The Toyota Camry 2.4 VII (XV40) model was produced from 2006 to 2009. Table of factory and suitable tire sizes for Toyota Camry 2.4 VII (XV40).

Despite the fact that this information is taken from the websites of auto manufacturers, our catalog is for informational purposes only and does not guarantee full compliance of the proposed sizes with your car.

The standard tire size for Camry 40 does not depend on the modification and engine power. The Russian market offers cars with aluminum alloy wheels with a diameter of 16 inches and tires size 215/60. The design of the wheel arches allows the installation of larger wheels and a reduced tire profile height.

Alloy wheel sizes for Camry 40

When selecting cast or stamped elements for the Camry V40, it is necessary to take into account the location of the mounting studs on the hubs (bolt pattern). The machines use 5 studs, symmetrically located on a circle with a diameter of 114.3 mm. To fix the wheel, closed M12x1.5 mm nuts with a conical part are used to ensure the centering of the parts.

Standard devices

Factory 16-inch parts are high-pressure die-cast from high-impact aluminum alloy. The mounting holes are machined, the surface of the element is covered with a layer of glossy varnish that prevents metal oxidation. The part has 7 symmetrical spokes, the rotation of which ensures cooling of the brake mechanisms and removal of wear products.

The central hole is covered with a decorative plastic cap with the Toyota plant emblem.

Non-standard dimensions

Parts with non-standard dimensions may be used on vehicles:

Wheel sizes and required tire pressure for Toyota Camry

In winter, a reduction of 7 kPa (1 psi) for every 7 °C (12 °F) decrease in temperature is allowed.

How to choose the right wheels and tires

Basic selection rules:

1. The external dimensions of the wheel rim and the mounting size of the tire must be the same.
2. The location of the mounting holes must match the position of the studs on the vehicle's hub. It is prohibited to re-drill holes in an aluminum element offset relative to the standard channels, since the mechanical strength of the parts is reduced.
3. If the diameter of the central channel is larger than the element on the hub, then it is necessary to select a centering ring, which is made of plastic or metal. If the adapter sleeve is installed correctly, the running characteristics do not change. If vibration is felt when moving, you should check the correct selection and installation of the ring.
4. When selecting a disk, it is necessary to take into account the maximum static load, which is not indicated in the marking. Information is available in the product passport or on the manufacturer’s website. Factory products are designed for a load of 690 kg; the use of parts with a reduced rating is prohibited. If this requirement is violated, the cast element may be destroyed when driving on an uneven road.
5. When selecting custom parts, the X-factor should be taken into account when the element clings to the brake caliper or suspension. The factor depends on the design features of the disk and production technology. For example, there may be amplifiers on the spokes that do not interfere with installing the product on the hub, but will cling to the brake caliper when rotating.
6. The standard tire size on a Toyota Camry is 215/60R16; the design of the suspension and wheel arch is not designed for the use of tires with a tread width of more than 225 mm. When installing non-standard wheels, 215/55 R17, 225/45 R18 or 225/40 R19 tires are used. Reducing the profile height allows you to maintain the outer diameter and ensures the correct operation of the speedometer (measurement is carried out by an electronic sensor based on the number of revolutions of the secondary shaft in the gearbox).

Choosing tires for wheels

If the car has just come out of the showroom, the owner will invariably have to puzzle over the selection of winter tires, especially if it is winter outside, and the factory tires are summer.

Let's try to figure out what the best winter tires are for the Toyota Camry, taking into account the base size 215/55 R17.

Here is the TOP 20 - popular offers from average Russian stores:

Which winter tires for Toyota Camry to choose – studded or friction, depend on the climatic conditions of your region and the quality of the roads on which you will have to drive.

This is not an SUV, but if, in order to get from home to work, you need to overcome uphill and downhill terrain every day, and even with heavy snowfall, Velcro is not the best choice.

We also advise inexperienced drivers to ride on studded tires in winter, and it is better if they have a symmetrical, non-directional tread.

