The Toyota Corolla is quite easy to maintain; all elements can be easily removed, so removing the rear seat will not be difficult. Disassembling the interior is not difficult, for the most part it is all intuitive. Fastening elements are not disposable; clips and pistons remain suitable for re-installation.
The bolted connections, even on a not new car, are not rusty and can be easily unscrewed. The work is carried out by one person, no additional assistance is required, there is no heavy work.
How to remove the back seat on a Toyota Corolla
If for some reason it is not possible to remove the removed part through the rear doors, you can also use the front side door, on the passenger side.
Seat on a Corolla.
We feel the fasteners with our hand under the seat and pull up. And as a result, the threads on the bolts were licked off... It would seem that you could find the same bolts and screw them in, but that’s not the case.
Toyota Camry XV How to remove seats. Toyota Corolla '08 rear seat back does not recline -...
And now comes the question of how to remove the rear seat on a Toyota Corolla. We do this in order to disconnect the plugs located under the seat. Disassembling the interior is not difficult, for the most part it is all intuitive.
Don't forget to connect this chip after completing the repair. Before washing, they need to be removed. More work for the wire cutters. Well, the lower part is disassembled. Now let's disassemble the back. In this case, there are no various types of latches.
Let's summarize Most often, car repairs continue for a long time.
The master spends much more time getting to the right part. This process is quite labor-intensive, especially when it comes to replacing a part located under the passenger compartment. Features and removal process Some interior elements are held on by various latches, but there are exceptions. A striking example of this is removing the rear seat on a Toyota Corolla E. In this case, it is almost impossible to do without instructions.
The rear seat is presented in the form of a sofa. This applies to all cars starting from the year.
You need to unclip the plastic latches by lifting the sofa a little. This is easy to do, so let's move on to the next step; remove the back. In this case, there are no various types of latches. You will have to pick up a wrench and unscrew the 4 nuts.
The user said thank you:
There is very little left to do - unscrew the seat belts, which are also secured with nuts, and remove the backrest from the passenger compartment. Please note that you must first unclip all the pins that hold the shelf in place; After removing the shelf from the car interior, a feature will immediately catch your eye.
Its continuation is on the shelf. The chip is disconnected as soon as the shelf is removed.
Points worth paying attention to
Before dismantling the so-called “sofa”, it is necessary to remove all unnecessary elements, including the spare wheel cover. You can do without this, but you will have to spend more time and effort. On a 2003 Corolla or any other year, it will be difficult to remove and remove the seat from the interior.
If for some reason it is not possible to remove the removed part through the rear doors, you can also use the front side door, on the passenger side. The passenger seat folds down and everything is easily removed. The only thing that can complicate this process is the steering wheel. But it is also adjustable in height, so no need to worry.
To facilitate repairs, you must first remove the head restraints. This must be done one at a time, starting from the left side and ending with the right headrest. It will take relatively little time, but the process of further repairs will be easier. Place the head restraints somewhere away from the car in one place, lock them in this room and forget about their existence until the repair is completed.
Don't forget about the airbag(s) (their number is often indicated in the illustration at the front of the cabin).
They also need to be disposed of while the work is being carried out. Otherwise, nothing good will come of it, because airbags are too sensitive to various mechanical influences. A small blow and you will have to visit the nearest store with spare parts for your Corolla or Axio. Below is a list of activities that must be carried out to remove the airbag:
- there are several fastenings, so you need to choose one of them, which will be detached first;
- Grab the pad where the first fastening is located.
- lift the airbag up;
- repeat the procedure with the remaining fasteners until all are snapped off;
- Now the pillow is held on by two fasteners, which snap off last and are located behind. This must be done carefully so that you do not have to repair it later.
The process of removing the Toyota Corolla seat back is described above. Please note that this is done in exactly the same sequence as dismantling the head restraints (from left to right).
Disassembling E120 seats
Don't forget to connect this chip after completing the repair. It is responsible for the rear brake light, right and left turn signals. The rear seat has been removed and the planned repairs can begin.
