Toyota Corolla wheel sizes, bolt pattern

Disks or rollers used on Toyota Corolla before 2012 can be made of steel or light alloys. Blanks for steel products are produced by stamping. Conventional steel rollers are welded from these stamped blanks, but they are not resistant to corrosion and are difficult to balance. Such discs are easily deformed and easily straightened, but they last quite a long time.

Casting products use an alloy of magnesium and aluminum as the material, and such rollers are manufactured by casting in a mold or by forging. Alloy wheels are very light and work optimally without loading the car’s suspension, but they are more expensive than steel ones. Forged products are more durable and withstand shock loads well, but their price is significantly higher than that of light alloys.

General background information

Ranges of possible values for tires and wheels of Toyota Corolla 2007.
Tires

Diameter	14″–17″
Width (mm)	175–225
Profile (%)	40–70
The smallest size	175/70 R14
The biggest size	225/45 R17

Wheel disks

Diameter	14″–17″
Width (inches)	5.5–7.5
Reach (mm)	39–45
Drills	5×100, 4×100, 5×114.3

Photo

Expert advice

When choosing tires for a car, you must first follow the manufacturer's instructions. Ask yourself a few questions.

On what roads will the car be primarily used?
Do you need increased cross-country ability?
How much of the route will be city roads and how much will be highways?
Will the vehicle carry heavy loads?

The answers to these and similar questions will help determine which tire parameters you need to pay special attention to.

How to choose the right wheels for Toyota Corolla 2007?

3 types of rims:

Stamped (economical price category) - made from a sheet of iron by stamping on a press.
Light alloy - manufactured by casting (more reliable than stamped ones).
Forged (the highest quality and more expensive than the previous ones) - made from light alloys by stamping at high temperatures.

The choice depends on financial capabilities. However, it should be borne in mind that the quality of the road surface on which you have to drive every day must also be taken into account.

So, if it gets into a hole, a stamped disk will bend and will not cause harm to the tire, but a forged or cast one can cut it. There is a possibility that the cast disc may burst or crack.

It should also be noted that repairing “stamping” wheels is cheaper than repairing cast or forged wheels. But wheels with high-quality cast and forged disks kill the suspension less, because lighter and have more perfect geometry (better balanced).

The same wheels may or may not rub with tires on the same car - wheel alignment adjustment will help here.

What is the tire pressure?

It is the driver's responsibility to constantly monitor tire pressure. This will avoid standard problems associated with vehicle operation. An abnormal pressure value often causes:

deterioration of management;
uneven tread wear.

Often the car owner independently reduces the pressure in the wheels of his own vehicle. This reduces the load on the suspension, and the car “passes” various road irregularities an order of magnitude easier. But it is worth noting: a decrease in pressure even by 0.1 MPa leads to serious problems. The main ones include:

increased fuel consumption;
rapid wear of the outer tread segments;
the car becomes less maneuverable.

An overinflated wheel causes no less problems. The central part of the cylinder begins to wear off quickly. In addition, at ambient temperatures of more than 60 degrees Celsius, the tire may simply explode. Which will lead to driving into the oncoming lane.

How to spot a fake

Despite the high quality, as well as production control, sometimes you can find negative reviews about Advics pads on the Internet. The most common reason for this is the use of counterfeit products. This is quite easy to find in stores.

And it’s also easy to distinguish it from the original

When purchasing, you need to pay attention to the following:

packaging quality;
presence of instructions inside in English and Russian - well printed;
lack of polyethylene on the pads themselves.

None Inside there must be instructions in Russian and English. Moreover, if the font is difficult to read, then again it is most likely a fake. Real pads made in Japan are never sealed in cellophane.

2008 Toyota Corolla bolt pattern

The 2008 Toyota Corolla belongs to the 10th generation, which was produced until 2012 in a sedan body. This is one of the most popular Toyota cars on modern Russian roads. Drivers value this model primarily for comfort, convenience, handling and reliability. Wheel replacement is usually necessary to replace factory iron wheels with cast or forged ones for decorative purposes. Tires are replaced with the change of seasons and as the tires wear out.

"Toyota Corolla"

In the tenth generation of Corolla, five disc options are available with this drilling pattern:

6JxR15 ET39;
6.5JxR16 ET45;
6.5JxR15 ET39;
7JxR16 ET45;
7JxR17 ET45.

For the 2008 Toyota Corolla, the manufacturer provides five tire sizes:

195-65 R15 91H;
195-60 R15 88T;
205-55 R16 91V;
215-45 ZR17 87W;
225-45 R17 93V.

