4894 Apr 20
The process of operating a car involves the occurrence of various types of malfunctions, ranging from engine breakdowns to scratches on the hood of the vehicle. One of the most commonly at risk parts is the rear view mirrors located on the sides of the car. They “suffer” in dense traffic or over time they become cloudy and lose their information content (the same applies to the interior reflective element). Toyota Corolla is equipped with fairly informative mirror elements, but to increase the reflection area, many drivers equip their vehicle with larger “reflectors”.
Removing and replacing side parts
To replace side mirrors on a Corolla 120 and 150 body you will need:
- A flathead screwdriver with a wrapped tip (you can wrap it with tape or tape) - this step will prevent mechanical damage to many parts of the car.
- New reflective elements.
In order to carry out the dismantling process, a number of actions must be performed. First remove the holder for the inside handle of the front doors. To do this, use a screwdriver (which was wrapped in tape or tape) to release three fasteners. Next, using the same screwdriver, you should remove the upper panel of the armrest and disconnect the connector for the heating wires located under it. It is worth noting that everything should be filmed quite well.
The next step is to disassemble the facing panel. To do this, you will need to use a screwdriver to remove the door armrest cover, unscrew two screws, remove 9 clamps and release five more clamps. Only after these steps can you remove the panel located on the inner glass seal. After this, having released two more grips, you should dismantle the door handle located inside the vehicle interior.
The lower frame bracket trim is removed differently on cars with 4 and 6 speakers. For vehicles with 4 speakers, simply release the retainer and clip and remove the part. For cars with 6 speakers, do the same, and also disconnect the wire connector.
The next step is to remove the Toyota side mirror. It is necessary to release the latch, disconnect the connector, and also unscrew the 3 bolts that hold the rear view mirror. It is dismantled along with the cover.
It is important to remember that fasteners should be removed fairly easily.
Next, you need to remove the mirror cloth. It should be noted that the canvas is removed differently on cars with and without heated mirrors. For models that do not have heating, the following scheme is relevant: the lower part of the visor is sealed with protective tape, then you should tilt the part down, by pressing on it from above, unhook the two grips, disconnect the two guides located in the upper part, and remove the mirror. On models with heating, the circuit is similar, but the connectors must be disconnected. And only after these manipulations can you disassemble the mirror on a Toyota Corolla. The new part must be installed in the reverse order.
Search
120 Body Corolla Repair Manager
Quite expensive and labor-intensive tuning with the replacement of the Toyota Corolla 120 control column can be performed either at a service station of Toyota or in your garage with your own hands. But before we get down to “everything complicated,” you need to make sure that the necessary condition for an extraneous knock, hitting the steering wheel and body, is a specific malfunction. steering rack .
In the luggage experience of motorists described in the article, there are simpler repair methods.
Steering rack diagnostics from experienced
Turn off the engine and start pumping from side to side with a swing of about 5-7 cm. If you hear a knock, the reason is in the steering mechanisms. Quite expensive and labor-intensive tuning with replacement of the Toyota Corolla 120 steering column can be performed both at a Toyota service center and on family cars. However, if the knocking sounds like a scrape somewhere very close to the steering wheel, it is an electrical loop sound. How to remove fog lights on Toyota Land Cruiser 200? You shouldn't pay attention to this.
The Toyota Corolla steering wheel includes a steering column, universal joints, and a steering rack with rods and ends. The failure of an individual mechanism is best determined by the method of elimination.
First you need to eliminate the faulty tips as the cause of detonation. You will need a helper here. Stabilizers for Toyota Corolla 150 and 120 bodies. The first step to fixing what I'm doing is to repair the steering rack again. As he carefully turns the steering wheel, you need to alternately grab the tips of your palm. In a faulty large game loop that needs repair, the sound will feel like the palm of your hand.
The steering column itself or the shaft running from it to the rail very rarely fails. The steering rack suffers much more when the mileage is high. Replacement side mirror Toyota Corolla 2002 121 How to remove the cover (protection). In addition, it is very rusty from moisture and salt. This can also lead to premature failure.
