How much oil is in a Toyota Rav 4 - 3, 4 generation engine

• home
• Brands
• Toyota

03.08.2020
Toyota RAV4 is the world's first compact crossover, introduced in 1994. The lack of competition brought this model enormous popularity, and the car remained in demand even after the appearance of its first classmates, such as the Honda CR-V. So, starting from the mid-1990s, only five generations of RAV4 were released, which were designed on the basis of the Corolla passenger model. Therefore, the SUV of the same name is not a full-fledged SUV, despite the presence of all-wheel drive, as well as a multi-plate clutch, which began to be offered in the third generation.

MOBIL 1 ESP 5W-30

MOBIL 1 ESP 5W-30

This world-famous brand produces motor oil of the highest quality, the only drawback of which is its popularity on the market, which has become the unwitting reason for the appearance of a large number of counterfeits. When choosing a lubricant of this brand for your car, first of all you should make sure that the product is original.

In Toyota RAV 4, with a production year no older than 5 years, MOBIL 1 ESP 5W-30 engine oil can be filled without any fear - it fully complies with the manufacturer’s requirements. Owners in their reviews especially emphasize high resistance to low temperatures, completely unnoticeable waste consumption under intense loads, excellent cleaning properties, thanks to which the lubrication system is maintained in a condition identical to the new engine. Quieter engine operation, reduced vibration and fuel consumption are noted - the oil demonstrates excellent anti-friction properties.

Number of refills and brands of fluids for the Toyota Rav 4 crossover

Changing fluids in a car is not an easy procedure. Despite this, every driver has to undergo such a test. During the work, you can roughly understand how the system works and do everything as carefully as possible without damaging other components.

First you need to drain the old fluid, which has served its intended purpose. Usually this is 10,000 km, but you can find out a more accurate figure in the Toyota Rav 4 service book.

There you will also find a description of the process itself, although they are almost identical on 90% of cars.

So, before draining, you need to let the engine run for a few minutes so that the oil warms up. Because of this, it becomes rare and drains much faster. The drain plug is located in the pan. It is a bolt screwed into a hole. Accordingly, if you unscrew it, the substance will immediately flow out.

You need to be prepared for this and pick up unnecessary dishes that you can then throw away. It should contain all the old oil. After you remove it from the engine, you need to rinse the engine with a special compound that will remove chips and residues.

After this procedure, all that remains is to replace the oil filter, tighten the drain hole and fill in the amount of oil specified in the instructions. The table below provides detailed information.

The volume of oils and fuel fluids of the Toyota Rav 4 SUV

IDEMITSU Zepro Eco Medalist 0W-20

IDEMITSU Zepro Eco Medalist 0W-20

Zepro Eco Medalist belongs to the category of energy-saving, highly environmentally friendly lubricants and is created using modern technology, including the active component - organic molybdenum. The engine oil base is made from highly purified synthesized material. The surface tension of the lubricating fluid contributes to the formation of a stable film on the rubbing areas, which is resistant to mechanical stress.

Reviews from owners who pour this oil into the Toyota RAV 4 engine contain positive assessments of the following properties:

• Reduced engine wear, especially in the cylinder-piston group area;
• Excellent cleaning and antioxidant characteristics;
• Economical,
• Lower vibration and noise levels.

In addition, IDEMITSU Zepro Eco Medalist provides easy engine starting at -50 °C, which is of great importance for the northern regions of the country. The quality of lubrication does not change depending on the nature of the load - engine oil performs its functions perfectly in extreme conditions.

How often to replace

The oil in the Toyota Rav 4 engine is changed after every 10 thousand kilometers. Difficult operating conditions (dusty roads, frequent accelerations and stops, aggressive driving, questionable fuel quality) reduce the indicated figure to 5 thousand kilometers. It is recommended to change the lubricant at least once a year.

Immediate replacement should be carried out if foreign suspensions (black inclusions) appear in the mixture, or if there is a change in color or odor. These signs are noticeable when checking the engine oil level.