If we take into account the test drives carried out annually by the magazine “Behind the Wheel”, Continental invariably leads among friction tires, and Nokian among studded tires. During testing, the following indicators are taken into account:

• braking on dry and wet asphalt;
• acceleration, braking and handling on ice;
• in the snow, in addition to all this discipline, cross-country ability is also added.

In all situations, qualities such as smooth running and acoustic comfort are also assessed.

General recommendations when selecting tires

When deciding which tires to install on a Toyota Camry, you need to take into account the characteristics of a particular modification. In principle, this is a fast car, since the engine power on some of them reaches 249 hp, and accordingly, it can reach speeds of up to 220 km/h.

But engine power alone is not enough for this - the driving performance of the car largely depends on the correctly selected “shoes”.

In winter on ice, and even with all the known quality of our roads, it would hardly occur to anyone to drive at such speeds. High-speed tires are often chosen for the summer, and we will bring to your attention several worthy models.

In the summer, car owners try to install wheels with a larger radius. The maximum tire size for the Camry is 235/40 R19, which is what we will focus on.

Michelin

In general, Michelin rubber is famous for its softness. However, any property in different conditions can be both an advantage and a disadvantage.

Michelin Pilot Sport Cup 2

On high-quality road surfaces, such tires allow you to achieve the highest speeds, but in Russian realities you can feel every bump on them. If you live in the city and drive exclusively on the highway, the Michelin Pilot Sport Cup 2 is an excellent choice.

Nokian

In general, Nokian Tires released three summer tire models in 2021. One of them is Hakka Black 2, designed for sports cars and premium cars. Despite the fact that tires under this brand are now produced in Russia, tread patterns and rubber compounds are created in their homeland in Finland.

Nokian Hakka Black 2

And the Finns have all tires, even summer ones, positioned as models for use in difficult climatic conditions. For Russia - the best!

In the process of creating the model, a concept (Dynamic Grip) was applied, in which the main emphasis is on a new rubber compound, multi-layer structure and improved pattern. In particular, the Hakka Black 2 has stronger shoulder areas and a reinforced center rib.

Smooth and deep longitudinal grooves effectively drain water and thereby improve handling on wet road surfaces.

Continental

Tires under the Continental brand are now produced in Russia, but only in sizes up to radius 17. Everything above is manufactured either in Germany itself or at its subsidiaries in Europe.

Continental ContiPremiumContact 6

The latest summer model, PremiumContact 6, is a premium tire with an asymmetric tread pattern designed for mid-range cars and SUVs. IN

It came out in 2021, has already “worked” for two summer seasons and has managed to earn a high reputation among owners of cars in this category. The main advantages are excellent handling combined with a high level of acoustic comfort.

Toyo

Toyo Proxes STIII is a tire with a fundamentally different type of tread than those presented above. Its feature is a directional symmetrical pattern. Is it good or bad?

Toyo Proxes STIII

This type of tread, which is quite deep and can be considered all-season, is designed to drain water as efficiently as possible.

The directionality of the pattern ensures directional stability at high speed. The shoulder areas are reinforced, the rubber on them is more rigid and multi-layered. This gives the tread resistance to high loads that occur when driving at high speeds.

On such a tire you can drive not only on the highway, but also feel comfortable on a country road.

The best manufacturers

Some of the best summer tire brands suitable for the Camry V40 include:

For winter operation of the Camry V40, non-studded or studded tires with dimensions 215/60 R16 are used.

Winter tires are made of a special material designed for reduced driving speeds. For example, the product Dunlop Winter Maxx WM01 215/60 R16 99T (without studs) can withstand speeds of up to 190 km/h. Its load capacity is 775 kg.

Tires are one of the important elements of a car, on which road safety directly depends. The correct choice of tires ensures handling, directional stability, a comfortable ride and affects fuel consumption.

All tires have a certain specification - each type differs in its purpose, having its own characteristics of the tread pattern, design features and chemical composition of the rubber.

When choosing, take into account the properties of the tire for operating conditions: seasonality, dimensions and standard sizes in accordance with the vehicle parameters, load (maximum weight), speed and range of road quality. The basic rule of an experienced motorist when installing new tires: for each wheel - one size, one design, one model and manufacturer.

