What pressure should be in Toyota Land Cruiser tires?

A comfortable car ride is only possible if the tires are inflated to the correct pressure. For each model and wheel size, the optimal performance is different. The recommended tire pressure for Toyota Land Cruiser varies, depending on the modification, the diameter of the slopes and the load, from 2 to 2.6 bar. The choice of the correct inflation in practice depends on the quality of the road, the time of year and personal riding sensations. Experienced car owners recommend adjusting the indicators to suit themselves, but within no more than 0.2 atmospheres in any direction. It is important to take into account the climate - when the temperature changes towards colder temperatures, pumping may be necessary. Measure the pressure on cold tires, an hour or more after stopping the engine.

Tire pressure Cruiser 80, 100, 105

The recommended inflation of Kruzak wheels of early modifications is lower than that of later modifications. The wheel diameter is also smaller. So the Cruiser 80 is supposed to install 15 and 16-inch ramps with a pressure of 1.8 bar for the front and 2 for the rear. The hundredth Kruzak now has a radius of 17, which means the desired pumping in the leading slopes has increased to 2, and in the rear to 2.2 atmospheres.

In the 105 model, no changes were observed in comparison with its predecessor. Recommendations on optimal boost of slopes are equally suitable for summer and winter tires.

Tires and wheels Prado 120

Prado 120 wheels

Suitable tires for Prado 120 - corresponding wheels and their sizes.

• 225/70R17 108S – 6Jx17 ET50 ,
• 245/70R17 ( 110H or 110S ) – 6.5Jx17 with offset 15 ,
• 265/65R17 – 7.5JJx17 ET30 ,
• 265/65R17 ( 110H or 112S ) – 7.5Jx17 offset 10-30 ,
• 265/60R18 ( 109H or 110H ), 285/60R18 116V – for 7.5Jx18 with offset 25 ,
• 265/60R18 114S – 7Jx18 ET30 ,
• 285/50R20 112V – 8.5Jx20 with an offset of 25 .

Land Cruiser Prado 120: XD-Series Black R20 wheels, Cooper tires 275/50/R20

Normal tire pressure is 2.2 - 2.3 bar . The permissible wheel size for Prado 120 is 17-20 inches . Bolt pattern (PCD) – 6×139.7 , ⌀ central hole – 106.1 mm , thread – M12 x 1.5 millimeters.

Tire pressure Cruiser 200 R18 and R20

It is recommended to pump up to 2.3-2.4 bar. Domestic car enthusiasts choose the largest of the permissible values. On wheels with a diameter of R20, the pressure depends on the speed at which the car is most often used: if it is below 160 km/h, then 2.4 for the main and rear slopes will be enough. If it exceeds this figure, then the inflation in the rear tires must be increased to 2.6 atmospheres.

The recommendations are the same for diesel and gasoline versions. Valid in winter and summer. When the air temperature drops, its compression in the slopes also drops, so in cold weather it is worth pumping them up.

Why check

The pressure in the Land Cruiser Prado 150 tires needs to be monitored because significant changes lead to accelerated tire wear, decreased handling, and even breakdown of the SUV.

The number of atmospheres in rubber is not a constant value: it changes by tenths of a bar depending on the temperature.

In summer, during the day it rises by 0.1-0.2 bar - the air inside the tire expands, increasing the indicator. In winter, the opposite phenomenon occurs, which is why it is recommended to overinflate the wheels: the increased pressure compensates for the loss.

How to check

It is recommended to check the indicators before each trip, but not all drivers have the time or desire to do this. A visual inspection can replace measurements - by the appearance of the wheel it is clear whether it is low, but it is not so easy to determine by eye whether it is overinflated.

It is imperative to use a pressure gauge, a device for measuring tire pressure on a Toyota Prado 150, at least once a month.

The verification algorithm is as follows:

1. Cool the tires: at least 3 hours should pass from stopping the car.
2. Remove the cap from the nipple and install the pressure gauge.
3. If the value is correct, tighten the cap. If necessary, lower or inflate, closing the nipple afterwards.

Be sure to check all the wheels: the wrong amount of atmosphere in at least one of them can cause an accident.

Consequences

Both too low and too high pressure in the tires of the Prado 120 or any other Toyota model are dangerous. The deviation from the norm specified by the manufacturer should not exceed 0.5 atmospheres.

Flat tires can lead to:

• wear of the tire edges;
• an increase in the temperature of the disk, which can lead to an explosion;
• increased fuel consumption;
• weak grip on the road.

An overinflated tire causes:

• wear of the center of the rubber;
• deterioration of adhesion;
• reduction of depreciation;
• increasing the risk of transmission damage.

The fact that a small increase in the amount of bar in the tire reduces fuel consumption does not compensate for the problems arising from excess atmospheres.

Different pressures pose a particular danger. Because of this, differences arise in the degree of tire wear, road grip, and handling - the behavior of the TLC on such wheels is not predictable.

Table of tire pressure standards

On the Toyota pillar you can find a sticker with optimal tire inflation.