Steering wheel lubrication
You may also like
- Subaru Sends BRZ With "Final Edition" Model, Gen 2 Incoming Equivalent "Black Limited" The Toyota GT 86 version in Japan signals the end of the BRZ in that part of the world, and other markets will soon follow suit because Toyota and Subaru are developing the Gen 2 in background. Neither company wants to do business...
- How to disable Lambda Probe VAZ 2110
Catalytic exhaust systems began to be used on VAZ cars with the introduction of Euro-2 and Euro-3 environmental standards, and the VAZ-2110 lambda probe is an integral part of the catalytic converter engines. Oxygen sensor (other on...
Replacing the Additional Brake Light Lamp Renault Logan
Renault Logan Brake Light ReplacementVehicle thefts play an important role in road safety as they are designed to convey information to other road users about the driver's actions. Modern m...
How to change the internal grenade on a VAZ 2109
Hello. This article is about replacing the outer CV joint. (in simple language grenades) VAZ 2109, 2114, 2115 car. At the end of the article there is a detailed video about the replacement. CV connection means a connection of equal angular velocities. Before replacing the external grenade, remove...
Changing the Oil in a Honda Airwave CVT
Pour the original. Today we will make the first piece, a thousand and the second. And you can forget about servicing the CVT for thousands of kilometers. 20 minutes later I'm standing at the cash register and crying. I'm reading comments, rapping, browsing forums. And there are polar thoughts. How,…
Audi installs used lithium-ion batteries from PHEVs in factory vehicles
A second life is great for the environment and the economy. Audi has discovered a second use for lithium-ion batteries previously used in the Audi A3 e-tron and Audi Q7 e-tron hybrids. Used batteries removed from vehicles...
One of the most inexpensive ways to repair a Toyota Corolla steering rack is to repair it without disassembling it. The cabin filter is a replacement for the Toyota Corolla cabin filter, how to replace it. For this operation you need to stock up on an M6 oil nipple with a rubber cap for it and 400 g of mannol oil. I was wanted. I just learned how to sell a Toyota trunk shelf on the steering rack. You also need to select the appropriate drill bit and tap for threading oil fittings.
How to select a rear view element?
As noted earlier, the rear view mirror is the most susceptible to damage. Sometimes there are cases when it is possible to repair a part, but the most common times are when the only solution is to replace the mirror. Currently, you can purchase both the original part and a high-quality replica. Reliability and 100% “compatibility” with the car speak for the original. But the advantages of a replica include its relatively low cost and availability.
So, how to choose a new mirror for a Toyota Corolla 120 and 150 body? Before choosing a new side mirror, you need to decide whether it will be from an official dealer or purchased externally.
Of course, it is better to choose from a dealer, but if this is not possible, then you can turn your attention to “car cambers”.
During the purchasing process, you must adhere to a number of recommendations: you need to decide which drive: mechanical or electric? For example, even if the “original” parts have an electric drive, then it is worth remembering that the control unit on the 2008 and 2012 models is different, and the reflectors from the 2008 model may not fit the 2012 model. When installing the side left and right products, all fasteners should be easy to screw in. The left and right mirrors must be symmetrical. If they have a turn signal, then you should check it before purchasing. The installed element should look like a single whole: there should be no backlash.
Disassemble the side mirror for a Toyota Corolla. How to disassemble the side mirror of a Toyota Corolla
The process of operating a car involves the occurrence of various types of malfunctions, ranging from engine breakdowns to scratches on the hood of the vehicle. One of the most commonly at risk parts is the rear view mirrors located on the sides of the car. They “suffer” in dense traffic or over time they become cloudy and lose their information content (the same applies to the interior reflective element). Toyota Corolla is equipped with fairly informative mirror elements, but to increase the reflection area, many drivers equip their vehicle with larger “reflectors”.
Price
- Right mirror Toyota Corolla 150 body – from 2000 to 5000 thousand rubles.
