Corolla, all generations of which were sold in large quantities, has long and firmly acquired an army of admirers. Over the more than half-century history of this sedan, a lot has been written and argued about it.
But everyone who has driven this car will unanimously agree that its secret is simple, and lies in the build quality, excellent performance characteristics and, of course, a pleasant exterior in which there is nothing superfluous.
Let's consider what wheels can be installed on a Toyota Corolla so that the driving performance and appearance of the car will only improve - after all, a lot of things also depend on them.
What is the bolt pattern for Toyota Corolla 150?
Disc drilling parameters are usually called bolt pattern:
| Make model modification Auto | Year of issue | Bolt pattern LZ*PCD |
| Toyota Corolla 1.6 VVT-i X (E150) | 2010 | 5X114.3 |
| Toyota Corolla 1.6 VVT-i X (E150) | 5X114.3 | |
| Toyota Corolla 1.6 VVT-i X (E150) | 2009 | 5X114.3 |
| Toyota Corolla 1.6 VVT-i X (E150) | 5X114.3 |
What is drilling, wheel and tire sizes
Drilling is the distance between wheel bolts. The designation in the car manual is the English abbreviation PCD - Pitch Circle Diameter.
For example, for a Toyota Vista, the correct drill size will be 5x114.3, where:
- 5 is the number of holes;
- 114.3 – diameter.
These values are needed by those who are planning to change regular tires to non-standard ones in order to buy or do the correct drilling themselves. This takes into account the tire size and wheel size.
The tire size consists of the following values:
- width;
- heights;
- diameter, which is designated by a capital letter R.
Width and height are written as a fraction, with the width value coming first, followed by the diameter. An incorrectly selected size leads to poor traction between the wheel and the road surface.
The disk size parameters are width and diameter. Usually they are the only ones indicated in the car manual. For example, 5.5 J x 14.
- 5.5 J is the seat width of the disk, where J is information about the rim flanges;
- 14 – diameter. It will be equal to the diameter of the tire.
Wheel sizes are required when purchasing a tire. Now young car enthusiasts are installing wide tires instead of regular ones. The main thing here is not to overdo it. For example, for a 5.5 J fit, a tire width of 200 will be critical.
Let's look at the drilling pattern, tire and wheel sizes of famous Toyota car models.
How to spot a fake
Despite the high quality, as well as production control, sometimes you can find negative reviews about Advics pads on the Internet. The most common reason for this is the use of counterfeit products. This is quite easy to find in stores.
And it’s also easy to distinguish it from the original
When purchasing, you need to pay attention to the following:
- packaging quality;
- presence of instructions inside in English and Russian - well printed;
- lack of polyethylene on the pads themselves.
None Inside there must be instructions in Russian and English. Moreover, if the font is difficult to read, then again it is most likely a fake. Real pads made in Japan are never sealed in cellophane.
Toyota Corolla Verso R10 configurations
Toyota Corolla Verso 2007 is available in two trim levels: Sol and Terra. Terra is the minimum required set of car functions, Sol is an expanded one.
The basic configuration of the Corolla Verso has everything necessary for comfortable travel for a large family: air conditioning, heated driver and front passenger seats, and an audio system. Safe trips are made by the presence of an ABS system and brake force distribution, high-quality airbags, and disc brakes. The Terra package also includes wheels of the appropriate type and size, heated side mirrors, steering column adjustment, and a remote central locking control system. An anti-theft system will protect your car from theft.
Corolla Verso interior layout
The Sol package for the Corolla Verso is complemented by functions that make it easier to drive the car in difficult conditions: vehicle stability control system, traction control system, electronic brake booster. In the Sol configuration, travel is more comfortable due to the presence of climate control and cruise control, an armrest for the front seats, and a leather steering wheel. Driving a Toyota Verso in the Sol configuration is more pleasant, thanks to the presence of fog lights, an electrochromic rear view mirror, a rain sensor, and alloy wheels.
How to identify your consumer
At the very beginning, you should decide on two main questions: what is being sold and to whom.
What – product, service or complex. It is not recommended to immediately take the plunge and withdraw 500 SKUs. It is much safer to start with a small but well-balanced product portfolio.
After all, a new market and new products are something that the consumer has never tried. The buyer needs to recognize the need, get used to it, get acquainted with the brand and have the first customer experience.
For business, this is the time of the first wave of collecting feedback from consumers about the brand and products, because the first impression cannot be made twice. It is recommended to start with the must-have assortment, that is, with those SKUs that are 100% necessary in the assortment. For example, the segment of wireless solutions (smart home) can be successfully started with 6 SKUs: two types of smart video cameras, three sensors and a smart socket.
