it

A class “D” car, known all over the world, having 7 generations and several restylings and modifications, recognized as one of the best on the entire planet - Toyota Camry. The car has been produced since 1982, and still remains one of the best on the market, which once again proves the high popularity of the model.

Translated, “Camry” means “Crown”, and the build quality and driving performance of the car fully justify its name. But, like any car, the Toyota Camry has a battery that will require replacement over time. Which Toyota Camry battery is ideal for replacement?

Factory

In the standard version, the battery of a Toyota Camry car is a battery from one of the Japanese manufacturers (and some foreign): Panasonic; Yuasa; Varta. The battery is Asian standard with right-hand positive, and this polarity must be taken into account when replacing.

In any generation, you can find only two sizes that are ideal for Toyota Camry, regardless of body modification (V10; V20; V30; V40; V50, etc.):

261*175*223 (70Ah).
230*175*223 (60Ah).

The battery is located near the left headlight, and the factory recommends installing batteries with dimensions identical to the standard ones, but installing batteries of a European standard is allowed.

The dimensions of such batteries should be:

243*175*190 (54-60Ah)
278*175*190 (70-77Ah) – not suitable for all bodies, and is selected individually.

Toyota Camry car

When choosing a battery for a Toyota Camry, you must remember that there are a huge number of consumers in the car, so batteries with increased capacity (75Ah) are a priority.

This is due to the fact that the generator, with a large number of equipment turned on, may not be able to cope with the load, and additional devices may operate from the battery, discharging it.

Batteries with a larger capacity, even in a discharged state, are able to start the engine and crank the starter, more reliably than a battery with a smaller capacity.

Selection

If the battery is dead and does not charge (has become unusable), then it is worth choosing a suitable replacement option.

When choosing a new battery, you need to remember and take into account several main factors:

Maintain polarity (right plus);
The optimal capacity is 70-80Ah, and the dimension is 261*175*223mm.

It is also possible to install other suitable dimensions, but it is better to follow the optimal values recommended by the manufacturer, but it is worth remembering that there may be individual dimensions for a specific configuration, so before purchasing you need to check the information in the car’s operating manual or with a specialist.

Battery in a car

Analogs

When standard battery models do not suit the car owner for some reason, you can choose a battery from another manufacturer, but which one should you choose? From the huge number of proposals, the following models and manufacturers need to be highlighted:

Asian Horse (70Ah) – battery from Serbia, manufactured using the most modern technologies. Frost-resistant, one of the best Toyota Camry 2.5L batteries. It has resistance to self-discharge and a long working life.

Asian Horse (70Ah)

Tyumen Asia (75Ah) – battery made in Russia. Fully adapted to winter frosts and summer heat. The advantage of this brand is not only high quality, but also low price. All this makes this battery ideal for the Toyota Camry 2.5L.

Tyumen Asia (75Ah)

Smart Element 75D26L (70Ah) is a fairly cheap option that meets all quality requirements. Allows you to save money and install the ideal Toyota Camry V40 2.4L battery.

Smart Element 75D26L (70Ah)

Perion (68Ah) - the battery is produced in the same factories as such global giants as Varta and Bosch. One of the few brands where you won’t have to overpay for brand promotion, while getting a battery that is in no way inferior to competitors, and in most characteristics, even superior to them. Perfect for Camry V40 2.4 liter.

Perion (60) – battery

MUTLU SFB M2 (70Ah) is a new generation battery, manufactured using the most modern equipment and the latest technologies. Huge service life, increased performance compared to analogues, resistant to self-discharge. One of the best battery options for Toyota Camry V50.

MUTLU SFB M2 (70Ah)

Flagman (80Ah) - premium batteries at an affordable price, designed for cars with a lot of electronics. One of the best on the market. They are famous for their reliability and resistance to weather conditions. Ideal for Camry V50.

Battery Flagman

These are the best batteries in their classes, and this title is backed by millions of sales and only positive reviews from car owners.

Replacement

To replace an old battery with a new one, you must perform the following steps in order:

In order for the car owner to remove the battery, it is necessary to remove first the negative terminal, then the positive one.
Loosen the fastening of the plate (pressure).
Remove the plate and take out the battery.

To install a new battery, you need to follow the above steps in reverse order. After installation, it is necessary to check the terminals for the absence of foreign substances and contamination.

car battery

Attention: when installing, attach the positive terminal first, then the negative one.

Important: all actions with the battery must be performed only with the engine turned off! Removing the terminals while the power unit is on can lead to further electrical problems.

When replacing the battery, there will be a temporary loss of power to the on-board network - this can lead to blocking of the radio. To activate it you will need a special code specified in the instruction manual.

