Raise the ground clearance of a Toyota Corolla year of manufacture. technical characteristics of Toyota Corolla, photos, videos, price of the new Toyota Corolla

Prices

Successful sales and fanaticism brought a huge number of cars to the market.
When looking around, do not cling to a specific option, there are many cars. The average price on the secondary market is 330,000 rubles, there are versions more expensive than 400,000 rubles, but not everyone is ready to pay that much. To make the case for cheap servicing, here are the prices of some good quality aftermarket parts:

• oil pump – 1,900 rubles;
• chain tensioner – RUB 3,300;
• timing kit – 8,000 rubles;
• ball joint - 800 rub.;
• front lever – 3,000 rubles;
• rack support – RUB 1,900;
• rear silent block – 700 rub.;
• front shock absorber - 3,000 rubles.

The model has indeed lost a little of its former reliability; it is no longer such a “tank”. Nevertheless, compared to its competitors, it still remains one; you are unlikely to find a car of these ready-made models in such a budget, which breaks down so rarely and is so cheap to maintain. If you manage to find a Toyota Corolla E120 with a mileage of about 200 thousand kilometers, you will most likely drive another 150,000 without any special interventions.

Kinds

Toyota corolla axio restyling 2008, sedan, 1st generation, e140 (10.2008 - 04.2012) - technical characteristics and equipment
The Toyota Corolla is equipped with several types of air suspension:

1. Lade - constant and the lowest ground clearance;
2. Offroad and Straken – automatic and adjustable;
3. X'tra is the permanent and largest DP.

To maintain the required distance above the road, cars with such a suspension are equipped with a special height sensor that reads the distance between the body and the axles. When the clearance changes, the automation increases or decreases the pressure in the suspension, bringing it to the desired value.

The advantages of such a suspension are as follows:

• Increased load capacity;
• The car feels more confident when cornering;
• When braking, force adjustment takes into account the load on the wheels;
• If used correctly it will last a long time.

The very first European E110 models had a height from the road of 150 millimeters, which caused a lot of discontent among our compatriots. And insufficient rigidity reduced this parameter by about two centimeters, which led to rapid wear of all the node systems that were located under the bottom. Therefore, models with a stiffer suspension were specially produced for our market. Subsequent generations in the 120 body, which began to be produced from 2000 to 2007, had a clearance of 16 centimeters.

The decrease in ground clearance on the latest models to 15 centimeters is explained by the large windage, which leads to poor vehicle handling.

The version in the E150 body had a different size of the parameter in question, it differed depending on the engine:

• 1.8 liter engines had 14.7 centimeters;
• 1.6 and 1.3 had 15 centimeters.

The height of 15 centimeters also remained on modifications of the Corolla in the E170 body.

Options

Toyota Camry trunk volume in liters

In the 2011 Toyota Corolla car market, three trim levels were offered:

• “CE” – base;
• “LE” – comfort;
• “S” – sport.

The initial configuration of “CE” included a mandatory set of functions and technical characteristics. The protection of the driver and fellow travelers was guaranteed by the operation of the following systems:

• traction adjustments;
• ABS;
• checking tire pressure;
• focusing braking force;
• exchange rate stability;
• emergency brake.

The novelty of the appearance of the “steel beauty” was visible thanks to:

• increasing mirrors;
• installation of 15-inch disks;
• block headlights with new dispersion;
• daytime running lights;
• door handles and radiator grille;
• updated color.

The salon was characterized by:

• fabric material of chairs;
• leather-trimmed steering wheel and gearshift lever;
• heating and cooling systems;
• audio system with 4 speakers;
• the ability to fold down the seats.

The “LE” package has been supplemented with:

• heated exterior mirrors;
• sound system with 6 speakers;
• lock control function;
• electric windows;
• main lock with automatic locking.

The “S” package was equipped with:

• 16-inch wheels;
• sports-style panels;
• halogen block headlights;
• combined fog lights.

Options and prices

Toyota auris 2012, station wagon, 2nd generation, e180 (09.2012 - 06.2015) - technical specifications and equipment

More expensive configurations received the following differences:

• The Classic version is distinguished by a heated multi-steering wheel and leather braid, a heated wiper zone, basic audio with 6 speakers, 16-inch wheels and a CVT as an option;
• Comfort – model with 6 airbags, 2 climate control zones, rearview camera, 8-inch multimedia system display and 7-inch information display, exterior folding mirrors and interior dimming;
• The Prestige package received LED optics, engine start with a button, a wireless charger and heating of the second row, 17-inch wheels, front and rear parking sensors.

