Matching the original part number 43550-02010 - Toyota Corolla front hub

Replacing the front wheel bearing in a car service center on Toyota Corolla cars costs an estimated average of 1,500 rubles. for one hub. But if you have to replace not the bearing, but the entire hub, then most of the money specifically for Toyota Corolla cars will have to be paid for the part (this is two, three, or even four times more expensive than the replacement price). The simplest part for the front wheel - the front hub on the Toyota Corolla of the penultimate version of the E150 will cost approximately 2700 - 2800 rubles, also manufactured by GSP (Chinese company), described in more detail below.

An even more important question is when the wheel bearing needs to be replaced, since if this procedure is not carried out in a timely manner, then the wheel may jam on the road and your car (Toyota Corolla) will not be able to continue moving on its own.

Briefly, we suggest taking into account, for example, the following recommendation: The main sign of a malfunction is noise. The hum from the bearing clearly indicates its malfunction, and there is no point in hoping that you will be able to drive on this bearing a little more, since there is a chance, at a minimum, to end up far from the technical center with a collapsed hub, and, at maximum, to become directly the organizer of an impressive accident. But it is not always possible to localize the noise and determine the source of the noise, since the sound spreads throughout the car body very quickly and often the sensations are deceptive: the noise on the left side may actually be from the right wheel bearing.

Characteristics and original spare part numbers

Car front suspension

How to determine the need to replace a bearing in a TOYOTA

1.After driving the car for a long time, gently place your palm on the hub. If it is hot, then this is the first sign of bearing failure.

2. Get behind the wheel of a car, pick up speed up to 40 km/h, open all the windows and listen carefully. If, in addition to the noise of the wheels on the road, you hear a grinding, whistling, or howling noise, then this also indicates a problem with the part.

3.Gain high speed. The sound intensifies and periodically disappears, and then appears with renewed vigor - indicates a problem in the hub.

4.When driving, vibration appears in the cabin. Especially in the back.

Just in case, jack up the car and spin the wheel by hand. You will hear a characteristic cracking sound.

This means that the part absolutely needs to be replaced .

You have decided that there is a breakdown and needs repair.

And you want to do the repairs yourself.

In order to do all this, you need to prepare before starting the repair.

Proposed replacement parts and their costs

Position No. 1 - Front suspension

*Criterion for choosing a spare part: The price is the cheapest…

*Note: The price is selected for the day 09/07/2016, it may change over time.

Description of GSP company:

GSP products are supplied to more than 53 countries around the world.
In 2002, GSP could offer its products to more than 638 models, including cars made in Japan, America, Korea and Europe. GSP is a company that represents Chinese products as high quality products. In 2003, GSP began successful and close cooperation with representatives of other countries. The philosophy of cooperation is based on a good price-quality ratio of products, and is supported by a long warranty period. WEB site: GSP

Front hub - 9326024 - GSP - Toyota Corolla E150 2007 - NRE180 2013 - 2760 rub.

Enter the VIN to check whether the part matches your car:

Position No. 2 - Front suspension

*Criterion for selecting spare parts: Price below average...

*Note: The price is selected for the day 09/07/2016, it may change over time.

GMB company description:

GMB Corporation begins its history in 1943.
During this time, it has gained a reputation as a company that produces high-quality and low-priced suspension, steering, transmission and engine parts: - ball joints; - steering tips; — steering rods; - universal joint crosspieces; — water pumps; — timing belt rollers; — fan thermal couplings; — hubs; — wheel bearings; — clutch bearings; — cardan joints for steering shafts; — tripoid joints for wheel drives. WEB site: GMB

Hub with bearing - GH31930 - GMB - Toyota Corolla E150 2007 - NRE180 2013 - RUB 3,960

Enter the VIN to check whether the part matches your car:

Position No. 3 - Front suspension

*Criteria for selecting spare parts: Reasonable price, average quality...

*Note: The price is selected for the day 09/07/2016, it may change over time.

Optimal company description:

The OPTIMAL company develops and supplies assembly plants with high-quality components and optimal auto parts for the secondary market.
Despite its short period of activity by historical standards (founded in 1982), the OPTIMAL company managed to win the trust of European consumers and compete fully with its more eminent rivals. Bearing sets, suspension parts, chassis, steering and braking systems are produced for a wide range of models from global automakers... The OPTIMAL company is constantly working to improve its products. The latest technologies, modern equipment and the use of high-quality materials allow the company to produce optimal components and spare parts with a long service life. WEB site: Optimal

Wheel bearing - 981706 - Optimal - Toyota Corolla E150 2007 - NRE180 2013 - 4884 rub.

Enter the VIN to check whether the part matches your car:

Position No. 4 - Front suspension

*Criterion for choosing a spare part: The price is the best in relation to quality...

*Note: The price is selected for the day 09/07/2016, it may change over time.

Description of the company BLUE PRINT:

The Blue Print brand has earned a reputation as a leader in terms of the complete range of high-quality spare parts for Japanese and Korean cars.
In July 2008, the product line was expanded to include American vehicles (European specification), allowing Blue Print to become a complete solution for Asian and American vehicles. In January 2011, the Blue Print trademark became part of the bilstein group. WEB site: BLUE PRINT

Front hub assembly - ADT38287 - BLUE PRINT - Toyota Corolla E150 2007 - NRE180 2013 - RUB 4,938

Enter the VIN to check whether the part matches your car:

Position No. 5 - Front suspension

*Criterion for choosing a spare part: The price is the best in relation to quality...