If we talk about the ground clearance of the 2008 Corolla, it is 15 cm, which, according to reviews, suits all drivers. The length of the wheelbase is 2.6 m. The Corolla's bolt pattern is similar to that of the Toyota Auris and their wheels can be interchangeable.

Tire size for Toyota

Different Toyota models have different tire sizes. They depend on the size of the wheels, rims, wheel bolt pattern, and parameters of the car’s wheel arches. Tires are replaced regularly by the owners. Below we will consider suitable tire sizes for some of the Toyota models.

"Toyota Kaldina"

Toyota Caldina I (years of production - 1992-1997) - tires are installed in standard sizes 175/70 R14 with a load index of 91 and a speed index of S and 185/65 R14 with a load index of 86 and a speed index of S;
Toyota Caldina II (manufacturing years - 1997-2002) - tires are installed in sizes 175/70 R14 with a load index of 91 and a speed index S, 205/60 R15 with a load index of 91 and a speed index H, 195/55 R15 with a load index of 84 and 88 and speed indexes H and V, 195/60 R15 with load indexes 88 and speed indexes H and V, 185/65 R14 with load index 86 and speed index S;
Toyota Caldina III (manufactured in 2002) - tires are installed in size 195/65 R15 with a load index of 91 and a speed index of S.

Toyota Caldina

"Toyota Rav 4"

The Toyota RAV4 is a compact crossover that has been produced in Japan since 1994. The number “4” in the name indicates permanent all-wheel drive. The car continues to be produced to this day; there are currently five generations of Toyota RAV4. Tire sizes depend on the generation of the car and the years of its manufacture:

Wheels for Toyota Corolla (Toyota Corolla)

For a long period, vehicle owners had the opportunity to provide their car only with large and bulky stamped wheels, which were not disappointing with their design. Fortunately, today the situation has changed significantly, and customers are presented with a wide range of discs from different manufacturers and different designs. Models have appeared that are distinguished by their low weight with high levels of strength, reliability and long service life. One of the most preferred solutions in terms of design, strength and lightness are alloy wheels.

They are made from high-quality aluminum alloys, which are resistant to moisture, light weight and a variety of design solutions. They are not restored when damaged, but are one of the most popular.

Today we presented a wide range of aluminum rims for Toyota Corolla from various manufacturers. However, it should be remembered that when choosing disk products, you should definitely follow the factory recommendations regarding the radius of the disks.

Selecting too large or small disks that do not meet the recommendations will lead to negative results:

fuel consumption increases significantly;
the wear rate of the suspension increases;
maneuverability and controllability deteriorate.

We offer to select disks automatically using our catalog. The selection of these elements is made based on many factors, including:

mounting diameter, which must completely coincide with the inner radius of the tire;
the number of holes for installation, as well as their diameter - the disk designation system must match that specified in the vehicle’s operating manual;
wheel offset - the distance from the wheel mount to the symmetrical plane. If the wheel is wide with a short offset, then this gives the car additional stability and design, but increases the load on the hubs;
rim width indicators - it determines riding comfort and speed.

To select the appropriate wheel size, you just need to select the model and year of manufacture of the car. The system itself will select the most suitable disks according to these characteristics. If you have any questions, you can contact the support service - our employees will provide the most comprehensive information, as well as assistance in selecting the right equipment.

Toyota Corolla wheel bolt pattern

Toyota's bolt pattern is a sure step towards a unique car design. To improve the stability of the machine and give it a unique image, the original wheels are replaced with wider ones. It also improves the car's handling and gives it a distinctive look. During installation, care must be taken to ensure that the tires are low profile. These tires may be less comfortable, but they provide better performance.

Tire pressure for Toyota Corolla

Toyota Corolla is one of the most popular cars not only from Toyota, but throughout the entire automotive world. This car became a real bestseller and sold between 13 and 17 million copies.

pieces, depending on the count. The car is famous for its quality and price.

Toyota has proven that a good car with the same performance and design can cost relatively little money.

Corolla represents the C-class of cars, which are small-sized and subcompact city cars. Today it is available with several engine options:

DOHC, 16-valve Dual VVT-i, 4-cylinder, in-line / 1.33-liter gasoline with a power of 99 hp. on a 6-speed manual transmission;
DOHC, 16-valve Dual VVT-i, 4-cylinder, in-line / 1.6-liter gasoline with a power of 120 hp. on a 6-speed manual transmission;
DOHC, 16-valve Dual VVT-i, 4-cylinder, in-line / 1.6-liter gasoline with a power of 120 hp. with variator;
DOHC, 16-valve Dual VVT-i, 4-cylinder, in-line / 1.8-liter gasoline with a power of 140 hp. with variator;
Diesel from 155 hp up to 175 hp with an engine capacity of 2.0 liters./li>

The smooth ride of the car is ensured by the McPherson front independent suspension and rear beam from Toyota developers. The car sits on 15-inch wheels, which maintain a tire pressure of 1.8 to 2.2 bar for a smooth and safe ride.