Camry V30

This is interesting: Tuning Nissan Almera g15: interior, engine, body

Tire classification: types and sizes

The design of any tire is determined by the indicators of its main parts: carcass, breaker layers, cord, tread and side part. Based on the location of the cord thread that tightens the frame, tires can be radial or diagonal. Diagonal - angular placement of the thread in relation to the surface of the tire, radial - the thread is laid along the entire radius: they are characterized by a large size of the adhesion spot with asphalt, increased mileage and stable behavior on the road.

Tire components:

• The frame carries the main power load and consists of a mesh of cord threads of different sizes and materials, pressed into rubber and fixed to the bead ring. The materials of the cord threads can be synthetic, natural or steel (metal cord).
• Breaker layers create a shock-absorbing effect when the car moves; these are the internal elements of the cord under the tread.
• The tread has a special relief pattern, which ensures the type of adhesion between the tire and asphalt (soft or hard) and the drainage of road surface water at the site of the adhesion spot.
• The bead part holds the tire on the rim of the disc and is made of a hard rubber compound that protects the frame from impacts.

Radial tires can withstand heavy loads thanks to the design of breaker layers of increased rigidity and reduced cord; they are designed for high-speed driving, providing minimal heat transfer and deformation of the tread pattern while driving. Diagonal - often used off-road or as all-season tires when operating in a temperate climate with a constant average temperature.

Best offer from

Lending terms:

• Loan term: 2–36 months
• Credit limit: from 10,000 rub. up to 300,000 rub.
• Interest rate - determined by the bank based on your data and credit history

How to place an order on credit?

Wheel rim parameters, decoding of car rim markings

To place an order on credit, just follow a few simple steps:

1. Decide on the product and place an order on the website or through a call center operator
2. After placing your order, the bank manager will contact you, advise you on the terms of the loan and agree on a meeting with you to sign the agreement
3. Meet at a convenient time for you with a bank representative and sign an agreement
4. After signing the agreement, you must wait for the bank to pay us for your order. Transferring money takes from 2 to 3 business days. As soon as the money from the bank arrives, we will send you an SMS with an offer to pick up your order.
5. Come to our center with your passport and loan agreement to receive your order.

Terms of loan

• Citizenship of the Russian Federation with permanent registration
• Age from 18 years
• Purchase amount from 10,000 to 300,000 rubles
• Required documents: Russian passport, SNILS

For questions regarding registration and provision of a loan, please contact our partner - the HappyLend group of companies: White Camry 40 on huge wheels

Factory casting parameters: Central hole diameter – DIA: 60.1 mm, fastening to the hub – nut, bolt pattern 5×114.3mm, M12 x 1.5 thread

• 16 – 6.5Jx16 ET45
• 17 – 7Jx17 ET45
• 18 – 7.5×18 ET45

Let us explain with help what these letters and numbers mean. The first number is indicated for better understanding. The first number after the dash (6.5, 7, 7.5) is the width, measured in inches; to convert to centimeters, multiply this number by 2.54.

J

– informs the design properties of the wheel (disc flange type), is not important for buyers.

X

– indicates that the disk is not separate.

16

– landing diameter, corresponds to the diameter of the tire.

ET45

– wheel offset, in the presented case, is positive and equal to 45mm.

An important parameter is DIA

(the diameter of the central hole in the Camry 50 is 60.1 mm), which must correspond to the seat of the wheel hub, is measured in millimeters. If the DIA is larger than the hub, then use centering seat rings made by disc manufacturers.

• 205/65 R16 94S
• 215/60 R17 93V
• 225/45 R18 91V

White XV50 with great rims

Let's tell you what these numbers mean. The first three-digit number before the slash is the width of the tire profile, measured in millimeters. The two-digit number after the slash is the ratio of the height of the rubber profile to the width, indicated as a percentage. If the profile width is 215 and the profile height is 60, then 215x0.65 = 129 mm the height of the tire profile. The Latin letter R (Radial) means that the tire is of radial type (the radial type of automobile rubber has replaced the archaic diagonal). The two-digit number after R provides information about the tire diameter (rim diameter) and is measured in inches.