On the Ukrainian market, the 2021 Corolla can be purchased for an amount starting from UAH 485 thousand. (basic version of City). The Live and Active versions, which are average in terms of the number of options, cost 520-580 thousand UAH. For the maximum configuration of a Japanese car, Corolla Style, you will have to pay 682 thousand.

Table 1. Russian versions of cars.

E150 2012: exterior, interior and technical specifications

Toyota Corolla 2015 technical specifications, configurations and prices
The photo shows the Toyota Corolla 2012 model in the E150 body.

The appearance of this car after restyling in 2010 is distinguished by an improved shape of the front bumper, an updated radiator grille and a modified configuration of the front and rear headlights. And 16-inch alloy wheels complete the exterior.

The interior of the car is spacious with plenty of room for tall passengers, the front and rear row seats are comfortable and have plenty of front legroom. In the photo you can see the updated interior of the car.

The ergonomics of the control panel and white instrument lighting help the driver to better navigate. The lack of high-quality lateral support may cause some discomfort, but only when traveling long distances. Depending on the configuration, the interior is equipped with air conditioning or 2-zone climate control.

High-quality materials were used in the interior decoration, but in 2012, Toyota's closest competitors already released updates using high-quality materials. Technical characteristics of the 2012 Corolla cars in the E150 body did not have significant differences from previous models:

• gasoline engines, volume 1.3 and 1.6 liters; • 6-speed manual transmission or 4-speed automatic transmission; • front suspension — independent, spring (MacPherson struts); rear - spring, semi-independent; • brakes - disc, on the front wheel pair - ventilated.

Technical characteristics of the 10th generation Corolla

Toyota gt 86 2.0 at luxury (09.2012 - 08.2016) - technical specifications

Known for its high-quality engines, Toyota has equipped the 2008 Corolla with six types of engines. All but one use gasoline as fuel. Each of the engines below had 4 in-line cylinders.

1. The first of the presented engines had a volume of 1.3 liters. Its maximum power is 101 hp. with a peak torque of 132 N/m. Gasoline consumption is approximately 5.8 liters.
2. The second engine has a volume of 0.1 liters more, but the power figures have dropped to 97 hp. (130 N/m). Fuel consumption in this case is at the level of 6.9 liters.
3. Next comes a 1.5-liter engine, the power of which is already 110 (140 N/m). The remaining two gasoline engines received a volume of 1.6 and 1.8 liters with a corresponding power of 124 hp. (157 N/m) and 132 hp (174 N/m). All three of these engines consume about 7.2 liters of gasoline.
4. The only diesel engine was produced with a volume of 2 liters and produced power at the level of 126 hp, reaching 300 N/m of torque. The fuel consumption of this engine is 5.3 liters.

Photo of Toyota Corolla 2012 sedan

Engine characteristics:

The same wide choice was provided to consumers in the field of transmission equipment. The Toyota Corolla could be equipped with a six-speed manual, four-speed automatic or CVT. The latter type of transmission improves the quality of gear shifting (the process becomes smoother), thereby increasing the level of comfort while driving on the road.

The vehicle weighs approximately 1.3 tons, depending on the type of equipment selected.

The body is made in such a way as to soften side and frontal impacts. This was ultimately noted by numerous crash tests, which gave the Toyota Corolla the highest score in this indicator.

Toyota Corolla engines

How many liters is the volume of the Toyota Corolla tank, the volume of the Toyota Corolla gas tank
1.33 1NR-FE Dual VVT-i 99 hp.

The basic small-displacement engine of the NR series dates back to 2008. The engine is equipped with an aluminum liner cylinder block, a distributed injection system, phase shifters on both shafts (Dual VVT-i), an electronically controlled throttle valve (ETCS), a crankshaft with 4 counterweights (the axis is shifted by 8 mm relative to the cylinder axis), hydraulic compensators for correcting gaps in the valve mechanism, timing chain drive, EGR (exhaust gas recirculation) system with valve drive from a stepper motor.

1.6 1ZR-FE Dual VVT-i 122 hp

The engine was first introduced in 2007. Design features - aluminum block, 16-valve timing (DOHC), valve timing control on both shafts (Dual VVT-i), hydraulic compensators, distributed injection. The Valvematic system (valve lift control) is not provided for engines installed on Russian versions of the sedan.

1.8 2ZR-FE Dual VVT-i 140 hp

And the 2ZR-FE is structurally similar to the 1ZR-FE with all the ensuing pros and cons. The main difference from its “younger” brother is a different crankshaft and a piston with a stroke increased to 88.33 mm. In terms of traction characteristics, the 1.8-liter unit is only slightly superior to its partner in the engine range.

How to lift the front of a Toyota Corolla yourself?