- Left Toyota Corolla 120 body - from 2000 to 5000 thousand rubles.
- Reflective elements for Toyota Corolla Verso - from 1,500 to 3,500 thousand rubles.
Disassemble the Toyota Camry mirror
Natalya (Benaya) Unique body elements are used. https://vkontakte.ru/club17531083
Camry V40: rear bumper RUB 4,000. front bumper 4000 rub. back door / lion 5000 rub. rear / right door 5000 rub. door for 1 lion 5500 rub. door right / right 5500 rub. back panel 5000 rub. window sill 1500 rub. headrest 1000 rubles center console 2500 rubles.
Camry 01-06: rear door / left RUB 5,500. rear door / right 6000 rub. wing for a lion 2500 rub.
The cost depends on the condition of the spare part. Constant updating of the assortment. Call and ask. 8-921-369-37-47 Dmitry.
Evgeniy (Ujajara) (St. Pereburg) dismantled a 2007 Camry. Capacity 3.5, 4 bags there are practical things that our client still needs to do write to your personal account or call 89215666615
Sanya (Zafrir) A huge hello to everyone!! drag and drop auction discs, please contact. https://vk.com/zakazkoles
Evgeniy (Cythera) rear light (internal and external) directly on v50!! new! In the box! original! PM contact!
Winthrop v40 meets almost everything
Kolya (Lyubomil) Our client’s settings remain CAMRY. there are body kits, hood wings, etc. questions to your office or by phone 89147217519 payment Dear Modders, if I violate your rules, write to me. Thank you in advance)
Rustam (Kinaya) Crankcase protection for Camry V50 original 3500 spark plugs iridium original 400 rub. 89273320505
Dana (Margret) Pillows in your car! Eco-leather material, seam and logo. silk threads (size 40x40) The tailoring will most likely be special. Cost 1300 rub.
Vladimir (Rasheda) Selling fox exhaust system for Camry 2021 for 19,999 rubles.
Zhenya (Akila) is selling the latest rear optics for the V50! 8000r! 89652985500
Andrew (Eder) Guys, St. Petersburg, sold v30, left 3.2 canister of T4 oil and box filter $7500. Front bearing in a box SKF 1000 RUR. I'll dig it up later.
Pasha (Helmet) CONTRACT OF SPARE PARTS FOR A JAPANESE CAR. SPARE PARTS FOR JAPANESE VEHICLES. DELIVERY TO RUSSIA AND CIS. REMOVAL OF RUSSIAN POSTAL AND TRANSPORT COMPANIES. Question: https://vk.com/japanpartsfull 7
Automatic folding mirrors
HomeCatalog of servicesAdditional equipmentAutomatic folding…
Most modern cars have as standard the undoubtedly convenient function of folding the exterior mirrors, controlled from the interior via a button. That is, before turning off the ignition, by pressing the button, you can fold the mirrors, which is convenient in dense city parking conditions, when the distance to nearby cars is minimal, and any passing person can simply “tear down” the mirror, which can lead to the purchase and installation of a new part….
The function is convenient, but...often, in modern life, we are in such a hurry that we simply forget to do anything, in particular, press the notorious button BEFORE TURNING THE IGNITION OFF, we go out, squeeze under the mirror, getting our clothes dirty. The device we offer allows you to do everything AUTOMATICALLY. That is, it will be enough to lock the car with the key fob, and the mirrors will immediately fold in. When disarmed, the mirrors will remain in the same closed position, which will allow you to calmly walk past the door and get into the car. When you turn on the ignition, the mirrors will automatically open. There is no need to do anything additional. At the same time, the standard function of folding mirrors using a button in the cabin will remain intact and operational.
The heart of the device is a microcontroller that controls all processes, and at the output, power electronic keys. The built-in self-resetting fuse will protect against current overloads and, as a result, failure of the device, when, for example, the mirror freezes in winter. The controller program contains operating algorithms and timed control of mirror closing. In the mode when the ignition is on (the car engine is running), the device is inactive.