You can do without this, but you will have to spend more time and effort. On a Corolla of this year or any other year, it will be difficult to remove and remove the seat from the interior. The work is carried out by one person, no additional assistance is required, there is no heavy work.
Why remove the rear seat? It is removed to gain access to the gas tank or its elements, float, sensors, etc., as well as to obtain a through opening into the luggage compartment, and for interior work. These works will be carried out quickly, vary in labor intensity, but will be of a very important nature.
Since the repair of such important elements is a priority. And now comes the question of how to remove the rear seat on a Toyota Corolla. For this, there is a lot of reference literature, Internet resources that tell in detail about all the works and their order of creation.
Toyota Corolla '08 rear seat back does not recline
In order to dismantle the seat, you do not need many tools, ordinary socket wrenches. Putting the handbrake in order on a Toyota Corolla Video instructions: To remove the lower cushion, you need to unscrew two bolts located under the seat trim, it simply lowers from below, then they turn away and the seat is removed from the pistons.
Points worth paying attention to
Before dismantling the so-called “sofa”, it is necessary to remove all unnecessary elements, including the spare wheel cover. You can do without this, but you will have to spend more time and effort. On a 2003 Corolla or any other year, it will be difficult to remove and remove the seat from the interior.
If for some reason it is not possible to remove the removed part through the rear doors, you can also use the front side door, on the passenger side. The passenger seat folds down and everything is easily removed. The only thing that can complicate this process is the steering wheel. But it is also adjustable in height, so no need to worry.
To facilitate repairs, you must first remove the head restraints. This must be done one at a time, starting from the left side and ending with the right headrest. It will take relatively little time, but the process of further repairs will be easier. Place the head restraints somewhere away from the car in one place, lock them in this room and forget about their existence until the repair is completed.
Don't forget about the airbag(s) (their number is often indicated in the illustration at the front of the cabin).
They also need to be disposed of while the work is being carried out. Otherwise, nothing good will come of it, because airbags are too sensitive to various mechanical influences. A small blow and you will have to visit the nearest store with spare parts for your Corolla or Axio. Below is a list of activities that must be carried out to remove the airbag:
- there are several fastenings, so you need to choose one of them, which will be detached first;
- Grab the pad where the first fastening is located.
- lift the airbag up;
- repeat the procedure with the remaining fasteners until all are snapped off;
- Now the pillow is held on by two fasteners, which snap off last and are located behind. This must be done carefully so that you do not have to repair it later.
The process of removing the Toyota Corolla seat back is described above. Please note that this is done in exactly the same sequence as dismantling the head restraints (from left to right).
How to Remove a Toyota Corolla 150 Seat
Why sit in the back of a Toyota Corolla
In most cases, car repairs take a long time. Replacing a worn/broken part doesn't actually take long. How to remove the rear seats on a 2001 Toyota Corolla 120. The wizard spends more time getting to the right side. This process takes a long time, especially when it comes to replacing cab parts.
Features and removal process
Some interior design elements run throughout different bars, but there are exceptions. A striking example is the removal of the rear seat of a Toyota Corolla E120. In this case, it is almost impossible to do without annotations. There is not much information on the Internet that allows you to remove “cockroaches” without outside help.
The rear seat is in the shape of a sofa. This applies to all vehicles from 2002 onwards. Changing the oil for an automatic transmission of Toyota Corolla 150 and 120: replacing the fuel filter of Toyota Corolla 120 and 150: removing it is not difficult even for a beginner.
- You need to pry off the plastic latches by slightly lifting the sofa. It's simple, so let's move on to the next step;
- remove the back In this case there are no different types of latches. You will need to pick up a wrench and unscrew the 4 nuts. for example, replacing the Toyota Corolla filter 1 with 150 changes for “Fuel Change”. This is not much - unfasten the seat belts, which are also secured with nuts, and remove the backrest. Which shelf is it kept on?