Tire pressure is one of the most important components of a good and safe ride. Normal pressure should be maintained in the range of 1.7 to 1.8 bar in the front tires and 1.9-2.0 bar in the rear.

These data are valid when the car is loaded with three people and a maximum of 170 kilograms of cargo at speeds up to 160 km.

When driving faster, you should increase the tire pressure by 0.1 bar for every additional 10 km/h.

With a maximum load of Corolla for 4 people and approximately 600 kg of cargo, it is necessary to maintain pressure at 2.0-2.1 bar in the front tires and 2.2-2.3 bar in the rear.

This data is valid for the above versions of a car with a manual transmission; if your Corolla has an automatic transmission or a CVT, it is worth increasing the tire pressure by 0.2 bar from the standard parameters. This is due to the fact that both gearboxes place a large load on the front suspension.

Advice: if it is important for you to keep the suspension in good condition, fuel economy is significant and gentle handling is important, increase the tire pressure by 0.3 bar from the standard parameters recommended above. The problem of a sudden decrease in tire pressure may indicate problems with the wheel as a whole or damage to the wheel from a nail or a piece of glass

The first problem occurs when the spool is faulty, the second when the wheel is pierced by a sharp object without remaining in the body of the tire

The problem of a sudden decrease in tire pressure may indicate problems with the wheel as a whole or damage to the wheel from a nail or a piece of glass. The first problem occurs when the spool is faulty, the second when the wheel is punctured by a sharp object without remaining in the body of the tire.

In order to avoid problems with the suspension in the future and to avoid accidents with skidding or poor braking distance due to tires, you should check the pressure every 2-4 weeks. If a visual inspection shows a reduced pressure level, inspect the wheel; if no breaks are found, pump it up. If the tire pressure is below the established norm of 1.7 bar after a few hours, go to a service station.

Note: on cold tires the pressure is slightly lower by about 0.1-0.2 bar, when driving the pressure increases by 0.3-0.4 bar due to faster air circulation, based on this you should not panic when the pressure is not warm tires will be 0.1-0.15 bar lower.

It is worth understanding that correct, good tire pressure affects fuel consumption and your safety, because driving on tires with reduced pressure is several times more difficult and dangerous, because the braking distance and acceleration speed are reduced.

READ MORE: Toyota Corolla wheel bolt pattern

Features of rims for Toyota Corolla

The Toyota Corolla wheel rims currently offered on the market are very high quality parts. Reliable light alloy materials are used for production, thanks to which the spectacular appearance is preserved for years, as is protection against corrosion.

Choosing the optimal rims for Toyota Corolla wheels The best option recommended by the manufacturer of the Toyota Corolla is 2.2 atmospheres.

However, this value is not constant and is largely determined by driving speed. In addition, the influence of which Toyota Corolla wheels and the size of the tires installed on the Toyota Corolla wheel rims. There is an important feature of models produced in the period from to year - here the pressure is not equal across all four supports. The pressure in the front should be slightly lower than in the rear - a difference of only 0.1 atmosphere is enough.

If the Toyota Corolla has products of size R16, then for travel at speeds up to kilometers per hour, the optimal value will be a pressure of 2.2 atmospheres. From the markings we can say that they are larger than the previous ones, their width is already 7 inches and the rim diameter is 17 inches.

How to identify your consumer

At the very beginning, you should decide on two main questions: what is being sold and to whom.

What – product, service or complex. It is not recommended to immediately take the plunge and withdraw 500 SKUs. It is much safer to start with a small but well-balanced product portfolio.

After all, a new market and new products are something that the consumer has never tried. The buyer needs to recognize the need, get used to it, get acquainted with the brand and have the first customer experience.

For business, this is the time of the first wave of collecting feedback from consumers about the brand and products, because the first impression cannot be made twice. It is recommended to start with the must-have assortment, that is, with those SKUs that are 100% necessary in the assortment. For example, the segment of wireless solutions (smart home) can be successfully started with 6 SKUs: two types of smart video cameras, three sensors and a smart socket.