The front suspension of all Toyota Corolla models is represented by classic MacPherson struts and can be improved in order to increase ground clearance.

Most often, the front of the car is raised using aluminum spacers. You can purchase a set of them specifically for the Corolla, and if they are unavailable, use aluminum ones designed for the VAZ 2108. They are ideal in size, and their bolts are shaped and threaded to fit the Toyota Corolla.

The thickness of the spacers for the front suspension should be 18-20 mm. If you choose these thicker parts, there is a risk that the right actuator will come into contact with the lever, and the left one will hang at a large angle. In addition, the camber of the wheels will change significantly with a higher rise.

Installing spacers is not difficult; all stages of this work can be completed independently:

1. remove the front struts;
2. be sure to tighten the springs;
3. loosen the central nut and disassemble the stand (remove the upper bowl);
4. we knock out the bolts that secure the rack to the body and install new ones from the kit with spacers in their place;
5. assembling the stand;
6. after assembly, install a spacer on top; if the spacer does not fit tightly, adjust its shape using a file;
7. install the stand in place.

To increase ground clearance, in addition to installing spacers, you can also replace the front struts and front suspension springs. For these purposes, you can use spare parts from the following Corollas: all-wheel drive models with a 104 body, diesel modifications or cars with a 4A-GE engine.

Exterior of Corolla 2010-2012

The appearance is attractive due to its rounded and smooth shapes. And solidity is given by modern optics and powerful bumpers. There are several features of the restyled model; the main differences from its predecessor can be identified:

• The radiator grille is divided into two halves, with the Toyota emblem in the middle.
• The front bumper has been changed, the size of the air intake has been increased.
• The car received new rear-view mirrors, they became elongated and turn signal repeaters were installed on them.
• In rich trim levels, updated R16 wheels with a pattern were installed.
• The taillights have a futuristic appearance, with transparent elements in the central part.
• The trunk lid has also changed, now it is divided into two halves by a chrome molding.

The restyled version of the Toyota Corolla 2010-12 fully corresponds in size to the C-class:

• Length – 4545 mm.
• Height – 1470 mm.
• Width – 1760 mm.
• Wheelbase – 2600 mm.
• Ground clearance – 150 mm.

Weight ranges from 1300-1380 kg, depending on the configuration.

Body and interior

With the onset of cold weather and especially in winter, the owner’s ardor was sometimes cooled by drops of water from under the ceiling lamp. They appeared when the interior was warming up after a long stay in the cold. The reason is a poorly designed structure between the ceiling and the roof, as well as insufficient measures to prevent the formation of condensation. Perhaps this was also facilitated by poor sizing of the windshield, since the defect also surfaced after visiting the car wash. Car repair shops dealt with the defect by gluing the roof with noise insulation.

The interior finishing materials used are not the best. When the temperature drops (especially in winter), hard plastic begins to creak and rattle on uneven roads. Most often the front panel and rear shelf make noise. The problem is solved by gluing with soundproofing materials. The radio was also disappointing; already in the first year of operation, its glass became cloudy. Defective devices were replaced under warranty.

The creaking or “clicking” of the driver’s seat also adds to the discomfort. Sounds occur during boarding and disembarking, as well as during sudden starts and stops. Dealers accepted the comments with reluctance. The problem disappeared after completely replacing the chair with a new one. Apparently the manufacturer knew about the defects, but already mired in recall campaigns, was in no hurry to treat the problems that required multimillion-dollar expenses. In addition, there have been cases of failure of the driver's seat heating system, the cause of which was the failure of the heating elements inside the seat.

The sound insulation of the cabin is good, but when the engine revs above 3000 rpm, the buzzing of the engine begins to penetrate.

The plastic used for the exterior decoration is quite easily deformed when exposed to unfavorable external conditions: the front mudguards bend, with further separation, as well as the trunk lid trim above the license plate. There have been several cases of spontaneous cracking of the rear light.

Technical parameters of the 1NZ-FE 1.5 l engine.

Diesel engine 1ND-TV

The 1ND-TV engine is considered one of the best small diesel engines in the world. It is practically free of design flaws and at the same time is easy to repair. It belongs to the third wave of power units developed by engineers of the Toyota Motor Corporation concern in the second half of the 90s of the last century.

The 1ND-TV engine was based on a liner cylinder block with an open cooling jacket, made of light alloy materials. This engine is equipped with a VGT turbine and a SOHC gas distribution mechanism with two valves per cylinder.

This solution made it possible to rid the engine of a number of problems typical of diesel power units. However, subsequently (2005) Bosch injectors were replaced by more modern Denso, and even later - by piezoelectric type injectors. In addition, in 2008, a particulate filter began to be installed on the engine. Unfortunately, all these innovations had a negative impact on the reliability and durability of this power unit.