Wheel size Prado 150

Suitable tires for Toyota Prado 150: diameter 17.0 - 20.0 inches , profile width 245 - 285 mm , profile height to width ratio 50 - 70% , pressure 2.2 - 2.4 bar .

Wheels for Prado 150 generation ( 17.0 - 20.0" ): drilling 6×139.7 , central hole diameter: 106.1 mm ; Width: 6.5 – 8.5 inches ; permissible overhang: in the range of 15 – 30 mm .

Land Cruiser Prado 150 with American wheels Pro Comp Metal Mulisha R18 J9 ET0 6Х139.7/135

Here is an acceptable combination of Prado 150 tire sizes and corresponding wheels :

• 245/70R17 ( 110H or 110S ) – 6.5Jx17 with offset 15 ,
• 265/65R17 ( 110H or 112S ) – 7.5Jx17 , offset 10-30 ,
• 265/60R18 ( 109H or 110H ) – 7.5Jx18 (or 7.5JJx18 ) ET25 ,
• 285/60R18 116V – 7.5Jx18 ET25 ,
• 265/55R19 – 7.5Jx19 ET25 ,
• 285/50R20 112V – 8.5Jx20 ET25 ,

Opinion about pressure pumping from other owners

Sergey, 34 years old.

I have owned a Kruzak 200 for three years and use 20-diameter wheels, because they have proven to be better than others, especially on our roads. I pump them up as recommended by the manufacturer - up to 2.4 atmospheres and I must say that this is a completely universal pressure. I feel comfortable when driving in the city and outside.

Anton, 41 years old.
Prado has been my favorite model for many years, now I’m driving the second generation. It is important to follow the manufacturer's recommendations, but you can be a little flexible and increase the pressure a little. On the recommendation of other owners, I drive 2.4 atmospheres on the front and rear tires and am satisfied.

Vadim, 38 years old.

I've wanted a Land Cruiser 200 for a long time. Not least because of its powerful appearance, in which large wheels play a special role. The main thing is that they are huge not for beauty, but because Kruzak is able to drive where not everyone can. For off-road driving, I keep the pressure at 2.3 atmospheres on 18-diameter ramps.

How to choose the right model for the Japanese Prado 150 jeep

For such a large and massive SUV, it is important to use only the highest quality tires. The main thing is that the size of the Land Cruiser Prado tires must be within the limits allowed by the manufacturer. These products should allow the car to easily move on any surface, both asphalt and the most difficult off-road conditions. At the same time, do not forget that the SUV should brake easily and quickly or, conversely, accelerate. It is necessary to achieve the maximum possible traction in the summer, since at this time of year the average speed of movement is much higher than in winter.

You might be interested All about Yokohama tires (Yakohama)

Prado wheel with winter tires installed

The SUV has permanent all-wheel drive, but the main load goes to the rear wheels. To evenly distribute the load, it is necessary to use wide tires in summer.

Pressure gauge

Short Game

If terrible ice has caught you wearing summer tires, say, at the dacha, and you have to drive some distance on a completely icy road by any means possible, then you should reduce the tire pressure to approximately 1.6 bar. Harmful to tires? Yes. But an accident will cost more. In addition, in such a situation you cannot expect high speed, and overheating of the tires at near-zero temperatures most likely will not happen.

I want to be a T-34!

Does everyone know what caused the excellent maneuverability of Soviet tanks? That's right: wide tracks, that is, low ground pressure. We, having an ordinary, non-all-wheel drive car, are also able to provide it with similar cross-country ability. If your car's wheels sink into sand, snow or sticky mud, it makes sense to reduce the tire pressure. And not only the driving wheels, but also the driven wheels.

riding on the grass

Reducing pressure can also be useful in other cases - for example, to overcome diagonal hanging. If you reduce the pressure in the wheels on which the car rests, their height will decrease and there will be a chance to “catch” on the suspended wheels. Of course, if the car is already on the bottom, then it’s too late to reduce the pressure - it will only get in the way.

Linking Toyota/Lexus sensors 42607-48020 (Pacific PMV-C215)

Linking procedure for Camry (with pressure indication in each wheel), Prado - Automatic

The sensors are paired automatically during the test drive. 1. Install the sensor on the car. 2. Inflate all tires to the pressure recommended by the vehicle manufacturer. 3a. For Toyota Camry, you need to start the binding (select the item change wheels) through the menu of the car’s on-board computer. 3b. For Toyota Prado, with the ignition on or the car running, briefly press the Set button under the steering wheel three times. 4. To bind the sensors to the car, it is necessary to carry out a test drive at a speed of at least 40 km/h for up to 40 minutes.

The binding procedure on other models is registration via OBD (two sets are prescribed).