A global example of such a product launch model is Kylie Jenner’s cosmetic empire KYLIE COSMETICS. The enterprising younger sister of the Kardashian-Jenner clan began to instill love for her brand with one product - a matte lipstick + pencil set, which became a bestseller. Later, the brand’s product portfolio included eyeliners, eye shadows, blushes, powders and much more. In 2021, Kylie is the youngest member of the Forbes list among highly paid stars under 30 years old with an annual income of $41 million.

Today, customers are the main asset of a business. An important and responsible stage is the precise determination of the target audience (TA) of the brand and its characteristics. A mistake here, as at the positioning stage, is almost fatal.

You should not skimp on choosing a quality agency that will do a detailed study of your target audience. It is necessary to clearly and in detail segment the audience, identify the core, determine what needs and “pains” each segment has, what is the motivation for consumption, what values will the client receive if he uses the product.

The Russian market, especially FMCG, presents one big failure in defining the target audience. The famous brand sells candies in the middle price segment and sales are not going well. The product manager improved the quality of the packaging and increased the price, thus reorienting the product to a different target audience, and sales increased. At the same time, the consumer properties of the sweets have not changed. There is no need to be afraid to put forward theories and test them; on the contrary, you should “dig” the audience.

It is important to understand the geography of future sales, because the product values for consumers in Kaliningrad and Tatarstan may be completely different, and this will require adjustments in the communication strategy depending on the sales region. Therefore, the target audience must be developed taking into account the future geography of the brand’s presence

Quantitative and qualitative research indicators will provide the basis for planning purchase and sales volumes, geography of sales offices, and development of a marketing strategy

Therefore, the target audience must be worked out taking into account the future geography of the brand’s presence. Quantitative and qualitative research indicators will provide the basis for planning purchase and sales volumes, geography of sales offices, and development of a marketing strategy.

Learning to read tire and wheel markings

For example, consider the designation printed on the tires of the IX generation Toyota Corolla: 205/55 R16 91V.

The tire is of radial design (the designation contains the letter R), 205 mm wide. The ratio of height to width is 55%. To calculate the parameter, you need to multiply the width by 0.55. In this example, the tire height is 112.75 mm.

Wheel rim – 16 inches. Some people mistakenly believe that the letter R stands for radius and read the parameter "P15" or "P16" as a 15 or 16 inch radius. In reality, R with a numerical value is the diameter.

Tire and wheel markings

The tire index is 91, that is, each axle of the car should carry no more than 615 kg. Speed class – V – the tire is designed for driving at speeds of 240 km/h and above. The numerical values of tire coefficients and speed classes for Toyota Corolla tires are given in Tables 1 and 2.

Table 2. Explanation of speed classes

Class designation	Upper limit of operating speed, km/h
S	180
T	190
H	210
V	240 or more
W	270

On the Corolla disc you can find a code of the form: 6Jx16 ET 45 4x100 d54.1. Let's decipher all the parameters. The rim width is 6 inches, the disc diameter is 16 inches. The letters “Jx” encode the design features of the disk. The number of mounting holes is 4, their centers are located on an imaginary circle d100 mm. Disc offset (ET45) is 45 mm, the abbreviation ET means that the value is measured in millimeters. The last number (54.1) indicates the diameter of the hole in the center of the disk in millimeters.

Wheels for Toyota Camry

Toyota Camry has been represented for several generations. However, now only the 4th generation and above are relevant. 1, 2, 3 series are practically not used and are not visible on the roads.

For the 4th generation Camry, which was produced from 1994 to 2001, the factory recommends installing 15 or 16 radius wheels. In this case, the bolt pattern should be 5/114.3. Reach – 6x15 ET 45.

For the 5th generation (2001-2006), rims with the same standard sizes are suitable, but you can choose a larger offset.

Generation 6 and above have an almost identical platform and impeccable design. It is already possible to install models with a larger radius on them. 15 here look inconspicuous, since the body has become larger in appearance.

The factory specifies 16-18 wheels.
Bolt pattern, like other generations - 5/114.3,
Reach – 7x17 ET 45 or 6.5x16 ET 45.

Bolts for Toyota Camry should be used with a diameter of 60.1 mm. In terms of design, wheels for Toyota Camry are presented in a wide range, you can choose the most suitable ones, the main thing is that there is no discrepancy with the recommended parameters.

Wheel rim bolt pattern

The most competent decision would be to choose original wheels for Toyota Corolla.

You need to understand why exactly such rollers are optimal and non-destructive for suspension. In this case, it is necessary to understand such a concept as wheel rim bolt pattern.

The manual for the Toyota Corolla states what this notorious bolt pattern should be. It clearly states that in cars produced from 1999 to 2001 this parameter is 4x100 mm, and in subsequent years it became 5x100 mm. In fact, this means that the diameter of the circle on which the holes for the bolts (studs) are located is 100 mm, and the number of these bolts is four, and for later models - 5 bolts.