- Having removed the shelf from the interior, the chip immediately catches your eye. Its continuation is on the shelf. The chip is disabled when the shelf is removed. Don't forget to connect this chip after repair. Cruise control Toyota Corolla E150 and E120: how to install Do you want to install model car tires on your Toyota Corolla yourself. How to disassemble. Responsible for rear brake lights, right and left turn signals. With the back seat removed, you can begin scheduled repairs.
Viewing glasses
Let's sum it up
It is worth noting that even an inexperienced car owner should not have any particular difficulties when carrying out such work. This article describes the entire process in detail and describes the nuances. What difficulties do you encounter? Write about it in the comments.
Replacing the front seat
You will need a 14 key.
The work is shown using the example of the left front seat; the right seat is removed in the same way.
1. Move the front seat all the way forward.
2. Pull upward and, overcoming the resistance of the clamps, remove the right one.
3. . and the left trim of the rear seat mounting
4. Remove the right bolt.
5. . and left rear seat anchors.
6. Slide the front seat all the way back
7. Remove the bolts of the left and right front seat mountings.
8. Remove the seat from the vehicle interior.
9. Install the front seat and all removed parts in the reverse order of removal.
You will need: keys “10”, “12”
1. Pull up the front edge of the rear seat cushion.
2. . and disconnect the mounting brackets on the cushion.
3. . from the front clamps on the body.
4. Slide the cushion forward and up, release the rear latches and remove the rear seat cushion from the vehicle interior.
5. Remove the rear seat back head restraints.
6. Remove the bolt of the lower fastening of the left side element of the seat back.
7. Slide the side element up and remove it.
8. Similarly, remove the right side element of the rear seat back.
9. Remove the bolt...
10. . and remove the two washers on the left side securing the left side of the backrest to the body.
11. Remove the bolt securing the hinge bracket to the armrest of the left side of the rear seat back.
12. Remove the left side of the rear seat back.
13. Similarly, remove the right side of the rear seat back.
14. If necessary, remove the two mounting bolts.
15. . and remove the left rear seat cushion retainer bracket.
16. Similarly, remove the right bracket for the rear seat cushion clamps.
17. If necessary, remove the two mounting bolts.
18. . and remove the rear seat back double hinge.
19. Install the rear seat and all removed parts in the reverse order of removal.
Why remove the rear seat on a Toyota Corolla
In most cases, car repairs take a long time. In fact, replacing a worn/broken part does not take long. How to remove the rear seats in a 2001 Toyota Corolla. 120body The master spends even more time getting to the right part. This process is quite labor-intensive, especially when it comes to replacing a part located under the passenger compartment.
Removing the rear seat of a Toyota Corolla | Video instruction
They also need to be disposed of during work. Otherwise, nothing good will come of it, because airbags are very sensitive to various mechanical influences. A small blow and you will have to visit the nearest store with spare parts for your Corolla or Axio.
Below is a list of activities that need to be carried out to remove the airbag: This must be done carefully so that you do not have to repair it later.
The process of removing the seat back of a Toyota Corolla is described above.
Please note that this is done in exactly the same sequence as dismantling the head restraints from left to right. Installing seats The process of installing seats is exactly the same as the dismantling process, only the sequence of actions is reversed.
At the bottom of the work, you still need to remember to remove the headrests from under the lock and install them in place. In this case, there are no various types of latches. You will have to pick up a wrench and unscrew the 4 nuts. There is very little left to do - unscrew the seat belts, which are also secured with nuts, and remove the backrest from the passenger compartment. Please note that you must first unclip all the pins on which and how to remove the rear seats of a Toyota Corolla shelf; After removing the shelf from the car interior, a feature will immediately catch your eye.
Seat installation
The process of installing seats is exactly the same as the process of dismantling, only the sequence of actions is reversed. Everything is done carefully, without haste or fuss, especially when working with a pillow/pillows. At the end of the work, do not forget to remove the headrests from under the lock and install them in place.