If the data is reset, after a few hours of operation new data will be recorded, and the car will again become optimized for each car owner.

The bottom line is this: it is necessary to periodically monitor the condition of the battery in order to know exactly when it will need to be replaced or charged. Otherwise, this threatens to discharge the battery, and in the most extreme cases - failure, at the most inopportune moment.

Source: https://akkuminfo.ru/vybor/akkumulyatory-na-tojota-kamri

Selection

If the battery is dead and does not charge (has become unusable), then it is worth choosing a suitable replacement option.

When choosing a new battery, you need to remember and take into account several main factors:

Maintain polarity (right plus);
The optimal capacity is 70-80Ah, and the dimension is 261*175*223mm.

Battery in a car

Battery for Toyota Camry, what to do if it’s dead, which one to choose

Battery for toyota camry

During the summer months, after long trips, the engine becomes very hot and it is often difficult to restart it.

Selecting and replacing a Camry battery Camry in Japanese is a crown. 3 What to do if the battery is dead....

But this will help someone.

There are known cases where batteries with a smaller capacity and size were installed. This is not scary - after a while, new data is written to memory, and the machine starts working like.

Maintenance-free batteries are usually equipped with a special color indicator. When the spot in the indicator viewing window turns black, charge the battery immediately.

Having finished checking the electrolyte density, you should measure the battery output voltage using a digital voltmeter.

Before connecting the voltmeter, remove the surface charge from the battery - turn on the high beams for approximately 10 seconds, then turn off all on-board electrical consumers and wait about two minutes.

With the engine off and electrical consumers disconnected, connect the black voltmeter probe to the negative terminal of the battery. Connect the red probe to the positive terminal.

The battery output voltage should be The nominal value of the electrolyte density is determined depending on the ambient temperature and is directly proportional to it - use the temperature map supplied by the manufacturers with the battery.

If the results of the tests described above are positive, there is no need to test the battery under load.

A more accurate check of the battery condition can be done using a universal meter; ask at car accessory stores.

The device allows you to determine the battery’s ability to crank the starter and supply power to on-board electrical consumers at increased engine loads.

Connect the meter to the battery terminals.

Follow the instructions of the device manufacturers - when the load is turned on for a second, the battery voltage should not drop below value 9.

Replacement The negative lead is always disconnected first and connected last! Disabling the battery inevitably leads to erasing the information about optimal settings stored in the engine management system's memory, turning off the clock, destroying the security code entered into the radio, etc.

Before disconnecting the battery, carefully read the recommendations below: On models equipped with a single lock, do not forget to remove the key from the ignition switch and put it in your pocket - when the battery is connected, all doors will automatically lock; Disabling the battery will erase all accumulated settings from the ECM memory except the basic settings. These parameters include: Before disconnecting the battery, read the diagnostic parameters.

Selecting and replacing a Camry 40 battery

Camry in Japanese is a crown. This name indicates that it is a high-class car. And like all cars in the premium segment, the Camry 40 has a high level of energy consumption. When the air conditioner, headlights and radio are simultaneously turned on at idle, the generator cannot cope and a powerful battery helps smooth out drawdowns in the network.

If you buy a battery with a low starting current (up to 600 A), there will be problems with starting the engine. In severe frost, the car may not start at all. The result is interruptions in the operation of devices and a reduction in battery life. Therefore, you need to approach the choice of battery wisely - the overall condition of the car depends on it.

What to do if the battery is dead

However, you should keep in mind that on cars equipped with too “smart” on-board computers, attempts to start the car manually can end very, very badly. For such cases, the methods described below should only be used as a last resort.

On cars with injectors, instead of trying to “light it,” it is much better and safer to connect the battery in parallel with someone else’s. After about ten minutes, the battery will have accumulated power to a level that will be enough for one restart attempt, and only then will it fully charge your battery.

We should also not forget that the car can be started from reverse gear if it is rolling backwards. A similar method can be used for problems with the starter.

Small cars are not large and light enough, so they are quite possible.

If you are unable to find a car that can take you in tow or “give you a light,” then you can try to “push” it on your own.

With the ignition on, you should accelerate to a speed of 2-3 kilometers per hour, and then jump behind the wheel, squeeze the clutch, engage second gear and release the clutch. If the road is smooth and good enough, then this can be done even alone.

This situation can happen not only as a result of battery wear, but also for other, more prosaic reasons. For example, if you forget to turn off the low beam for a long time. So the need to start the engine on your own cannot be ruled out. Sometimes this is the only opportunity to get out of any distant forests or fields where you go.

For successful engine starting “manually” or “coasting” two factors are very important:

Your engine must be in good working order and well tuned;
It (the engine) should start without any additional actions, such as quickly and frequently pressing the gas pedal or holding it half-pressed while the engine is warming up.