Practical recommendations

The choice of tires is associated with determining specifications, sizes and pricing policies. Toyota Corolla is a budget car. Therefore, the middle price segment allows the buyer to choose middle or economy class tires.

As a rule, tire widths have the following values: 175, 195, 205 and 215, in combination with profiles: 70, 60, 55, and 40, as well as diameters: 14, 15, 16 and 17. This indicator determines the unique tire size of each type.

Important! The manufacturer has set the tire pressure indicator for all types of tires, which is 2.2 atm.

In addition to the standard size, tires differ in the season of operation. According to this indicator, tires are presented as winter, summer and universal. To ensure resistance to high temperatures, hard rubber is used to produce summer tires.

For winter with harsh climatic conditions, tires are made of soft rubber. Summer and winter tires differ in shape, tread depth, and the presence of studs. When purchasing products for cars, it is necessary to take into account the seasonal characteristics of operation: frost, snow, ice in winter and heat, water, dirt in summer. However, to improve vehicle handling within the season, summer and winter tires are also equipped with treads with different patterns.

Recommendations from experts

Tire pressure

The most optimal pressure for Toyota Corolla among car enthusiasts is considered to be 2.2 atm. However, this value should vary depending on the speed and tire size. Front pressure for models 1997 - 2002 by 0.1 atm. should be smaller than the back.

For R16 pressure depending on speed is recommended:

2.2 atm. up to 160 km. h,
2.5 atm. more than 160 km.h.

Toyota Corolla wheel bolt pattern

The bolt pattern shows the location of the bolts securing the wheel to the hub, the number of bolts and the dimensions of the hole for the hub.

The standard Corolla bolt pattern is 5 x 100 with an offset of 35...38 and a hole diameter for the wheel hub of 54.0 mm. The bolt pattern parameters must be taken into account when changing the wheel group, since other models often use a different bolt pattern. These parameters are always indicated in the technical data sheet.

Tires and wheels for Toyota Corolla 2007, wheel sizes for Toyota Corolla 2007

Its meaning is also deciphered using a special table. Toyota Corolla E wheels and tires are supplied in two versions, in addition to the one already discussed, these are also wheels marked 7JxR17 ET50 5x According to the marking, we can say that they are larger than the previous ones, their width is already 7, and the rim diameter is 17 inches. And finally, the recommended tire pressure for Toyota Corolla is 2.

However, this value should vary depending on the driving speed. Black Corolla on huge wheels. Toyota Corolla wheels Discs E In the Toyota Corolla E model, the bolt pattern of the wheels is made according to the pattern of five holes located in a circle with a diameter. The drilling of the disk has the marking 5x, which is already familiar to us. The cast samples in photo 3 are located in the lower tier.

However, it has been noticed that stamped ones can withstand the impacts of road irregularities more easily than cast ones. Even if a dent forms in the stamping, it is often fixable. But the casting cracks and after that only needs to be replaced.

Made from light alloy materials, Toyota Corolla cast wheels do not rust and retain their good appearance for a long time.

Technical characteristics of 2nd generation

The dimensions of the 2nd generation Toyota Corolla Verso are almost the same for the 2003 and 2007 models. And equal to 4360 mm in length, 1770 mm in width; in 2003, the height of the Corolla Verso was 1620 mm, and in 2007 it increased to 1660 mm. The weight of the car depends on the configuration and varies from 1355 to 1435 kg.

Bright instrument panel. For girls?

The ground clearance of the second generation Toyota Verso is about 153 mm. Be careful, a loaded car loses at least 2 centimeters in ground clearance. The wheelbase is 2750 mm. The trunk volume in the Corolla is 423 liters; it can be increased by folding down one or two rows of passenger seats.

The volume of the Toyota Verso fuel tank is 60 liters. for model R10 and 70 l. for E121. Toyota Verso fuel consumption ranges from 7.5 to 9.9 liters per 100 km.

Engine and transmission

Toyota corolla verso 2007 and 2003 is equipped with a 1.8 liter 1ZZ-FE engine with a power of 129 horsepower. Toyota Verso was produced with two types of transmissions: Manual 5 or Robot. The robot is a middle option between automatic and manual, but in reality this type of transmission has more disadvantages than advantages.

The motor has a torque of 170 N*m.

Modifications and their dimensions

Since the late 60s, when the Corolla first appeared in the sight of motorists, 11 generations of the car have already changed and the 12th is being produced. We, of course, will not go into the jungle of history, but will look at which wheels are suitable for the latest generations of Toyota Corolla.