Dimensions and weights of Toyota Corolla 2010, sedan, 10th generation, restyling, E150

Fuel tank capacity for Toyota Corolla

The autonomy of a vehicle directly depends on the size of the fuel tank. The Corolla concept involves using the car for traveling long distances, as a result of which the car received a large tank - all E150 trim levels have a 55-liter tank.

The rigidity of the body was increased, which increased the weight of the car. The weight of the Toyota Corolla of the year of manufacture is almost 1.3 tons, taking into account the internal equipment and in various trim levels.

Rigidity made it possible to increase the safety of the car, this was facilitated by the use of high-strength steel.

Dimensions of the Toyota Corolla The dimensions of the tenth generation sedan were slightly increased in contrast to the previous model E. The wheelbase of the Toyota Corolla is 2.6 m. With the increase in the size of the car, the trunk volume also increased to liters. The size of the interior of the Corolla in the back If necessary, the ground clearance of the Toyota Corolla can be raised by using spacers for the shock absorbers. The ride height will increase, but the car will no longer be stable when driving at high speed and will lose maneuverability.

Toyota Corolla 2008 tank capacity

You can reduce the ground clearance by replacing the factory shock absorbers with tuning ones. In this case, the car will become more controllable.

Black Corolla on huge wheels. Restyling of the Corolla E this year has made the car the safest for drivers, passengers and pedestrians.

Toyota Corolla 150 technical characteristics: ground clearance, consumption, trunk volume

This is confirmed by crash tests. The machine is equipped with active and passive safety systems.

Fuel consumption Fuel tank volume of Toyota Corolla Most gasoline versions of the car use AI fuel, previous generations also use m. Diesel cars consume 4.4 liters, 7 liters and 5.3 liters, respectively.

These parameters are typical for a Corolla with a manual transmission. Capacity volume and amount of fuel Many car enthusiasts do not know that the volume of the gas tank declared by the car manufacturer does not correspond to the amount of gasoline that can be poured to operate the engine. There is a so-called minimum reserve of fuel, which always remains in the Toyota Corolla tank and does not enter the fuel system.

Usually this is about 5-7 liters. This amount of fuel takes up about one centimeter of tank height; how many liters of a Toyota Corolla 2008 tank cannot be pumped normally by a fuel pump. Thus, a maximum of 50 liters will be poured into the Toyota Corolla gas tank, which naturally provokes doubts about the declared capacity. Another factor influencing the amount of fuel that can be filled into the tank is the need for a strictly horizontal position of the car.

Any deviation reduces the maximum volume, since an air plug appears at the top of the container.

Fuel tank volume The Toyota Corolla E is no exception. There were design solutions of Keen Look and Under Priory, which attracted more attention regarding the upper grille of the car. And all this together made the car look much more prestigious. Fuel tank volume of the Toyota Corolla If you answer the question, how many liters is the tank of the Toyota Corolla, then each driver has the opportunity to choose a model with a 1.33 liter, 1.6 liter and 1.8 liter engine.

Regarding the tank itself, drivers disagree here. According to the car's passport, the tank of a Toyota Corolla should hold 55 liters.

But in actual use, some drivers claim that they only have 48 liters at the gas station. And there seems to be as much as 7 liters left for reserve.

Moreover, in the latest Toyota Corolla models, the fuel tank volume has been increased to 60 liters. Models that were released this year and earlier have a fuel tank capacity of only 50 liters. But there are also differences here.

Some claim that their tank can only be filled to 46 liters.

Fuel consumption

Consumption per 100 km with the smallest engine is 4.9 l, 7.3 l and 5.8 l in suburban, urban and mixed modes, for 4ZZ-FE - 5.7 l, 8.6 l, 6.7 l , respectively, for 1ZR-FE - 5.8 l, 8.9 l, 6.9 l, for 2ZR-FE - 6 l, 9.3 l, 7.2 l, the modification with a diesel unit consumes 4.4 l , 7 l, 5.3 l of fuel in similar conditions. The given technical characteristics refer to modifications equipped with a manual transmission.

A car with a 1ZR-FE engine and automatic transmission consumes 6 liters, 9.3 liters, 7.2 liters per 100 km in suburban, urban, and mixed cycles.

As you can see and would expect, the diesel engine is the most economical. Toyota Corolla modifications with 1.8 liter and 1.6 liter engines complete with automatic transmission require the most fuel costs.

The tank volume is 55 l. For most modifications of the car in question, equipped with gasoline engines, the manufacturer recommends using AI-95 fuel, however, some of them, developed for the previous generation, can be refueled with AI-92.

