Rear view camera Toyota Camry V40: installation and connection diagram

3858 Apr 20

The rear view camera is an interesting and useful device that helps convey information about the situation behind. In our century, these devices can be found in every car. The problem of parking is a frequent difficulty that arises among drivers of one or another vehicle, because megacities are overloaded with it. In urban conditions, when stopping for a parking lot, every centimeter is important, which can be ensured by installing a Camry 50 front view camera, as well as installing a rear view device.

Advantages and disadvantages of products

The advantage of the devices is the following:

Start camera angle at 130 degrees for clear broadcast.
The presence of a mirror image of the image for clarity.

But at night, the use of these devices is not accompanied by similar efficiency. If there are more advanced devices for the Camry V40, they are correspondingly more expensive.

Pros and cons of the camera on the Toyota Camry

The main advantage of the video camera is the increased viewing angle. Modern models are able to provide an indicator of 130 degrees, which is enough to correctly assess the road situation.

To prevent the driver from getting confused while driving, manufacturers provide a mirror image of all objects behind. So everything will be shown on the screen as conveniently as possible.

Types of KZV for Toyota

These products are offered for sale in a wide variety, and it is sometimes difficult for drivers to make an informed choice. Let's look at the basic types:

Standard and universal products: the first devices are used for certain car groups, while the second are suitable for any type of car.
The image quality is classified according to resolution, color during the day and night, and viewing angle (120–180°).
The division is based on how the rear view camera is installed, whether it contributes to the destruction of the body, or whether the device is attached through elements in the trunk.

Thus, the rear view camera in the Toyota Camry V40 can be of several types.

Choosing a camera for Toyota Camry

For Toyota Camry cars, the most suitable solution seems to be installing a camera instead of the standard backlight. Such systems are easy to use and can also be easily dismantled if necessary.

Often, owners prefer to purchase cameras from restyled versions of cars, which can create some problems even at the installation stage. First of all, you will need to replace the bar with the Toyota sign, which results in additional costs.

In addition, the chrome strip may often not suit a particular car, which means it will require repainting.

There are many functional devices on sale that can be purchased for reasonable money. Prices for standard models vary from 1000 to 3000 rubles. There are many online stores with a large selection of rear view cameras. When choosing, it is important to pay attention to several basic parameters:

possibility of mirroring space;
markings to help park a car in close proximity to an obstacle;
It is advisable to choose a viewing angle of at least 150 degrees;
Possibility of use in the dark.

The matrix of the device is also extremely important, the quality of which directly determines the reliability of the displayed objects. Devices with CCD or CMOS matrices are now common. CCD models are more effective in low light and provide high quality images. However, the operating speed is slightly lower than that of devices with CMOS matrices.

Features of installation work

The connection features of this type of camera will not cause any difficulties. You don't need a lot of knowledge or special equipment.

What you will need for work

The camera comes with several accessories: cables for connecting the device to video, power (ordinary elements). Connection can be made through the use of a GPS navigator, video input, rear view mirror element.

If you want to see the image on a separate screen, you will have to purchase it yourself.

To install the device and turn it on, you will need a set of tools:

screwdrivers with soldering iron;
drill and tape.

Camera functions on Toyota Camry

The rear view camera helps motorists when parking, warning them in time about the possibility of damage to the bumper. It can be mounted on a Camry while maintaining the license plate illumination system, which is not always possible on other cars.

The main assistant to the driver when parking is the rear view mirror system. With their help, you can assess the situation behind the car without unnecessary movements and, if necessary, correct the movement while reversing. However, a properly installed rear view camera seems to be a much more effective method.

The image from the camera can be displayed on a separate screen or occupy some part of a standard mirror.

The choice in favor of the camera was due to the following reasons:

mirrors provide too small a viewing angle;
a large number of “blind spots” arise;
mirrors may simply be useless if the rear window is tinted, there is a passenger in the middle seat, or there are a lot of things on the trunk shelf.
When reversing out of a parking lot, approaching objects behind other cars are clearly visible; mirrors are not an assistant in this case.

Installation steps

To carry out work with installing the device on a Toyota Camry V50 or other cars, for example Camry 40, you need to do a number of sequential works:

De-energize the electrical system and remove the special terminal from the battery mechanism.
Carry out proper installation of the camera in the place intended for this purpose.
Use a drill to drill a hole in the trunk lid, which will later be used for laying cables.
To avoid corrosion of the metal edges, it is necessary to treat them with an appropriate anti-corrosion compound.
Next, on the Camry V40 and other cars of a similar type, lay the video cable to the place where the monitor is located.
At this stage, connect the wires to the device to be connected using the chosen method. For accurate laying, you can use a torpedo and tunnel lining in the center.
Install the monitor device and connect the plugs to it.
Connect the negative terminal to the battery and check that the actions performed are correct.
The last step is setting up the camera and checking that it is working correctly.

What else is worth knowing?

Installation, including by specialists, will not require any changes to the standard parts of the car. The device initially corresponds as closely as possible to the standard landing dimensions.

Our company Carengineering sells equipment with one of the highest protection classes, which is designated IP67. This means that the Camry V50's rear view camera continues to work reliably no matter what the weather conditions are.