2001-2006 (9th generation)

This version in the E120 body was officially presented in Frankfurt in 2001 - sedans and hatchbacks 3D and 5D. It was this generation that gained the greatest popularity, distinguishing this brand from other Toyota cars.

In Europe, it began to be sold in 2002 with gasoline engines (up to 1.8 l) and diesel engines (up to 2.2 l). And now, 17 years later, many cars of that generation are still in service.

6Jx16 4/100 ET 45

2007-2012 (10th generation)

The next generation saw the Corolla line-up shrink as the hatchbacks were spun off into a separate model called the Auris.

There are sedans with various engine modifications and two design solutions for manual transmissions. They began to be sold in Russia in 2007.

6.5Jx16 5/114.3 ET 45

7Jx17 5/114.3 ET 39

6Jx16 4/100 ET 45

2013 – 2021 (11th generation)

By the summer of 2013, the eleventh version of the four-door Corolla was presented to the world. Let's see what has changed in terms of wheelbase:

6.5Jx16 5/100 ET 39

2018 onwards (12th generation)

The latest version of the Corolla was released at the 2018 New York Auto Show. There are no small cars in this generation at all, but there are only 2 engine modifications: 1.8 and 2.0 liters.

6.5Jx16 5/100 ET 39

Wheel sizes and tires for Corolla E180

Beautiful Corolla - Picture

E180 wheels

The bolt pattern on a Toyota Corolla is a design feature of the wheel rim, which ensures its attachment to the car hub. It consists of several holes located along its inner diameter. These holes then accommodate the hub studs.

Along with the term razboltovka, the term sverdlovka is also used. The pattern of bolting and drilling is determined by the diameter of the circle, as well as the number of holes. Bolt bolt marking takes both parameters into account.

Thus, the Sverdlovsk Toyota Corolla modification E 180 has the formula 5x114.3. Here the number 5 shows the number of holes, and 114.3. diameter of the circle in millimeters. However, the drilling formula is only part of the complete marking. This is what the full markings of the E 180 model look like - 6.5JxR16 ET45 5x114.3.

To understand all the components of the marking, it is necessary to describe what the numbers and letters in the disk size mean. Here is its transcript:

The number 6.5 shows the width in inches, and the J symbol contains information about the shape of the rim flanges. The shape of the flanges matters when installing tires.
In the abbreviation R16, the letter symbol R encodes the shape of the disk design. In all the Corolla models discussed here, it is radial. This means that the spokes run along the radius of the wheel. The number 16 indicates its diameter, also in inches. This parameter determines the disk sizes.
The disc offset parameter is encrypted in the symbols and numbers of ET45. Its value is equal to the distance between the plane with which it is pressed against the hub and the cross-sectional plane. The ET45 marking shows an offset of 45 mm.

White Corolla 180 on flashy wheels
The Toyota Corolla manufacturer supplies high-quality alloy wheels. But for motorists, this detail is also an element of car decoration. Their selection is huge, since the market for this product is unusually developed. However, we must always remember that deviations from the factory parameters: weight and dimensions may be fraught with undesirable consequences.

11th generation Corolla tires

The wheel type mentioned above (6.5JxR16 ET45) corresponds to the Toyota tire size marked 205-55 R16 91V. But to read this, you need to decipher the numbers and letters in the tire size designation.

Compliance is indicated by their common parameter R16, which indicates the diameter of the tire rim. An error occurs when this marking parameter is taken as the radius of the tire. The tire marking radius parameter does not exist.

Stock Corolla E180 looks great

The numbers 205 and 55 contain information about the width in millimeters, as well as the tire profile in%. The profile is the quotient of the width divided by the height of the tire, expressed as a percentage.

The last three characters of 91V encode the load and speed indices. The load index (91 units) shows the level of maximum permissible load on one wheel. Knowing the load index, you can use a special table to determine its actual value. Here the value of 91 units corresponds to 670 kg. V – speed index shows the maximum permissible driving speed for a given tire. Its meaning is also deciphered using a special table.

Wheels and tires of the Toyota Corolla E 180 are supplied in two versions, in addition to the one already discussed, these are also wheels marked 7JxR17 ET50 5x114.3, as well as tires 215-45 ZR17 87W. From the markings we can say that they are larger than the previous ones, their width is already 7 inches and the rim diameter is 17 inches.

And finally, the recommended tire pressure for Toyota Corolla is 2.3 atm. However, this value should vary depending on the speed of movement.

Black Corolla on huge wheels.