E170 E180 2013

Swift red Corolla E170/160 American
The 11th generation Corolla has received significant changes in the appearance of the body. There is an air intake on the lower front part. The optics system uses LEDs, and switching between low and high beams is carried out thanks to double lenses. The new Corolla is equipped with a modified instrument panel, an improved interior climate control system and a navigation system. The transmission received a sixth stage for mechanical variations. The automatic transmission is represented by a continuously variable CVT Multidrive S. Under the hood you can find a 1.6-liter engine with a capacity of up to 122 horses, as well as a 1.3-liter engine that develops power up to 99 hp.

Corolla E180 looks great

In the American market, car models with E170 bodies are equipped with 1.8-liter 2ZR-FE engines.

Engine characteristics

The engines offered for the Russian and Ukrainian automobile markets are not distinguished by high power values. On the other hand, their efficiency, combined with a properly selected transmission, low vehicle weight and 15- or 16-inch wheels, makes them quite worthy compared to analogues from other manufacturers of the same 2012 year.

So, the technical characteristics of the engines are as follows: the first, youngest, with a volume of 1.3 liters is capable of developing a power of 101 hp. With. with fuel efficiency of less than 6 liters per hundred kilometers when driving in the combined cycle. More powerful, with a volume of 1.6 liters, slightly stronger - 124 liters. With. Accordingly, its fuel consumption increases to 7 liters during the combined cycle.

Toyota Avensis T250 2003-2009

Technical characteristics of the Toyota Land Cruiser Prado Toyota Land Cruiser Prado 2.7 AT 163 hp 4WD

Avensis T250 dorestayl

Assembly of the second generation Avensis (code T250) started in 2003. Body options remain. Restyling took place in 2006, the model was produced until October 2009. The dimensions of the second generation Avensis have increased, and the ground clearance has decreased by 5 mm.

Engines and transmissions

The line of power plants was represented by four gasoline and four diesel internal combustion engines. Diesel engines were not officially supplied to Russia. The Avensis T250 transmission options are five- and six-speed manual, four- and five-speed automatic. All versions of the car have front-wheel drive.

Avensis T250 after update

Avensis options for Europe:

• 1.8, petrol, manual or automatic transmission;
• 2.0, diesel, manual transmission;
• 2.4, petrol, automatic transmission.

Pre-styling versions for the Russian market (gasoline units only):

• 1.8 manual and automatic transmission;
• 2.0 manual and automatic;
• 2.4 and automatic transmission.

1.8 1ZZ-FE manual

Main characteristics of 1ZZ-FE:

• return - 129 hp;
• moment – ​​170 N*m;
• compression ratio – 10;
• fuel – AI-95;
• average consumption – 7.2 l.

Station wagon Avensis T250 after update

1.8 1ZZ-FE automatic

The parameters of the same installation in tandem with automatic transmission have been preserved. The differences are as follows:

• acceleration to hundreds – 11.6 s (versus 10.3)
• speed – 195 km/h (200);
• consumption – mixed cycle (7.7).

2.0 1AZ-FSE manual

Characteristics of 1AZ-FSE:

• power – 147 hp;
• torque – 196 N*m;
• compression ratio – 11;
• fuel - AI-95;
• average consumption - 8.1.

2.0 1AZ-FSE automatic

The main indicators of the power plant are similar to those presented above. Acceleration is carried out in 11.1 s, consumption is 9.2 liters per 100 km, maximum speed is 205 km/h. The automatic transmission loses a little in terms of dynamics and consumes more fuel.

2.4 2AZ-FSE automatic

Engine performance marked 2AZ-FSE:

• exact volume – 2362 cubic meters. cm;
• return – 163 hp;
• torque – 230 N*m;
• compression ratio – 11;
• fuel consumption – 9.2 in the combined cycle.

2.0 1CD-FTV diesel manual

The installation characteristics are as follows:

• power – 116 hp;
• moment – ​​280 N*m;
• compression ratio - 17.4;
• average fuel consumption is 5.8 liters.

Toyota Avensis feed

Dimensions and volumes

Avensis T250 has become larger than its predecessor. Sedan dimensions:

• body dimensions – length (4630), width (1760), height (1480);
• wheelbase – 2700;
• 60 l tank;
• luggage compartment volume – 520 l;
• ground clearance - 155 mm;
• weight – 1245 kg.

Liftback parameters:

• dimensions – length (4630), width (1760), height (1480);
• base – 2700;
• tank – 60 l;
• luggage compartment volume – 510 l (1320);
• ground clearance - 155 mm;
• weight – 1320 kg.