*Note: The price is selected for the day 09/07/2016, it may change over time.

Description of the company KOYO:

Koyo is one of the world's leading manufacturers of ball and roller bearings, lip seals, automotive steering gears and complex equipment.
In terms of production volumes, the company ranks fifth in the world among bearing giants. Using the latest materials and the latest technological advances in its production, Koyo today produces a wide range of hybrid ceramic and special bearings for various extreme applications, such as vacuum or very high temperatures, to meet the increasingly demanding requirements of modern industries. WEB site: KOYO

Front hub - 3DACF041D3DR - KOYO - Toyota Corolla E150 2007 - NRE180 2013 - 5055 rub.

Enter the VIN to check whether the part matches your car:

Position No. 6 - Front suspension

*Criteria for selecting spare parts: Price is above average, quality is acceptable…

*Note: The price is selected for the day 09/07/2016, it may change over time.

Febest company description:

The production program of the German manufacturer FEBEST of repair kits and spare parts includes the most popular parts and assemblies: bushings and boots for steering and suspension parts;
support cushions for the engine, transmission and exhaust system; support bearings for shock absorbers, oil seals, silent blocks, parts for clutch and hydraulic brake systems; hub bearings and hub assemblies, bearings for automobile climate systems, crosspieces for the propeller shaft and for steering parts; steering rods and ends for them, ball joints and numerous fastening elements for car suspension. WEB site: Febest

Wheel hub - 0182-ZZE150MF - Febest - Toyota Corolla E150 2007 - NRE180 2013 - RUB 5,196

Enter the VIN to check whether the part matches your car:

Position No. 7 - Front suspension

*Criterion for choosing a spare part: The price is very expensive...

*Note: The price is selected for the day 09/07/2016, it may change over time.

Description of the TOYOTA company:

WEB site: TOYOTA

Wheel bearing - 43550-42010 - TOYOTA - Toyota Corolla E150 2007 - NRE180 2013 - 10440 rub.

Enter the VIN to check whether the part matches your car:

What causes a wheel bearing malfunction in Toyota Corolla E120–E150

Reasons why this element fails earlier:

• they drove the car aggressively, without taking into account the quality of the road;
• Water got under the seal and washed away the lubricant;
• the car was constantly overloaded.

Operation without overload, careful driving, and regular inspections will extend the service life of the part.

How to determine if a car bearing is failing

The most obvious sign: the wheel begins to emit a constant hum and other extraneous sounds while driving. To clearly determine whether a wheel bearing is working or not, you need to:

• lift the car with a jack;
• hang out the wheel;
• turn on the transmission;
• lightly press the gas pedal.

If you hear obvious noise in the area of ​​the axis, it’s time to change the part.

When to contact service

If the car owner does not have the skills to repair it himself, then he is recommended to contact a specialized service. Carrying out repairs in a workshop saves time. The cost of service depends on the location of the service. Since after servicing the front suspension with the removal of the knuckle, the wheel alignment angle is violated, the parameters are restored on an electronic stand. With makeshift adjustments, handling deteriorates and uneven wear of the tire tread occurs.

What does a node look like?

The unit consists of several parts:

• a steel base that is attached to the suspension arms;
• an external element that allows you to install a brake disc and wheel;
• closed 2-row ball bearing that does not require adjustment and lubrication during operation.

Installation Features

To replace a failed Toyota Corolla 150 wheel bearing, use an attachment and a hydraulic press. In this case, the risks associated with damage to the seat will be minimal. Using this device, press in the new bearing. Do not forget to first clean the seat from dirt and rust, if any.

In rare cases, both bearings fail at the same time. Usually the right side is affected first. This is explained by the fact that it is more susceptible to roadside unevenness. It is better to change all paired parts at the same time. When purchasing, give preference to original spare parts over licensed ones. The price difference is not comparable to Japanese quality.

Replacement process

In order to replace the wheel bearing (rear or front), it is necessary to perform a certain series of actions. First you need to lift the car using a jack, then you should unscrew the wheels, and then remove the calipers, and also remove the nut that holds the hub.

Then you should remove the ball joint, then use a hammer to “knock” the hub out of the support. The next step is to separate the bearing into two parts: internal and external. After this, you should carefully inspect the parts for cracks; if they are not found, then you can begin installing a new element.

It is installed on the external part; before installation it must be treated with VD40. Then all that remains is to install it with a hammer. The assembly of the structure is carried out in the reverse order.

Particular attention should be paid to the process of dismantling the caliper. This is done by unclamping the pads and unscrewing the bolts. They are unscrewed with a socket wrench; the same tool can be used to unscrew the hub nut. Next, all parts should be unscrewed from the rack.

The process must be carried out carefully, trying not to damage the anti-lock braking system sensors.

Choosing a bearing for the front hub on the COROLLA

This is necessary to avoid purchasing low-quality parts or even defective parts.

Don’t even think about buying a product on your own.

Refer to the manufacturer's catalogue. The original number of the Japanese manufacturer is 355042010.

It is naturally the highest quality and most expensive of the entire list of quality suppliers.

You can use good bearings from the following global manufacturers:

Let's proceed directly to replacing it.