The last two-digit number is the tire load index, i.e. what load the tire can withstand within the speed index at the correct pressure. For Toyota tires, the load index is 93 and 94, these numbers indicate that each can withstand 650 and 670 kg, respectively. The last Latin letter is the speed index, the speed limit within which the use of tires is permissible. In the case of Camry, the speed index is indicated by letters from S to V. S – 180 km/h, V – 240 km/h.

This is the date of manufacture of the tires.

Purpose of tires by type of operation

• Road summer tires - for highways at above-zero air temperatures. It has a harder rubber composition with lower thermal conductivity.
• Winter tires are designed for driving on snowy and icy road surfaces in winter. They are softer and can change the degree of hardness depending on changing temperatures. Most winter tires have studs installed.

• All-season tires allow you to use your car at any time of the year. However, when choosing it, you should take into account that all characteristics will be averaged, and in Scandinavian countries its use in winter is strictly limited.
• Universal tires have a set of properties that allow them to be used simultaneously on road, unpaved and off-road surfaces.
• All-terrain tires are intended only for soft ground and off-road use. When driving on the highway, it wears out quickly, gives low stability at speed and increased noise effect.

In the Russian climate, when using a car year-round, two sets of tires are chosen: winter and summer.

It should be understood that a high indicator of certain performance properties is always achieved at the expense of reducing the indicators of others: for example, if a tire has a declared increased mileage, then stability and controllability will be reduced, or the permitted maximum load in the characteristics of the rubber will mean greater fuel consumption and noise.

The best summer tires for Toyota Camry

Toyota Camry allows you to reach speeds of up to 210 km/h. Accordingly, the car requires tires that provide safety and maneuverability during dynamic, sporty driving. The review includes the 3 best Camry tire models.

Continental PremiumContact 6

Description of the tire. Premium model. The pattern is asymmetrical. Tires are used for middle class passenger cars.

Their peculiarity is characteristics that combine sports and speed capabilities and at the same time provide comfortable movement.

Rubber has increased adhesion to asphalt, which contributes to safety. PremiumContact 6 is included in the highest category “A” in this parameter.

Silicon dioxide added to the compound promotes better adhesion to wet asphalt, reduced rolling resistance and improved wear resistance.

The shoulder blocks are elongated and are designed to easily carry high loads during sharp maneuvering.

The tires are road tires; it’s better not to wear them on mud. The tire sidewalls are soft and absorb shocks well.

Pros of Continental PremiumContact 6

1. Economical.
2. Fast braking.
3. Wear-resistant.
4. Provide high comfort.
5. Soft.
6. Very quiet.

Cons of the Continental PremiumContact 6

1. They slip in the mud.

Tires for those who love dynamic driving, but want to maintain comfort.

Pirelli Cinturato P1 Verde

Description of the tire. Asymmetrical tires for family trips. If possible, highway vehicles are classified as “green”, helping to reduce fuel consumption.

The sidewall is reinforced. This eliminates sagging during sharp turns. With a flat tire, you can drive to the tire shop, although you will have to reduce your speed.

The compound contains natural rubber. To increase wear resistance and rigidity, black soot is added to it.

Adhesion is improved by the addition of silica and nanocomposites. Silicon dioxide also reduces rolling resistance.

The tread pattern is wavy, directed towards each other on both sides. The furrows have different widths.

This solution distributes pressure evenly and ensures silence. The blocks are at different heights. This is also done to eliminate acoustic resonance.

To collect water, there are 3 capacious channels that squeeze out moisture from the contact patch, which makes it possible to maintain traction even on a road filled with puddles.

Pros of Pirelli Cinturato P1 Verde

1. Not loud.
2. High grip.
3. Wear-resistant.
4. Handles well in corners.
5. Reinforced sidewall.
6. Comfortable.

Cons of Pirelli Cinturato P1 Verde

1. Pebbles get stuck in the tread.

Inexpensive tires for lovers of speed and long trips.

Yokohama Bluearth ES32

Description of the tire. Symmetrical tires that allow you to reach significant speeds, but are not designed for aggressive driving.