A global example of such a product launch model is Kylie Jenner’s cosmetic empire KYLIE COSMETICS. The enterprising younger sister of the Kardashian-Jenner clan began to instill love for her brand with one product - a matte lipstick + pencil set, which became a bestseller. Later, the brand’s product portfolio included eyeliners, eye shadows, blushes, powders and much more. In 2021, Kylie is the youngest member of the Forbes list among highly paid stars under 30 years old with an annual income of $41 million.
Today, customers are the main asset of a business. An important and responsible stage is the precise determination of the target audience (TA) of the brand and its characteristics. A mistake here, as at the positioning stage, is almost fatal.
You should not skimp on choosing a quality agency that will do a detailed study of your target audience. It is necessary to clearly and in detail segment the audience, identify the core, determine what needs and “pains” each segment has, what is the motivation for consumption, what values will the client receive if he uses the product.
The Russian market, especially FMCG, presents one big failure in defining the target audience. The famous brand sells candies in the middle price segment and sales are not going well. The product manager improved the quality of the packaging and increased the price, thus reorienting the product to a different target audience, and sales increased. At the same time, the consumer properties of the sweets have not changed. There is no need to be afraid to put forward theories and test them; on the contrary, you should “dig” the audience.
It is important to understand the geography of future sales, because the product values for consumers in Kaliningrad and Tatarstan may be completely different, and this will require adjustments in the communication strategy depending on the sales region. Therefore, the target audience must be developed taking into account the future geography of the brand’s presence
Quantitative and qualitative research indicators will provide the basis for planning purchase and sales volumes, geography of sales offices, and development of a marketing strategy
Therefore, the target audience must be worked out taking into account the future geography of the brand’s presence. Quantitative and qualitative research indicators will provide the basis for planning purchase and sales volumes, geography of sales offices, and development of a marketing strategy.
The importance of following factory recommendations
With a slight deviation of the landing dimensions, the difference in the bolt pattern of the Toyota Corolla wheels is not determined visually. But in this situation, after tightening one bolt, other fasteners move. An imbalance initially provokes a slight beating, causing discomfort. Subsequently, components of the steering, suspension, and braking system are destroyed. Such impacts create emergency situations and reduce the life of valuable components and assemblies.
If the DIA is smaller than the standard diameter, the disc will not fit on the protruding part of the hub. If the hole is too large, similar obstacles will not arise during the installation process. However, you will have to install an additional ring for accurate alignment.
Moving the offset towards the widening (narrowing) of the track:
- worsens handling when cornering;
- accelerates bearing wear;
- creates additional load on the suspension;
- increases the risk of tires contacting body parts.
In the same way, the tires are checked for compliance with the manufacturer’s recommendations.
Options
Product parameters
Particular attention should be paid to the size of the product. After all, wheel rims in the following dimensions are mounted on the Toyota Corolla 2007 model year. Some cars that are equipped with a 1.4 liter engine have the following parameters: stamped steel wheels with dimensions 6JxR15 5x114.3x60.1 ET39, where 6JxR15. 6J - rim width, R15 - diameter in inches, 5x114.3 - drilling, 3. 60.1 - inner hole diameter, ET39 - offset.
On a note.
These include cast or stamped products, the dimensions of which are: 6.5JxR16, 5x114.3, 60.1, ET45, where:
- 6.5JxR16. 6.5J - rim width. R16 - disk diameter in inches;
- 5×114.3 - drilling;
- 60.1 - diameter of the internal hole;
- ET45 - departure.
The permissible deviations presented below are also highlighted.
Departure
It amounts to ET42. Only for cast and forged wheels.
Note!
The central hole of 60.1 mm may differ from the standard one in a larger direction. In this case, the installation of plastic centering rings is required to compensate for the difference in size.
Fasteners
When switching from standard stamped wheels to cast or forged ones, you must purchase special mounting nuts from the wheel dealer.
Rubber and its dimensions
The following tire sizes are installed on the Toyota Corolla 2007 model year:
- For cars equipped with a 1.4 l engine - 195/65/15;
- For cars with a 1.6 l engine - 205/55/1.
Features of choosing products according to standard sizes and recommendations of the concern
- If you need to change wheels at a minimum cost, you should buy “stamping”. This is a cheap option. The only drawback is its outdated design.
- Die-cast models look much more beautiful, but the cost of these products is high. They are distinguished by a variety of designs.