Thanks to large viewing angles, the user always knows what is happening around the car. Any obstacle encountered along the way comes into view. Color matrices make camera images as realistic as possible. This allows you to have no doubt about the reliability and relevance of the transmitted information.

The signal from the camera itself is transmitted to the screen of the standard system. The complete set will not require additional investments. Installation of a Camry V50 rear view camera can begin immediately after purchase. No adjustments to operating parameters are required.

Installation of rear view cameras

Currently, almost every motorist wants to install a rear view camera on his “iron horse”. This equipment is offered in every specialized store in considerable quantity and variety.

Therefore, everyone can easily find the most suitable model for their car. Of course, rear view cameras are not universal and identical - each of the varieties has its own characteristics, and they differ in their inherent technical and operational characteristics, and, of course, in cost. Therefore, every responsible motorist should not rush to make a choice, and before purchasing the rear view camera he needs, he should carefully familiarize himself with its inherent features and characteristics.

Before purchasing any device, including these cameras for cars, you need to carefully consider its shape - it is on the basis of this parameter that they determine where not to install it. And we must not forget that not every kit has the necessary fasteners. If they are absent, it will be necessary to dock them with parts of the car body, modifying them at the same time. Most often, in such cases, they embed the camera into the bumper, trunk lid, etc.

In addition to the shape and presence of the mount, you also need to familiarize yourself with the angle of view of the rear view camera. It is not recommended to choose too large, and even more so, too small. Neither the first nor the second will be of any use. If with a small angle of view everything is clear - nothing significant will get into the frame, then with a large angle it’s not so simple either - the view will be so wide that the driver will be distracted by foreign objects and, even more so, it will be difficult for him to drive in reverse.

Therefore, developers and manufacturers of rear view cameras always take into account the needs and wishes of motorists, and do everything for their convenience. And the device itself can be very simple to operate and install, and car owners can easily cope with it. However, this applies to those who have an understanding of the structure of their “iron horse”. Most of them are certainly well aware of this.

Rear view camera washer for Toyota Camry 50 2014-2017 (3042)

Advantages and disadvantages of products

The advantage of the devices is the following:

Start camera angle at 130 degrees for clear broadcast.
The presence of a mirror image of the image for clarity.

But at night, the use of these devices is not accompanied by similar efficiency. If there are more advanced devices for the Camry V40, they are correspondingly more expensive.

Setting up markup

Many car head units, radios, and recorders allow you to customize markings using built-in software algorithms. To do this, you usually need to enter the service menu of the car radio or standard control unit.

It also happens that the driver uses a configured camera with an adjusted reticle, but after repairing or servicing the car, the calibration disappears. This is usually due to the on-board power being turned off for some time (for example, when replacing the battery or temporarily disconnecting the power wires). In this case, you will need to reconfigure the markup. After this you can use it as before.

Setting options may vary significantly depending on the make and model of the car, head unit, and radio. Therefore, we will describe in general terms one of the common algorithms. We will need a wooden block 2 meters long.

Types of KZV for Toyota

These products are offered for sale in a wide variety, and it is sometimes difficult for drivers to make an informed choice. Let's look at the basic types:

Standard and universal products: the first devices are used for certain car groups, while the second are suitable for any type of car.
The image quality is classified according to resolution, color during the day and night, and viewing angle (120–180°).
The division is based on how the rear view camera is installed, whether it contributes to the destruction of the body, or whether the device is attached through elements in the trunk.

Thus, the rear view camera in the Toyota Camry V40 can be of several types.

Rear view camera washer for Toyota Camry 50 2014-2017 (3042)

You can buy camera washer at the following sites:

Rear view camera washer for Toyota Camry 50

We bring to the attention of owners of Toyota Camry 50 cars a simple and convenient accessory that significantly increases the ease of use of the car - Rear view camera washer for Toyota Camry 50 2014-2017 (3042). Made from durable materials, it will serve you faithfully for many years and provide comfort.

Why does your car need a rear view camera washer?

Modern cars are equipped with a rear view camera, which greatly facilitates their operation. This is a convenient and practical accessory, however, it does not have autonomous cleaning facilities as standard. As a result of this, when driving in bad weather and on dusty roads, the camera loses its functionality. Our company will offer a simple and elegant solution - a rear view camera washer for the Toyota Camry 50. By installing it, you can clean the camera at any time, and do it without leaving the car!

How does the washer work?

The rear view camera is installed in a special bracket. Our specialists have developed an exact copy of it, but with additional functionality. It is worth replacing the standard bracket with our bracket with a nozzle, and your Toyota Camry 50 camera washer will turn on simultaneously with the rear window washer.

Having a special design, it provides good cleaning performance and completely washes away dust and dirt from the surface of the camera lens. The device we produce can be easily configured at the owner’s request by adjusting the nozzle and fully performs the functionality assigned to it.

What do you need to know when purchasing CLEANCAM washer?

CLEANCAM washers are high-quality and reliable devices specially designed for a wide range of car models. In their production, we use only high-quality technological structural plastic of great strength, which can easily withstand temperature changes and can be used normally in winter.