Recommendations for bolt removal

This parameter can be measured in several ways. To make the work easier, professionals have created special tables that indicate basic information about each model. It rarely happens that you have to calculate the parameters yourself. A similar figure from Toyota typically includes PCD components with two numbers separated by a fraction.

Here is a special table:

The number of bolts that hold the wheel is indicated in the table by the first number, but it is also not difficult to count them yourself. The second number refers to the diameter of the circle for Toyota retaining bolts. This indicator can be determined using the appropriate formula. We measure the distance between two bolts located parallel to each other, and then multiply this indicator by a constant.

Depending on how many bots are involved in fastening the disk: with three holes - 1.155, with four - 1.701. An auxiliary tool in this work can be a caliper. The resulting value will be considered the second digit in the bolt pattern indicator of these elements of a Toyota car.

Discs for this model are also often changed in order to improve external performance and driving characteristics. In such a situation, the factory Corolla parts are removed. In their place, non-original elements are installed, which may have a unique design.

Toyota bolt patterns must be carefully checked to prevent the mechanisms from loosening while driving.

If certain parts do not match your vehicle's specifications, it is best not to install them. And try to choose others so as not to cause damage to your car. To make your Toyota look beautiful without compromising its safety characteristics, you need to pay special attention to the bolt pattern.

Models of alloy wheels WSP Italy for Toyota cars

The predecessor company to Toyota Motor Corporation arose when the Toyoda Automatic Loom Works, a loom manufacturer, established an automobile division in 1933.

The first engine was assembled literally immediately, followed by the first A1 passenger car and the G1 truck in 1935.

To an independent company, Toyota Motor Co., Ltd. the company separated in 1937.

After the war in 1947, mass production of passenger cars of the SA model began.

10 years later, Toyota Crown begins exporting to America (the first Japanese car in the USA).

In the 70s, new factories were built, developments were carried out and technical improvements were introduced, thanks to which budget models became more and more “advanced”. Celica, Sprinter, Carina, Tercel, Mark II models are entering the market.

In 1982, Toyota Motor Corporation was formed and production of the Toyota Camry began. In the 80s, Toyota established itself as the largest Japanese auto manufacturer, ranking third in terms of production volumes in the world.

2007 was a landmark year for Toyota Motor - for the first time the company produced and sold more cars than the auto giant General Motors. In 2012, Toyota managed to repeat its success, overtaking Volkswagen and General Motors.

The secret of Toyota's success was the company's own development - the Toyota Production System, which allowed the brand to produce excellent cars at an affordable price, setting new quality standards.

Now other manufacturers are trying to organize something similar in view of the results that Toyota has achieved: the brand has more than once received the title of “The most expensive automobile brand in the world” in several ratings at once.

Even the owner of a car of the “most expensive brand” does not want to overpay in vain, and WSP Italy provides such an opportunity - replica Toyota wheels satisfy all customer requests for quality at an affordable price! Replica Toyota alloy wheels are suitable for Toyota Auris, Avensis, Aygo, Camry, Carina, Celica, Chaser, Corolla, Land Cruiser, MR 2, Paseo, Picnic, Previa, Prius, RAV 4, Starlet, Supra, Tercel, Yaris, 4 Runner , Hilux and their modifications.

What is the wheel pattern on the 2007 Toyota Avensis and Land Cruiser 200

The mid-size Toyota Avensis passenger car and the Toyota Land Cruiser 200 SUV are outwardly very similar cars. Moreover, their rims have five holes for bolts and are similar in appearance. Below are the wheel bolt patterns for these two vehicles.

The 2007 Avensis and Land Cruiser 200 cars have bolt patterns of 5x100 and 5x150, respectively. The disc offset on the Avensis ranges from 35 to 38 mm, on the Land Cruiser - 40 mm.

What are the differences

The dimensions and parameters of the wheel rims of these two models have a significant difference. These bolt sizes differ in the following parameters:

the diameter of the circle on which the bolts are located - for Avensis 100 mm, for Land Cruiser 200 150 mm;
disc offset - 40 mm for Land Cruiser and 35 for Avensis;
diameter of the central hole.

Corolla wheels: tire and wheel sizes, bolt pattern, drilling

The diversity in tire models comes from load and speed indices; all models differ in them.

The length of the wheelbase is 2.6 m. How the bolt pattern of wheel rims on Toyota cars is measured. Note. There are five main parameters used to measure wheel rim bolt pattern.

Among them: Below are the wheel bolt patterns of the most common Toyota models: At the same time, their wheel rims have five holes for bolts and are similar in appearance.