Avensis T250 - second generation

Station wagon characteristics:

• dimensions – length (4700), width (1760), height (1525);
• base – 2700;
• tank – 60 l;
• luggage compartment volume – 520 l;
• ground clearance - 155 mm;
• weight – 1295 kg.

Chassis

The Avensis suspension is represented by a MacPherson strut, double wishbones and stabilizers. The brake mechanism is disc, and the front one is ventilated.

Protection of the driver and passengers

The basic equipment of the Avensis included driver and passenger airbags (with deactivation function), a side airbag and curtains. There was also a cushion for the driver's knees. Mounting for child seats and an additional brake light are constant attributes. The buyer also received ABS, EBD, ESP (electronic stability control) and TCS (traction control) systems. The top variant adds BAS (additional braking system) and cruise control.

Avensis T220 and Avensis T250

Restyling 2006

External changes in the new version of Avensis affected:

• front bumper;
• false radiator grille;
• fog lights;
• headlights;
• rear lights (transparent inserts appeared);
• turn signals (moved to the side mirrors, a D-CAT nameplate appeared on the wings).

2.2 2AD-FHV diesel manual

At the end of 2008, beginning of 2009, a special version with a 2.2-liter internal combustion engine was produced. Technical characteristics of the unit with common-rail direct injection:

• power – 177 hp at 3600 rpm;
• torque – 400 N*m at 2000 rpm;
• compression ratio - 16.8;
• average consumption values ​​are 6.1 l.

Avensis T220 and Avensis T270

Toyota Corolla 150 technical characteristics: ground clearance, consumption, trunk volume

The development principle of the automotive industry is regular engineering improvement and full satisfaction of consumer requirements. The Japanese concern Toyota has followed this rule for more than one generation of cars. Toyota Corolla in the 150 body is no exception. The technical characteristics of the Toyota Corolla 2008 allowed the car to become a sales leader in the world market. The Toyota Corolla E150 took a strong position. The popular sedan was released in 2006 to mark its fortieth anniversary. In terms of technical equipment, the Corolla in the 150th body was very different from its predecessors.

The 2007 Toyota Corolla has been in great demand since its launch; car enthusiasts prefer this car, which has reliability, safety and a good set of technical characteristics.

Toyota designers and engineers care about car drivers. The car is equipped with everything necessary to ensure that trips at any time of the year remain comfortable and enjoyable.

To perform basic functions, the passenger car was equipped with 4-cylinder engines with low fuel consumption.

In Russia, Corolla E150 cars were officially sold only with gasoline engines and front-wheel drive. Cars with diesel engines were also supplied to Europe.

The 10th generation Toyota Corolla sedan could officially be purchased with three engines:

• 1.3 l, gasoline 1NR-FE 101 hp, manual transmission, cylinder diameter - 7.25 cm, piston stroke - 8 cm, compression ratio - 11.5 to 1, maximum torque - 132 Nm;
• 1.4 l, gasoline 4ZZ-FE 97 horsepower, manual transmission, cylinder diameter - 7.9 cm, piston stroke - 7.1 cm, compression ratio as in the 1.3-liter modification, maximum torque value - 130 Nm. ;
• 1.6 l, gasoline, 1ZR-FE 124 horses, manual transmission, automatic transmission or robot, cylinder diameter - 8 cm, piston stroke - 7.8 cm, compression ratio - 10.2 to one, maximum torque - 157 Nm.

After restyling in 2010, only two engines remained: 1.3 and 1.6 liters. Models with both types of engines show good efficiency: 6-7 liters of consumption per hundred kilometers.

Ways to enlarge

In order to change the standard ground clearance on a Toyota Corolla, some car owners install special spacers and change the chassis elements, this allows the body to be raised slightly. There are models on which a special suspension is installed, which is called air suspension, in which, thanks to special elastic pneumatic elements, you can adjust the distance between the road and the body. This eliminates the need to increase ground clearance by installing special spacers and modifying the suspension. Special reinforced racks are also installed, which add rigidity and increase ground clearance by up to 2 centimeters.

Installing spacers

In order to install special attachments, you need to do the following:

1. We prepare all the necessary tools;
2. Use a jack to lift the rear beam and remove the wheels;
3. The rear seats fold down. The casing is moved to the side;
4. The lower fastening at the rack is unscrewed;
5. The upper mounting nut of the shock absorber is unscrewed;
6. The fasteners are unscrewed from the trunk side;
7. The stand is removed and the springs are clamped with a vice or using special pullers;
8. The rod of the shock absorber is unscrewed, after which the strut is disassembled;
9. A spacer is installed;
10. The rack is being assembled and installed.

Installation in the front of the car is carried out in a similar way.