- A steel product can be repaired; if damaged, a light alloy product cannot be restored.
When installing original wheels on a Toyota Corolla 150 body, you must choose factory components, since counterfeit products will not last for a long time.
When developing original designs, the manufacturer completely changed the operation of the wheel system, adding the latest elements. Accordingly, the factory original will serve the car owner much longer.
Many people wonder what to do if there are no original components for sale from the famous Toyota Corolla brand. In this situation, analogues should be selected. Initially, the car owner must determine what type of disc needs to be installed and whether a bolt pattern is necessary.
This indicator is the diameter of the hole that holds the bolts. When choosing a product, the buyer must pay attention to each parameter. In this case, if the bolt pattern of the structure does not suit the modification of a certain brand, then it will not be installed according to the axial principle.
The appearance of the vehicle does not change. In this option, only the safety characteristics change for the worse. If you install the discs in a non-axial manner, this will negatively affect the suspension and steering system of the car.
This parameter can be measured in different ways. As a rule, basic information on wheel bolt patterns for various brands, including models, contains the necessary information. Sometimes you need to calculate the bolt pattern yourself.
Elements that have 3 holes are 1.155, 4 holes are 1.414, with 5 bolts 1.701. Sometimes a caliper is used to calculate this indicator.
Models of alloy wheels WSP Italy for Toyota cars
The predecessor company to Toyota Motor Corporation arose when the Toyoda Automatic Loom Works, a loom manufacturer, established an automobile division in 1933.
The first engine was assembled literally immediately, followed by the first A1 passenger car and the G1 truck in 1935.
To an independent company, Toyota Motor Co., Ltd. the company separated in 1937.
After the war in 1947, mass production of passenger cars of the SA model began.
10 years later, Toyota Crown begins exporting to America (the first Japanese car in the USA).
In the 70s, new factories were built, developments were carried out and technical improvements were introduced, thanks to which budget models became more and more “advanced”. Celica, Sprinter, Carina, Tercel, Mark II models are entering the market.
In 1982, Toyota Motor Corporation was formed and production of the Toyota Camry began. In the 80s, Toyota established itself as the largest Japanese auto manufacturer, ranking third in terms of production volumes in the world.
2007 was a landmark year for Toyota Motor - for the first time the company produced and sold more cars than the auto giant General Motors. In 2012, Toyota managed to repeat its success, overtaking Volkswagen and General Motors.
The secret of Toyota's success was the company's own development - the Toyota Production System, which allowed the brand to produce excellent cars at an affordable price, setting new quality standards.
Now other manufacturers are trying to organize something similar in view of the results that Toyota has achieved: the brand has more than once received the title of “The most expensive automobile brand in the world” in several ratings at once.
Even the owner of a car of the “most expensive brand” does not want to overpay in vain, and WSP Italy provides such an opportunity - replica Toyota wheels satisfy all customer requests for quality at an affordable price! Replica Toyota alloy wheels are suitable for Toyota Auris, Avensis, Aygo, Camry, Carina, Celica, Chaser, Corolla, Land Cruiser, MR 2, Paseo, Picnic, Previa, Prius, RAV 4, Starlet, Supra, Tercel, Yaris, 4 Runner , Hilux and their modifications.
Technical characteristics of 2nd generation
The dimensions of the 2nd generation Toyota Corolla Verso are almost the same for the 2003 and 2007 models. And equal to 4360 mm in length, 1770 mm in width; in 2003, the height of the Corolla Verso was 1620 mm, and in 2007 it increased to 1660 mm. The weight of the car depends on the configuration and varies from 1355 to 1435 kg.
Bright instrument panel. For girls?
The ground clearance of the second generation Toyota Verso is about 153 mm. Be careful, a loaded car loses at least 2 centimeters in ground clearance. The wheelbase is 2750 mm. The trunk volume in the Corolla is 423 liters; it can be increased by folding down one or two rows of passenger seats.
The volume of the Toyota Verso fuel tank is 60 liters. for model R10 and 70 l. for E121. Toyota Verso fuel consumption ranges from 7.5 to 9.9 liters per 100 km.
Engine and transmission
Toyota corolla verso 2007 and 2003 is equipped with a 1.8 liter 1ZZ-FE engine with a power of 129 horsepower. Toyota Verso was produced with two types of transmissions: Manual 5 or Robot. The robot is a middle option between automatic and manual, but in reality this type of transmission has more disadvantages than advantages.
The motor has a torque of 170 N*m.