Wheel sizes

Today, everyone is used to saying in stores when buying only the make of the car and the diameter, like the Toyota Corolla R16. However, such a designation does not actually convey any other information about the wheels of the car.

For example, the basic configuration of the Corolla 150th model 1.4 MT 2008 has R15 wheels. The disk designation is as follows: ET45 6JxR15 5×114.3. The tires also have this parameter: 91H 195/65R15. Each of the codes carries certain information about the car’s disks:

ET45 – disc offset. This parameter is the same for the entire Corolla line. For example, the 150 model has an offset of 45, while cars with a 120 body were equipped with an offset in the range from 33 to 38.
6xJ – shape of the flanges of disc rims. Similar to the offset, it is the same for all cars of the same generation. The width is indicated in front of it, measured in inches. It varies from 6 to 7.5.
R15 is the most famous wheel rim parameter. It indicates the type of part and its diameter, respectively. The first indicator indicates the shape of the structure: regarding Corolla wheels, starting from the 120 model, it is invariably radial (the spokes run like the radius of the circle of the disk).
5x114.3 – number of slots for screwing the disk to the base. Depending on the ]wheel[/anchor], the number may vary, but usually it does not exceed 5–7 holes.

As for tires, there are a number of different parameters:

91H – maximum permissible loads. Here two parameters are combined: maximum speed and stability. The first indicator is indicated by the letters T (up to 190 km/h), H (up to 210 km/h), V (up to 240 km/h).

It’s not worth looking for a higher figure, since the Corolla, whatever one may say, does not accelerate to 270 km/h. 91 – load index. In this case, it corresponds to a permissible load of 615 kg, although there are more resistant rubber on the market.

Regarding wider wheels, it is worth saying that in the Corolla world they are usually used on advanced trim levels. However, 16-inch wheels can be seen on the 160 model with a 1.4-liter diesel unit in 2012. For it, as well as for versions of the machine with a similar disk diameter, the following wheel sizes are characteristic: ET45 6.5JxR16 5x114.3 and 91V 205/55R16, respectively.

Wheel sizes for Toyota Corolla

In recent generations, the Corolla has become very similar to the Camry, but in a shortened version. However, because of this, it did not become more crowded inside.

As for wheels for Toyota Corolla, there are not many variations here. Models with the same parameters are suitable for all generations:

For 16 disks, the relevant parameters are 6.5x16 ET 45.
For 17 inches - 8x17 ET 40, but the offset can be increased to 42.
It is better to choose 15 inches with indicators 6x15 ET 39.
If you like 18 wheel rims, then you should choose from those with parameters 7.5x18 ET 32.

The bolt pattern should be 5/114.3, but depending on the configuration it can be 4/100. This needs to be checked.

About original and non-original disks

A car with original elements, which, by the way, may have a unique design, will look much more efficient than ordinary ones. When motorists notice something like this on the road, they may be tempted to order the same ones for themselves and upgrade their car. However, such innovations often have a negative impact on the condition of the car and the safety of movement.

Original wheel elements that are used to decorate the car are installed on it only if they can meet the established technical parameters. The main technical characteristic is the bolt pattern on the Toyota Corolla.

Do not also forget about the removal of the wheel element. This is one of the main factors that you need to pay attention to during the installation of new elements. If you do not take into account the offset, this may lead to the fact that the discs will be impossible to install, and the suspension elements will provide all-round resistance.

If you decide to make your car unique and beautiful with the help of wheels, this is a great and fresh idea that is always in trend. However, it is necessary to pay serious attention to the development process, since the safety of passengers and surrounding people depends on it.

Toyota Corolla Verso R10 configurations

Toyota Corolla Verso 2007 is available in two trim levels: Sol and Terra. Terra is the minimum required set of car functions, Sol is an expanded one.

The basic configuration of the Corolla Verso has everything necessary for comfortable travel for a large family: air conditioning, heated driver and front passenger seats, and an audio system. Safe trips are made by the presence of an ABS system and brake force distribution, high-quality airbags, and disc brakes. The Terra package also includes wheels of the appropriate type and size, heated side mirrors, steering column adjustment, and a remote central locking control system. An anti-theft system will protect your car from theft.

Corolla Verso interior layout

The Sol package for the Corolla Verso is complemented by functions that make it easier to drive the car in difficult conditions: vehicle stability control system, traction control system, electronic brake booster. In the Sol configuration, travel is more comfortable due to the presence of climate control and cruise control, an armrest for the front seats, and a leather steering wheel. Driving a Toyota Verso in the Sol configuration is more pleasant, thanks to the presence of fog lights, an electrochromic rear view mirror, a rain sensor, and alloy wheels.