The new sensor is paired via the OBD2 connector using automotive diagnostic equipment. The procedure for pairing a new tire pressure sensor is carried out in the following order: 1. Before installing the sensor in the wheel, you must write down its unique identifier. The sensor ID is indicated on its body. 2. Mount the sensor into the wheel and install the wheel on the car. 3. Inflate all tires to the pressure recommended by the vehicle manufacturer. 4. Connect diagnostic equipment to the OBD2 connector of the car. 5. Turn on the ignition. 6. Select tire pressure monitoring system from the scan tool menu. 7. In order to determine the identifier of the failed sensor, it is necessary to display all current values ​​​​for the system on the device screen. The screen will display the identifiers of the sensors assigned to the car and the corresponding readings of pressure and temperature in the wheels. By comparing pressure readings, you can determine which sensor has failed (the pressure of this sensor will be zero). We also recommend recording the remaining sensor identifiers, since some systems require re-registration of all vehicle sensors. 8. Using the appropriate menu item of the diagnostic tool, register a new sensor in the car to replace the old failed one or (depending on the system) all sensors, replacing the identifier of the failed sensor with a new one. 9. Clear errors on the tire pressure monitoring system. 9. Turn off the ignition and disconnect the diagnostic tool. 10. The system will need time to recognize sensors after they are registered - this can take up to 20 minutes. A test drive may be required. The test drive should be carried out as follows: from 1 to 5 km at a speed of at least 40 km/h. 11. Verification (optional). To confirm that the registration procedure for the sensor (or sensors) has been completed correctly, you must connect a diagnostic tool. Select tire pressure monitoring system from the scan tool menu. The screen will display the identifiers of the sensors assigned to the car and the corresponding readings of pressure and temperature in the wheels. Compare these readings with the pressure gauge readings for each wheel. The possible deviation between the tire pressure as measured by the pressure gauge and the tire pressure as indicated by the diagnostic tool is no more than 10%.

Source alltpms.ru

Reading time: 6 minutes

Car enthusiasts often do not think about what exactly the pressure should be in the tires of their own car. Sometimes they don’t even bother checking these parameters

And this is a very important part of car care. A lot depends on the correct atmospheric conditions inside the tire.

And we are talking not only about the service life of the rubber, but also about human safety.

Pressure can be measured using a pressure gauge. This device is compact and inexpensive. Every driver is required to monitor and systematically check tire pressure. Measurements must be taken at least once every ten days. Simply tapping the tire with your foot, as many car owners do, is not enough. It is impossible to calculate atmospheric indicators by eye.

Measuring device

Toyota Land Cruiser wheel and tire sizes

Suitable tires for Prado 90 - corresponding wheel size:

• 215/80R16 ( 103T ) – 6Jx16 ET30 ,
• 265/70R16 112S – 7Jx16 ET15 ,
• 265/70R16 – 7JJx16 ET15 .

Land Cruiser Prado 90 on R16 wheels

Prado 90 wheels have the following characteristics: bolt pattern (PCD) – 6×139.7 mm , thread – M12 x 1.5 , nominal diameter of the central hole – 106.1 mm .

Mazda 6

Overload

I don’t want to discuss overload: this, you see, is not the point. But, unfortunately, many deliberately overload the car several times a year, not only by filling the interior and trunk to capacity, but also by attaching a trailer, which additionally loads the rear wheels of the tractor. In such cases, we advise you to increase the pressure in the rear tires by at least 0.2–0.3 bar. The tires will only thank you.

Control to zero

If you doubt the accuracy of your pressure gauge, we recommend that you check it immediately after leaving the tire shop, where you were given a known pressure, and measure it with your own measuring device (separate or as part of the compressor). This way you will determine whether your pressure gauge is “lying” too much. For the future, you can put a mark of the correct value directly on the dial.

Toyota Prado 150: selecting tires for the car

Selecting tires for SUVs is a responsible matter that requires a serious approach. Before going to a car store, you need to decide on the type of tires suitable for your car - tires for Toyota Prado vary depending on engine power and wheel diameter. This version of the car provides the ability to install tires of the following sizes:

• 265/65 R17
• 265/60 R18
• 285/55 R18
• 265/50 R20
• 295/45 R20
• 305/45 R20

Also, before choosing a set of tires, you need to check the tire article on the manufacturer’s official website for compatibility with the vehicle’s VIN number - this step will prevent the risk of purchasing a type of tire that is not suitable for the power potential of the power unit installed on the car.

Additionally, it is also recommended to check the date of manufacture of the tires - the best option would be to purchase tires manufactured no later than 2-3 years ago. Otherwise, there is a chance of the outer layer of rubber becoming rough and reducing its elasticity. Which will negatively affect both controllability and service life.

What tire sizes does it recommend to install?

The choice of tires is a problem for most Toyota Land Cruiser Prado 150 owners due to the fact that the “range of sizes” is limited. Driving for a long time on tires with inappropriate sizes leads to decreased vehicle control and emergency situations.

Explanation of the abbreviation:

• wheel rim width;
• surface diameter;
• reach length;
• tire width;
• height in percent;
• diameter of the metal rim.

The higher the disc is installed on the car, the greater the risk of skidding and reduced control efficiency. At the same time, excessively low wheels also negatively affect ground clearance, lower ground clearance, and limit the vehicle’s maneuverability.