For a quiet ride without frequent acceleration, it is perfect. These are tires for a family car. Their element is good roads, but you can drive on a dirt road and overcome a little mud, so you can also go to the dacha for a picnic on them.

The central rib is responsible for stability at speed, on the sides of which there are longitudinal channels with jagged edges.

The channels remove water effectively. The edges serve to improve traction on uneven roads. They are helped by notches of external channels.

The blocks of the shoulder part are powerful, their task is to ensure turning without sagging. Braking is short, both on dry and wet roads.

The compound contains silica, which reduces rolling resistance. The sides of the tire are strong, but elastic, absorbing shocks and providing ride comfort.

Pros of Yokohama Bluearth ES32

1. Durable.
2. High stability.
3. Good handling.
4. Quiet.
5. Soft.
6. Wear-resistant.
7. Economical.
8. Inexpensive.

Cons of Yokohama Bluearth ES32

1. Not detected.

Tires for people with a relaxed driving style.

Features of tire size markings

All markings of automobile rubber are standardized in accordance with European regulations - a tire from any manufacturer, its properties, purpose and characteristics can be “read” in the symbols on its sidewall and in catalogs.

Tire size is determined by the following symbols:

• The capital symbol (d) indicates the mounting diameter of the tire rim, expressed in inches;
• Capital (D) – indicator of the size of the outer diameter of the working tire;
• (s) – the size of the profile width (when selected, it must coincide with the size of the seating width of the rim of the working tire without load);
• (h) – percentage expression of the profile series: ratio of height to width;
• (H) – profile height indicator.

There are three types of tire tread patterns:

• A symmetrical non-directional pattern along the tread surface, running with a double seam in the center - the most common universal type;
• Directional - for improved drainage and reduced noise;
• Asymmetrical implements different tire properties in one, often used in all-season or all-terrain tires.

Full list of marking symbols:

1. Indicator of maximum load weight and pressure (USA standard).
2. Marker for the inside of the tire on rubber with an asymmetrical pattern. In other cases, they designate the outer side (“OUTSIDE”).
3. Numbers of indicator of breaker layers, material of cord threads and type of frame.
4. Manufacturer's trademark.
5. Profile width indicator.
6. Percentage series ratio of the height and width of the profile.
7. Size designation (radial type).
8. Tubeless tire.
9. Rim seat diameter.
10. Maximum load capacity (expressed in index).
11. Speed ​​indicator (expressed in an index).
12. An indicator of the direction in the direction of travel of a tire with a directional type of pattern.
13. Date of issue.
14. Compliance with international safety certificates.
15. Tire model.

Additional symbols on tires can indicate the characteristics of the cord (“steel”) - steel cord, versatility (“R+W”), a factory-recovered tire (“retread”) or the marking of a tubed or tubeless tire, respectively (“TT”; “ TL").

Setting: how to set Camry tire pressures

The Tire Low Inflation Warning system alerts the driver to a problem. After receiving emergency information, the owner must verify the real existence of the malfunction and, if necessary, eliminate it.

In accordance with the instructions, after bringing the current pressure back to normal, the initialization process will begin. For it to be successful, it is necessary to correctly install the machine on an almost flat surface and inflate the slopes to the required volume. Otherwise, the system will not work correctly.

Basic rules for the future:

• measure blood pressure once every 2 weeks (at least a month);
• when taking measurements, use a pressure gauge;
• Perform measurements only on cold tires, and do not adjust them when they are warm;
• reinstall the caps.

This is interesting: Tires for Mitsubishi Lancer 10: tire size, pressure

Tires for Camry 40: top 5 best manufacturers

Dealer centers in Russia supplied Toyota Camry 40 pre-restyling versions with standard tires from the Japanese manufacturer Yokohama. Many experts note their adaptability to the Russian climate, especially since the Camry was equipped with tires made in Japan. Given their mid-price segment, Japanese quality competed with the premium brands of the best manufacturers.