If the battery is completely destroyed (for example, there is an internal short circuit or there is no contact), it is impossible to start the car on your own. In order for you to get to the auto store for a new battery, you need to ask someone to “light it.” After that.

Once the car starts, you need to turn on all the electrical consumers in the car (headlights, heater, heated mirrors and windows, cigarette lighter, radio) and head home, trying to keep the speed below average.

Remember that the battery is a very powerful resistance that is included in the vehicle's on-board network. In the absence of a battery, the charging relay and generator operate without load, and therefore can fail very quickly.

Therefore, it is necessary to turn on all devices that consume electricity and not increase the speed.

Source: https://camry-v50.ru/chto-delat-esli-sel-akkumulyator/

Main reasons for lack of charge

The main reasons for the lack of charge on the Toyota Camry battery include:

The most common reason may be that the battery has exhausted its potential resources. This happens after 4 or 5 years of use.
Due to faulty wiring, the generator may not charge the battery during a trip, which will lead to the battery draining quickly.
Perhaps due to problems there is a current leak in the on-board network. This can also be indicated by the charging light coming on.
Rapid battery discharge is possible when you use the headlights or radio with the engine turned off, or forget to turn it off after a trip for a long time.
If you do not prepare the battery for frost, when exposed to it (critically low temperatures), the battery may discharge.

Which battery should I put in a Toyota Camry?

Toyota Camry is a very popular Japanese car, which was a huge success and is still produced by the largest auto giants in the world. They are collected in Japan, USA, Russia, China and Australia. The first model of a reliable Japanese car was presented to the public in 1982. In 2021, we see on the roads the 8th generation, which has been polished to perfection, but still the automaker never ceases to amaze us, offering even more advanced models with improved performance characteristics. You can order the battery using this link.

Battery for Toyota Camry XV40 and XV50

Car enthusiasts periodically face situations when the battery is discharged. If you find that there is no charge in the battery on your Toyota Camry, it needs to either be charged or replaced. In the latter case, you should take a responsible approach to choosing a new battery.

How to choose the right battery

For Toyota Camry, Asian standard batteries are used; batteries of the following brands are mainly used: Japanese Panasonic, Yuasa, FB, Varta, including the Korean Rocket. A battery from the Turkish manufacturer Mutlu is also suitable. In some cases, it is possible to install batteries from European manufacturers.

Batteries for Camry come in two different sizes: 261x175x223 mm and 230x175x223 mm for 70 Ah and 60 Ah. The drive is located in the engine compartment at the level of the left headlight. It is worth paying attention to the fact that the car battery on Toyota has a positive polarity (reverse).

You should also choose batteries that were recently manufactured, because even when not in use, the charge weakens. You should not take a battery with a capacity less than the standard one, it is better to install one with a larger one, also with inrush current ratings.

A good car battery comes with a long warranty, from 3 to 5 years, which speaks volumes about its quality. You should not choose a battery with a shorter warranty period.

What kind of battery is on the Camry XV40

The new Toyota v40 that left the factory has a standard battery from the Japanese manufacturer Panasonic 80D 26L MF.

The standard battery for a Camry 40 with an engine capacity of 2.4 liters has the following indicators: battery capacity – 65Ah, 12V, starting current – 600A, dimensions – 260/173/220.

Recommended batteries for Camry 40 with an engine capacity of 3.5 liters should have the following characteristics and dimensions: capacity - 75Ah, starting current - 650A, dimensions - 261x175x220.

When batteries with smaller battery characteristics are installed in a car, the load on the engine increases. Batteries that are not suitable for the vehicle will shorten its service life.

Akb on xv50

The Toyota Camry v50 with a 3.5 liter engine is equipped with a battery with a capacity of 75Ah and a starting current of 630A.

Recommended car batteries for Camry V50 2.0 should have the following characteristics and dimensions: capacity – 70Ah, starting current – 630A, dimensions – 261x175x220.

Drives for Camry V50 2.5 must have the following characteristics and dimensions: capacity – 75Ah, starting current – 700A, dimensions – 260x175x220.

Pay attention to the following battery parameters:

The voltage should be standard and should be 12 volts. Please check this rating before purchasing, the seller can test it with a load fork.
The battery capacity must be no lower than that of the factory battery. For v50 the capacity should not be lower than 75Ah.
The starting current must also meet the requirements of this model. Camry requires a battery with at least 600A starting current.

Choose a car battery based on the battery parameters that are optimal for your car model.

Energy storage devices with lower performance ratings will reduce the life of your vehicle. And if the characteristics are too high, then it will not only be more expensive, but may also negatively affect the performance of your car.

The most suitable battery for Camry v50 is Totachi 80D26L.