There are several types of air suspension installed on the Toyota Corolla:

1. Lade - constant and the lowest ground clearance;
2. Offroad and Straken – automatic and adjustable;
3. X'tra is the permanent and largest DP.

To maintain the required distance above the road, cars with such a suspension are equipped with a special height sensor that reads the distance between the body and the axles. When the clearance changes, the automation increases or decreases the pressure in the suspension, bringing it to the desired value.

The advantages of such a suspension are as follows:

• Increased load capacity;
• The car feels more confident when cornering;
• When braking, force adjustment takes into account the load on the wheels;
• If used correctly it will last a long time.

The very first European E110 models had a height from the road of 150 millimeters, which caused a lot of discontent among our compatriots. And insufficient rigidity reduced this parameter by about two centimeters, which led to rapid wear of all the node systems that were located under the bottom. Therefore, models with a stiffer suspension were specially produced for our market. Subsequent generations in the 120 body, which began to be produced from 2000 to 2007, had a clearance of 16 centimeters.

The version in the E150 body had a different size of the parameter in question, it differed depending on the engine:

• 1.8 liter engines had 14.7 centimeters;
• 1.6 and 1.3 had 15 centimeters.

The height of 15 centimeters also remained on modifications of the Corolla in the E170 body.

Increasing ground clearance (methods and spacers)

Spacers to increase vehicle clearance.

Many car enthusiasts dream of increasing the ground clearance of their car. Therefore, they are looking for ways to do this. The most optimal way is to install spacers under the springs. The cost of these products is not high and ranges from only 600 to 2000 rubles per set.

Let's consider the sequence of actions for installing spacers on a Toyota Corolla for the rear of the car:

1. First, let's collect the necessary tools.
2. We jack up the rear beam for ease of operation. We are dismantling the rear wheels.
3. We fold the rear seats, remove the clips of the trim, and move it aside.
4. Unscrew the lower rack mount.
5. Unscrew the upper shock absorber mounting nuts.
6. Now you also need to unscrew the fasteners from the luggage compartment side.
7. We remove the rack assembly from the car.
8. Unscrew the rod mount.
9. We disassemble the shock absorber.
10. We install a spacer under the upper spring mounting cap and assemble the strut.
11. We install the rack assembly on the car.
12. Installation of spacers on the front suspension is carried out similarly to the rear.

It will become something like this!

Reinforced racks

Also, to increase the ground clearance, you can install reinforced struts, which add 15-20 mm to the ground clearance. As practice shows, they quickly sag to the standard size.

What is the ground clearance of Toyota Verso?

In the article, the reader will find answers to questions about what is the ground clearance of a Toyota Verso and what is the ground clearance of this vehicle. How to measure ground clearance when buying a car so as not to be deceived and why ground clearance is needed.

The Japanese manufacturer Toyota does not provide passenger cars with self-adjusting suspension. Therefore, the Toyota Verso has low ground clearance and is not suitable for traveling on dirt roads and rocky areas if the car is loaded.

This does not mean that in this case you do not need to pay attention to the characteristics of the Toyota Verso vehicle, including ground clearance. High ground clearance will help you park close to the curbs.

Suspension

The basic technical characteristics of the 10th generation Corolla are of a high level, including the suspension. The front struts are MacPheron, the rear axle uses a torsion beam. The simple design guarantees comfort, reliability and durability on roads that are not in perfect condition. The technical parameters of the suspension add acceptable maneuverability to the Corolla sedan, as evidenced by numerous positive reviews from car owners.

Toyota Corolla cars, released in 2011, stood out from previous generations with a modified body, updated interior and semi-independent suspension. The front is an L-link MacPheron strut, but with an anti-roll bar installed. At the rear there was a beam with a device for absorbing unevenness on the roads. The suspension of this car model is considered the most durable and can withstand more than hundreds of thousands of kilometers without expensive repairs.

The technical characteristics of the 2011 Toyota Corolla, combined with its high ground clearance (150mm), ensure a comfortable ride on bumpy roads.

Increasing ground clearance (methods and spacers)

Spacers to increase vehicle clearance.

Many car enthusiasts dream of increasing the ground clearance of their car. Therefore, they are looking for ways to do this. The most optimal way is to install spacers under the springs. The cost of these products is not high and ranges from only 600 to 2000 rubles per set.