The standard Camry tire size is 40 - 215/60R16 with a speed index V and two types of loads - 94 and 95. Depending on the installed types of loads, the tire pressure value is 2 and 2.2, respectively (permissible 2 in winter for engines in the body 2.4 liters). Acceptable replacement options for a larger radius reduce the load value to 93, but improve driving performance and directional stability at high speeds. Without changes in the suspension (raising, increasing ground clearance), the following standard sizes are installed on the Camry 40:

• 215/55R17
• 225/45R18
• 225/40R19

Installing a larger size on a Camry 40 (for example, R20, R22) requires intervention in the design of the vehicle's chassis, and this worsens the overall life of the suspension (levers, shock absorbers and silent blocks).

The ideal balance between controllability, speed and comfort is recommended by the manufacturer itself. In addition, proper tuning requires selection and replacement of disks; their parameters also affect quality and safety. For example, when installing a larger diameter, they usually choose cast rims and low-profile tires - as a result, the suspension will be too stiff, the load on the elements of the standard suspension will double, and its service life will be reduced. A high profile with a non-standard size will absorb all bumps and potholes on the road well, but controllability at high speed will be reduced. It is important to understand: for deep tuning of any car, it is necessary to calculate all the characteristics inherent in the design - from the body and transmission to the engine type.

The optimal tire size for Camry 40 is 215/60R16. The best new products from automobile tire manufacturers that have earned popularity among Camry owners are:

The minimum tire width for the entire range of models is: 125-135 (mm).

• Tire width without load (B): from 125-135 to 345-364;
• Diameter (D): from 487-495 to 952-962;
• Outer circumference (L): from 1541 to 2990;
• Tire profile or height (H): from 58 to 518.

To determine the tire profile height (H), measure the difference between the outer and inner diameter of the tire (the actual profile height) and divide it by the distance between the outer edges of the rubber.

Important: when determining the tire width (B), elevations due to additional belts, letters, contours and upholstery of the tire are not taken into account; in general, this parameter should not exceed the width of the wheel rim by more than 30%.

The best all-season tires for Toyota Camry

It is difficult to use all-season tires all year round on a sedan in our country. But in cities they allow for better safety in the off-season, when thaws can alternate with frosts.

The rating considers 2 models of the best all-season Toyota Camry.

GOODYEAR Vector 4Seasons

Description of the tire. All-season tires with a beautiful tread pattern, symmetrical, directional.

The third generation of this model is currently in production, which began production in 2021.

The tires are distinguished by high traction and excellent driving performance regardless of weather conditions. The tires also show good wear resistance and low rolling resistance.

The pattern of the model contributes to high stability when entering aquaplaning. Thanks to the developed drainage with deep channels, water, snow, and slush are quickly and effectively removed from the contact zone, being thrown to the sides of the tire.

The tread is formed by wide curved blocks with additional slots in the central part. A large number of edges improves traction, especially in winter, when driving on mountain roads and when maneuvering.

Tire deformation on sharp turns is reduced due to the reinforcement of the shoulder blocks. Tires with soft sidewalls. Not suitable for hot weather - the rubber floats.

For cool summers, mild winters and the off-season, this model is excellent.

Pros of GOODYEAR Vector 4Seasons

1. Quiet.
2. Economical.
3. The roll is big.
4. Good grip on dry and wet asphalt.
5. They go well in the snow.
6. Can walk on dirt and dirt.

Cons of GOODYEAR Vector 4Seasons

1. Not for harsh winters.

Continental AllSeasonContact

Description of the tire. Symmetrical all-season tires with a directional pattern. It was designed for the peculiarities of the European climate of the central and western parts.

For us it will be suitable until the first frost of -10°C. But this will allow you not to stand in line at the tire shop, but to arrive when there is practically no one there. Tires are optimized for middle class passenger cars.

Very good grip on asphalt surfaces, including wet and slippery ones. The compound has properties of adaptation to the coating.

Due to silica, the tread rubber has become more elastic and soft at any air temperature, better adhering to uneven surfaces.

Drainage channels have open shoulder areas; they are adapted to quickly drain large masses of water and slush away from the tires.

The tread blocks are rigid with a minimum number of sipes. The tires demonstrate stable handling and sharp braking.