My car has a Tenax battery, what kind do you have?

If this and other recommended batteries are not on sale, select a battery with the seller, based on the nominal parameters required for your car.

Features of battery operation

For a long service life of a car battery, it is necessary to constantly check its condition, recharge it in time and restore the volume of distilled water. As you recharge the battery, you should periodically monitor the charge current; its value should not be higher than the required value, otherwise the active mass of the plates will collapse.

Pulse battery charger

Before the onset of cold weather and frost, it is necessary to charge the battery for 12 hours to prepare it for critical factors.

The most dangerous factor for the energy source is starting the engine at low air temperatures. To reduce damage to your vehicle and its internals, you should:

Before the onset of cold weather, change summer oil to winter oil. High-quality oil will help protect your car from frost.
Check in advance and replace the spark plugs in your Toyota with new ones to prevent problems on a frosty winter morning.
During periods of severe frost, it is better to remove the battery from the car and keep it in a cool place at home.
Recharge the battery for more than 12 hours in anticipation of cold weather, without waiting for the first frost.
Check the condition of the fuses, wiring, alternator and starter. Make sure they don't need replacing.
During frosts, first of all, crank the engine by turning on the starter briefly, and then try to start the engine. Such measures will help lubricate the channels with oil.

Such actions will definitely help to start the engine during frost and maintain the condition of the battery.

If the car battery charging light on a Camry periodically lights up, this may indicate that current is not supplied from the generator to the on-board network and the battery's energy reserve is being consumed.

The calcium battery in a Camry may not be charged properly if there is poor contact in the negative starter wire that goes from the battery to the engine.

Rules for replacing a battery on a Toyota:

When removing and installing the battery, the door locks may spontaneously lock if the car has an alarm system installed. Therefore, never leave the key in the ignition at this time.
When removing the battery, you must first remove the negative terminal.
When removing the battery, all settings are deleted from the on-board computer's memory, so remove it only if necessary.

What to do if the battery is dead?

When the battery runs out of energy, it does not necessarily need to be replaced with a new one. Most often, it can be very easily charged from the mains by removing it from the car. It is also worth checking whether all devices are normal and working properly, and do not consume additional current.

If the problem is in the battery, then it needs to be replaced.

It is important to consider the polarity and size of the battery. Having selected and purchased a new battery, you should replace the old one.

The battery is replaced on a Camry as follows:

First, loosen the terminals; to do this, use a 10mm wrench. Be sure to first remove the negative terminal, and only then the positive one.
After this you need to remove the clamping bar.
Then the old battery is removed and a new one is installed.
After this, the bar is secured.
When installing, first connect the positive terminal, then the negative one.
Finally, you need to tighten the contacts.

Lead-acid battery design

When replacing the battery, the automatic control unit remains without power and the saved values and parameters are reset. Later, the new data will be stored in memory, and the car will operate as before.

But before this, error signals may be issued. Sometimes the radio is blocked, in which case you will need to enter an activation key to resume its operation.

Main reasons for lack of charge

The main reasons for the lack of charge on the Toyota Camry battery include:

The most common reason may be that the battery has exhausted its potential resources. This happens after 4 or 5 years of use.
Due to faulty wiring, the generator may not charge the battery during a trip, which will lead to the battery draining quickly.
Perhaps due to problems there is a current leak in the on-board network. This can also be indicated by the charging light coming on.
Rapid battery discharge is possible when you use the headlights or radio with the engine turned off, or forget to turn it off after a trip for a long time.
If you do not prepare the battery for frost, when exposed to it (critically low temperatures), the battery may discharge.

Top 2. Bosch S5 005

Rating (2021): 4.63

25 reviews from resources taken into account: Yandex.Market, Otzovik

The best characteristics for urban use The technologies used in the Bosch S5 005 battery provide resistance to discharge and rapid recovery of capacity during short trips, which makes the battery the best choice for urban use.

Characteristics
Average price: 7810 rub.
Country: Germany
Starting current, A: 610
Capacity, Ah: 63
Weight, kg: 15.64

Car batteries from Bosch do not lose popularity, they are distinguished by high-quality assembly and do not let owners down during operation. Model S5 005 is optimally suited for replacing the original on modern Toyota Camry models. Users who install this power source in their car are quite satisfied with its characteristics and capabilities. For several years, the engine starts at half a turn, you can listen to music loudly without worrying about premature discharge. It does not take much time to restore the battery capacity - the battery recovers it perfectly even under extreme operating conditions. Also positive is the durable plastic case and convenient handle for transportation. Among the shortcomings, some owners point out that the terminals are not of the highest quality and do not clamp well.

Advantages and disadvantages

High quality build
Charges quickly

Terminals require attention when connecting