The kit contains everything you might need for installation, except for the tool. The list of necessary tools is described at the end of the instructions.

The washers were developed for standard rear view cameras manufactured at the vehicle manufacturer and have not been tested for compatibility with third-party Chinese-made cameras.

With every device we sell, we supply clear installation instructions so you can install it yourself within 15 minutes. If the installation, for some reason, causes you difficulties, the page describing the device always contains a detailed video guide, with explanations from the wizard.

In order to make the process of operating the car more comfortable, you definitely need a washer for the standard rear view camera of the Toyota Camry 50. With its help, you can keep the camera clean in any road conditions and fully use all the capabilities of your car.

Screen view before and after installation. To view, drag the arrow left or right.

Features of installation work

The connection features of this type of camera will not cause any difficulties. You don't need a lot of knowledge or special equipment.

What you will need for work

If you want to see the image on a separate screen, you will have to purchase it yourself.

To install the device and turn it on, you will need a set of tools:

screwdrivers with soldering iron;
drill and tape.

What else is worth knowing?

Installation, including by specialists, will not require any changes to the standard parts of the car. The device initially corresponds as closely as possible to the standard landing dimensions.

Installation steps

To carry out work with installing the device on a Toyota Camry V50 or other cars, for example Camry 40, you need to do a number of sequential works:

De-energize the electrical system and remove the special terminal from the battery mechanism.
Carry out proper installation of the camera in the place intended for this purpose.
Use a drill to drill a hole in the trunk lid, which will later be used for laying cables.
To avoid corrosion of the metal edges, it is necessary to treat them with an appropriate anti-corrosion compound.
Next, on the Camry V40 and other cars of a similar type, lay the video cable to the place where the monitor is located.
At this stage, connect the wires to the device to be connected using the chosen method. For accurate laying, you can use a torpedo and tunnel lining in the center.
Install the monitor device and connect the plugs to it.
Connect the negative terminal to the battery and check that the actions performed are correct.
The last step is setting up the camera and checking that it is working correctly.

Connecting a standard Toyota reverse camera to a car radio

This article is for those who have decided to replace the reverse camera monitor on their Toyota, proudly called the standard multimedia head unit, with a car radio that is more functional in Russian conditions - fortunately, the choice today is huge. If you already have a reverse camera (3X) installed, then it is quite natural that you are thinking about how to connect it to the new “head”.

The most important advice: entrust this operation to qualified ones. Professionals say that no two cars are alike, and they are right. During the installation process, nuances may emerge whose solutions will be obvious to a specialist and completely incomprehensible to a beginner. The consequences of an incorrect decision can be tragic: from non-warranty failure of the camera or car radio itself to serious damage to the vehicle’s on-board electrical network. Think for yourself whether you will take full responsibility for this step or not.

Let's look at the pros and cons of remaking a standard Japanese camera versus buying a new one.

no need to spend money on buying a new camera
you don’t have to waste time laying its wires and disassembling/assembling interior elements,

you will lose both dynamic and static parking lines displayed on the radio display when reversing (dynamic lines “steering” you into parking, if there were any, will disappear in any case, even if you install a new camera)
Perhaps the image on your new screen will be a little darker or a little lighter than on the standard Japanese one.
You will have to work with a soldering iron and feel a little like a radio technician.
You fully assume all risks of failure of the camera, radio or vehicle's on-board network.

Further information is provided for specialists who have never previously encountered the adaptation of a Japanese camera to a non-Japanese radio. So, connection. Which wire goes to what and where at the connector of the standard camera itself is precisely indicated in this figure (suitable for most Toyotas, if you do not have such a connector, look for yours on the Internet yourself). To begin with, let's take it for granted that the power supply for a standard Japanese camera is not 12V, but 6V - be careful. You need to solder the camera power stabilizer yourself, for which we go to a radio parts store and buy this microcircuit called KR142EN5B, which is essentially a linear positive voltage stabilizer in a TO-220 package with a fixed output voltage of 6V. The metal flange of the stabilizer, which must be screwed onto the cooling metal radiator, is connected to a common wire (middle terminal) - feel free to screw it directly onto the car body. We need to assemble such a circuit, so for it we will need two more electrolytic capacitors Cvx = 2.2 μF (min.), Cout = 1.0 μF (min.), designed for an operating voltage of at least 12V and purchased in advance from the same radio store , as the microcircuit.

We cut the power wire on the camera cable near it (1 pin in the connector picture). The simplest way to solve the issue with power supply and activation of the camera, so as not to pull extra wires through the interior, is to remove + 12V from the 3X indication lamp in the rear optics units and apply this voltage simultaneously to the input of the step-down power regulator we assembled earlier and to the only long one remaining in the cable that the end is cut off from the camera. “Having then caught these +12V on the standard camera connector near the “head” on the same pin 1, we connect it to the radio wire, which activates the reverse camera mode. For example, for the TOYOTA 9174 GPS car radio this is an orange wire labeled “Rear View Camera”. Without cutting, pins 3 and 4 of the camera’s standard wires are short-circuited together and “mounted” on the body. From the output of the step-down stabilizer we supply +6V to the camera.