The sides of the tire are soft, but thin. Rolling resistance is low, which reduces fuel consumption.

Pros of Continental AllSeasonContact

1. Soft.
2. Quiet.
3. They are not afraid of ruts.
4. Handling is stable.
5. Excellent grip on asphalt.
6. Good cross-country ability in slush.

Cons of Continental AllSeasonContact

1. Thin sidewall.

Economical all-season tires for use in the city and beyond.

Alloy wheel sizes for Camry 40

When selecting cast or stamped elements for the Camry V40, it is necessary to take into account the location of the mounting studs on the hubs (bolt pattern). The machines use 5 studs, symmetrically located on a circle with a diameter of 114.3 mm. To fix the wheel, closed M12x1.5 mm nuts with a conical part are used to ensure the centering of the parts.

Standard devices

Factory 16-inch parts are high-pressure die-cast from high-impact aluminum alloy. The mounting holes are machined, the surface of the element is covered with a layer of glossy varnish that prevents metal oxidation. The part has 7 symmetrical spokes, the rotation of which ensures cooling of the brake mechanisms and removal of wear products.

The central hole is covered with a decorative plastic cap with the Toyota plant emblem.

Non-standard dimensions

Parts with non-standard dimensions may be used on vehicles:

Wheel bolt pattern Toyota Camry (XV40) 3.5 (277 hp, gasoline) (2008-2011)

razboltovka.ru

How to choose the right wheels and tires

Basic selection rules:

1. The external dimensions of the wheel rim and the mounting size of the tire must be the same.
2. The location of the mounting holes must match the position of the studs on the vehicle's hub. It is prohibited to re-drill holes in an aluminum element offset relative to the standard channels, since the mechanical strength of the parts is reduced.
3. If the diameter of the central channel is larger than the element on the hub, then it is necessary to select a centering ring, which is made of plastic or metal. If the adapter sleeve is installed correctly, the running characteristics do not change. If vibration is felt when moving, you should check the correct selection and installation of the ring.
4. When selecting a disk, it is necessary to take into account the maximum static load, which is not indicated in the marking. Information is available in the product passport or on the manufacturer’s website. Factory products are designed for a load of 690 kg; the use of parts with a reduced rating is prohibited. If this requirement is violated, the cast element may be destroyed when driving on an uneven road.
5. When selecting custom parts, the X-factor should be taken into account when the element clings to the brake caliper or suspension. The factor depends on the design features of the disk and production technology. For example, there may be amplifiers on the spokes that do not interfere with installing the product on the hub, but will cling to the brake caliper when rotating.
6. The standard tire size on a Toyota Camry is 215/60R16; the design of the suspension and wheel arch is not designed for the use of tires with a tread width of more than 225 mm. When installing non-standard wheels, 215/55 R17, 225/45 R18 or 225/40 R19 tires are used. Reducing the profile height allows you to maintain the outer diameter and ensures the correct operation of the speedometer (measurement is carried out by an electronic sensor based on the number of revolutions of the secondary shaft in the gearbox).

A little about the evolution of the car

Considering that the Camry has been produced in one variation or another since 1980, Russian car owners have cars of various modifications on their hands. There are even some that are intended for the domestic Japanese market, but we will only talk about European options.

The chronology of Toyota Camry generations looks like this:

1. Body XV10, 91-96. Initially it was only a sedan under the Scepter brand, a station wagon appeared in ’92, and in ’93 they were renamed Camry.
2. Body XV20, 96-02. It was produced in various body styles, and in different countries the car bore different names. The coupe and convertible were called Solara, sedans with an extended wheelbase were called Avalon. There were other luxury modifications, but the most popular was the Camry family sedan.
3. The XV30 body, which became the fifth generation, was produced from 2001 to 2005. In Russia, options were offered with a five-speed manual transmission and a 2.4-liter engine, and a four-speed automatic transmission and a 3-liter engine.
4. The 2006-2011 model with the XV40 body, which in our country is more often called the Camry 40, was offered for Russia in several modifications of engines and gearboxes, and not only front-wheel drive, but also with all-wheel drive.
5. The XV50 body version began to be produced in 2011. The independent Australian association ANCAP tested this version for security. According to all criteria, the car received five stars. In 2014, restyling was carried out and some shortcomings were eliminated along the way. In particular, the wheel struts were made more durable. There is already an option with a 3.5-liter engine in the model range.
6. The world premiere of the sixth generation, with the XV70 body, took place in Detroit, America in 2021. By 2021, the model reached Russia, where, by the way, it has also been assembled since 2007.