We install both universal mirror folding devices and devices designed for a specific car model (they are easier to install). These kits are available for the following cars: Toyota Rav4, Toyota Prado 150, Toyota Camry V50.
INSTALLATION COST | 1000 rub. |
Read the detailed photo report on the installation of the automatic folding mirror device, as well as ask any questions to our technicians. specialists, or take part in the discussion of the topic, you can on our forum.
- (3154) Projection on the windshield LC150 For Toyota Prado 150
Add to cart 6 500a - (3028) Projection of information on the windshield V50/V55 For Toyota Camry V50/V55
Add to cart 6,500a - (3157) Projection on the windshield of RAV-4 For Toyota Rav4
Add to cart 6 500a - (1177) Device for automatic folding of mirrors
Add to cart 3,500a - (1743) Automatic door closing device
Add to cart 3,000a - (3155) Rav4 mirror folding unit (-13) For Toyota Rav4 (-13)
Add to cart 3 000a - (TYPR-007) Mirror folding unit LC150 For Toyota Prado 150
Add to cart 3,000a - (TYCA12-042) Folding mirror unit V50/V55 For Toyota Camry V50/V55/V40
Add to cart 3,000a - (1546) Low beam timer T-7 Add
to cart 1 800a - (4221) USB charging +AUDIO for the standard button Toyota V40/50/55/LC150/200
Add to cart 1,300a - (4351) USB charging + Voltmeter for the standard TOYOTA V40/50/55/LC150/200 button For TOYOTA V40/50/55/LC150/200 Add
to cart 1,300a - (4352) USB charging + Voltmeter for the standard TOYOTA V30/LC120/HILUX button For TOYOTA V30/LC120/HILUX
Add to cart 1,300a - (4065) USB charger for standard Toyota button For Toyota cars
Add to cart 1,000a - (4139) USB charger for standard V30/LC120/Hilux button For Toyota V30/LC120/Hilux
Add to cart 1,000a - (4196) USB charger for standard Mazda button For Mazda cars
Add to cart 1,000a
Average rating:
Leave a comment (1 comment)
Andrey Markov
October 6, 2021
Grade:
A comment:
After the maintenance of the Land Cruiser 200, it issued new updated options... ️After turning off the ignition, when the door is closed, the mirrors automatically unfold! Therefore, when the ignition is turned on, they fold...
Restyling
Installing an auto-dimming rearview mirror in the cabin is called restalling. For connection, use 2 of the 5 connectors, which are located on the back of the mirror.
To replace an existing mirror, you need to loosen the mounting bolt using a torx screwdriver. Next, instead of the old one, you need to install a new mirror to the holder on the glass, and then tighten the fastening bolt. We connect the mirror to the network by first removing the driver's pillar trim and opening the connector where the wires will be connected. The wires are connected with the ignition off. We connect the “+” mirrors and grounds to the connector and insulate the wires.
To carry out the wiring, you need to remove the sun visor with the lock. Carefully bending the car's headliner we lay the wires. They are hidden behind standard wiring and its holders.
In order for you to be able to replace the mirror on your car yourself, it would be advisable to watch a video that describes and shows this process in detail.
Advantages of mirrors on Camry 40
One of the advantages of the mirrors on the Camry 40 is that they are heated, meaning that in any weather they will provide the driver with excellent visibility.
Today you can purchase both an original mirror and a high-quality copy at a more affordable price. In addition, you have the opportunity to buy both new and used mirrors.
Depending on the manufacturer, the price for a right or left mirror for this model will range from 2000 to 4500 rubles. A salon mirror will cost about 2,000 rubles. If it is not important for you that the mirrors are new, purchase used mirrors at a much lower price. In addition, you can buy components for a broken mirror separately, and thus save money.
The mirrors on your car must be in good working order - this is the key to your safety and the safety of your vehicle, so under no circumstances should you put off repairing them until later.