1. First, let's collect the necessary tools.
   Necessary tools.
2. We jack up the rear beam for ease of operation.
   We are dismantling the rear wheels. Raise the rear of the car.
3. We fold the rear seats, remove the clips of the trim, and move it aside.
   Move aside the luggage compartment cover.
4. Unscrew the lower rack mount.
   Remove the lower shock absorber mount.
5. Unscrew the upper shock absorber mounting nuts.
   Unscrew the top fastenings of the rack.
6. Now you also need to unscrew the fasteners from the luggage compartment side.
   Unscrew the fasteners located in the car body.
7. We remove the rack assembly from the car.
   We compress the spring with a special vice.
8. Unscrew the rod mount.
   Unscrew the shock absorber rod.
9. We disassemble the shock absorber.
   We install the spacer in the indicated place.
10. We install a spacer under the upper spring mounting cap and assemble the strut.
    We install the spacer in the indicated place.
11. We install the rack assembly on the car.
12. Installation of spacers on the front suspension is carried out similarly to the rear.

Lowest Toyota in Japan

In the homeland of Toyota, there is the lowest sedan, based on the Crown Majesta. In the Land of the Rising Sun, it is generally very fashionable among young people to undervalue cars of various makes and models. But it was the above option that exceeded all expectations.

Despite the ground clearance of just a couple of centimeters, this car feels quite confident on Japanese roads. Its owner can easily ride it on public roads and does not experience discomfort. He only collects curious glances and periodically answers questions from people interested in the car. True, they do not always manage to reach the driver, since the windows in the sedan are completely tinted.

The tuning was installed on the first generation Crown Majesta, which was produced from 1991 to 1995. The car was created as a representative business class. This model later gave rise to the Lexus GS and Lexus LS400 sedans.

Characteristics of Toyota Corolla 2019

The new TNGA C platform with extensive use of high-strength steel has improved the torsional rigidity of the body by as much as 60%. Japanese engineers revised the geometry of the MacPherson front suspension by changing the position of the anti-roll bar. The rear multi-link suspension has also undergone major modernization, in particular, new shock absorbers and springs have appeared, and the mounting location of the lower arm has changed (to improve the angle of inclination during high-speed maneuvering). As a result, it was possible to reduce the center of gravity of the entire car by 20 mm.

Serious work has been done to modernize engines and gearboxes. In particular, the 2-liter M20A-FKS gasoline engine received a new D-4S direct fuel injection system. It was possible to increase the valve lift height due to camshafts of a different shape and use a new VVT-iE variable valve timing system with an electric drive. The compression ratio was raised to 13:1, and the cooling jacket and oil system were optimized. The combustion rate of the working mixture has increased due to the optimal supply of air flow. The shape of the piston bottoms has changed, and to reduce friction between the piston and the surface of the cylinders, oil nozzles have appeared (3 for each cylinder). As a result, the engine became more powerful and economical. And the widespread use of light alloys made its total weight less than the weight of the 1.8 liter naturally aspirated engine of the previous generation.

Transmission

As for the transmission, the front-wheel drive Toyota Corolla of the new generation will delight you with an optimized 6-speed EG60 manual transmission. The designers managed to make the unit more compact and reduce the weight of the box by almost 7 kilograms.

The newest automatic transmission will be a continuously variable variator Dynamic-Shift CVT (K120). The box received a sports mode and a manual control mode. Essentially, this variator has 10 virtual gears due to an increase in the range of gear ratios. The design will include a special gearbox that will allow you to instantly accelerate the car, eliminating such a disadvantage as “lethargy” when starting from a standstill. The manufacturer managed to reduce the size of the main components of the variator - the belt and pulley. In addition, the speed of movement of the pulleys and belt relative to each other is now 20 percent higher.

You can also point out the incredible number of electronic assistants that help keep the car in the lane, automatically brake in front of an obstacle and recognize road signs. But this whole description will have to be devoted to another article.

Dimensions, volume, ground clearance Corolla 2019

• Length – 4658 mm
• Width – 1790 mm
• Height – 1440 mm
• Curb weight – from 1220 kg
• Gross weight – 1730 kg
• Wheelbase – 2700 mm
• Trunk volume – 450 liters
• Fuel tank volume – 55 liters
• Tire size – 195/65 R15, 205/55 R16
• Ground clearance – 145 mm

Technical properties of the machine

Toyota Corolla 2008 fuel tank capacity

In addition to the appearance and interior, the technical characteristics and dimensions of the Toyota Corolla 2014 have been significantly changed.

This machine was equipped with engines that were different from each other:

• 1.3 liter;
• 1.6-liter;
• 1.8 liter.

Separately, it is worth noting the suspension and how the car behaves in operation. It’s not for nothing that engineers spent a long time developing a modern suspension for the new Toyota Corolla 2014 model.

The progress of the machine can be seen in the video review:

Soft handling and flexibility in maneuvers were the main characteristics given by drivers driving this car.

Today, Toyota officials offer various configuration options and prices for the 2014 Toyota. If a car enthusiast wants to purchase a new car, there will be no shortage of options for a brand new car.