Camry XV 70 – latest generation

The next change of generations had a very beneficial effect on both the functionality of the machine and its appearance. Although this four-door sedan is substantial, it is not bulky at all.

Enlarged wheel arches accommodate 18-inch wheels, although in factory configurations the Camry comes with 16 and 17-inch radii.

Let's get acquainted with the modifications and wheel sizes:

General background information

Ranges of possible values ​​for tires and wheels of Toyota Camry 2011.
Tires

Wheel disks

Photo

Expert advice

When choosing tires for a car, you must first follow the manufacturer's instructions. Ask yourself a few questions.

• On what roads will the car be primarily used?
• Do you need increased cross-country ability?
• How much of the route will be city roads and how much will be highways?
• Will the vehicle carry heavy loads?

The answers to these and similar questions will help determine which tire parameters you need to pay special attention to.

How to choose the right wheels for Toyota Camry 2011?

3 types of rims:

• Stamped (economical price category) - made from a sheet of iron by stamping on a press.
• Light alloy - manufactured by casting (more reliable than stamped ones).
• Forged (the highest quality and more expensive than the previous ones) - made from light alloys by stamping at high temperatures.

The choice depends on financial capabilities. However, it should be borne in mind that the quality of the road surface on which you have to drive every day must also be taken into account.

So, if it gets into a hole, a stamped disk will bend and will not cause harm to the tire, but a forged or cast one can cut it. There is a possibility that the cast disc may burst or crack.

It should also be noted that repairing “stamping” wheels is cheaper than repairing cast or forged wheels. But wheels with high-quality cast and forged disks kill the suspension less, because lighter and have more perfect geometry (better balanced).

The same wheels may or may not rub with tires on the same car - wheel alignment adjustment will help here.

What is the tire pressure?

It is the driver's responsibility to constantly monitor tire pressure. This will avoid standard problems associated with vehicle operation. An abnormal pressure value often causes:

• deterioration of management;
• uneven tread wear.

Often the car owner independently reduces the pressure in the wheels of his own vehicle. This reduces the load on the suspension, and the car “passes” various road irregularities an order of magnitude easier. But it is worth noting: a decrease in pressure even by 0.1 MPa leads to serious problems. The main ones include:

• increased fuel consumption;
• rapid wear of the outer tread segments;
• the car becomes less maneuverable.

An overinflated wheel causes no less problems. The central part of the cylinder begins to wear off quickly. In addition, at ambient temperatures of more than 60 degrees Celsius, the tire may simply explode. Which will lead to driving into the oncoming lane.

Modification – USDM

Tire and wheel sizes for Toyota, Camry, VI (XV30), 2001 – 2006 Tire and wheel sizes for Toyota, Camry, VII (XV40) Facelift, 2009 – 2011 Tire and wheel sizes for Toyota, Aurion, XV40, 2006 – 2009 Size tires and wheels for Toyota, Camry, V (XV20), 1996 – 2001 Tire and wheel sizes for Toyota, Camry Gracia, I (XV20) Restyling, 1999 – 2001 Tire and wheel sizes for Toyota, Aurion, XV40 Facelift, 2009 – 2011

Non-standard disks

If you buy an original casting for a Camry V40, then you should not worry whether it will fit the car, because this is already provided for in advance by the manufacturer, but when buying castings for a V40 car from other manufacturers, you should pay attention to a number of factors:

1. Bolt pattern on the hub: 5X114.3 - this means that the fixation is carried out by five bolts, and the bolts themselves form a circle measuring 114.3 mm.
2. Maximum diameter: R20.
3. The wheel offset should be between 35 and 45 mm.