TOTAL Quartz INEO Long Life 5W-30

TOTAL Quartz INEO Long Life 5W-30

Synthetic motor oil for modern gasoline and diesel engines, belonging to the new class of Low SAPS lubricants. This technology is a breakthrough in development in the fight to protect the environment from the negative effects of exhaust gases. INEO Long Life 5W-30 lubricant optimizes the performance and extends the service life of the particulate filter thanks to a 50% reduced metal content.

When the car is frequently used in difficult conditions, the use of this oil is more preferable. Owner reviews especially emphasize easy engine starting at any temperature, high-quality lubrication and keeping engine components and parts perfectly clean, as well as fuel economy. High antioxidant properties allow you to increase the interval between oil changes, which will not at all affect the quality of operation of the Toyota RAV 4, but will allow you to optimize maintenance costs.

Toyota Rav4 II XA20 2000-2005

According to the vehicle operating instructions for the Toyota RAV4 (model 1AZ-FE), it is necessary to use the type SL or SJ oil with the inscription “Energy Conserving” in accordance with the API classification. It is also acceptable to use all-season motor oils certified according to ILSAC. The “Energy Conserving” designation indicates the energy-saving properties of the motor fluid. The selection of lubricant viscosity is carried out according to scheme 2.

Scheme 2. Dependence of motor oil viscosity on the air temperature of the region in which the car is operated.

According to Scheme 2, it is preferable to use 5w-30 motor oil; 10w-30, 15w-40 and 20w-50 motor oils should not be filled if the air temperature is below -18 0 C, since starting the engine will be difficult, plus the fuel consumption of the car will increase.

The sign shown in Figure 2 indicates that the oil complies with API standards.

Figure 2. API service symbol.

Refueling volumes

For the 1AZ-FE Toyota RAV4 engine, the volume of engine fluid required when replacing is 4.2 liters with oil filter replacement (volume for a dry engine 4.9 liters).

TOYOTA SAE 0W-20

TOYOTA SAE 0W-20

The engine manufacturer knows best which oil to pour into the engine. Specially developed by order of the automaker for modern gasoline engines, including the new Toyota RAV 4, the oil meets the high requirements of the American Petroleum Institute, as well as international quality standards for this type of product. The original lubricant is considered the best for the care and protection of engine parts of a car of this brand.

High-quality additives contained in TOYOTA SAE 0W-20 can significantly reduce fuel consumption, which is confirmed by reviews from various owners who fill this engine oil. Improved lubricant characteristics and high engine performance were recorded during tests carried out by the manufacturer under conditions comparable to actual operation.

Engine oil change procedure

Before replacement, the engine is warmed up to operating temperatures. Warming up increases the fluidity of the composition. Replacement is carried out on an overpass or lift. Before starting work, turn off the engine.

If the replacement is carried out on an overpass, then fixing elements are first placed under the wheels. Otherwise the car may roll.

Work order:

1. Place the waste container under the drain bolt (installed on the bottom of the car) and unscrew it. Remains of old oil from the fasteners are removed with a rag.
2. The bolt is screwed into place. The flush is filled to the lower limit, the engine is turned on for 10 minutes (idling) and drained.
3. Remove the old oil filter and pour new oil into it (about 200 ml). Then the element is installed in its place, and new lubricant is poured into the engine.

For Rav 4s produced before 2001, the filter is located at the top of the engine. In more modern versions it is located at the bottom.

Ravenol FEL SAE 5W-30

Ravenol FEL SAE 5W-30

In diesel engines 2AD-FTV and 2AD-FHV, in addition to the original oil recommended by the factory, the owner can fill in any oil with the specified properties, but Ravenol FEL is most suitable. This lubricant is approved for use in the specified types of engines and has a number of advantages:

• Saves fuel, regardless of the nature of the load;
• Promotes easy engine starting in severe frosts;
• The oil film is highly durable;
• Significantly reduces friction, which leads to reduced vibration and noise;
• Does not form foam, suppresses oxidative processes.

Engine oil for Toyota RAV 4 III generation (restyling 2010 – 2012)

Viscosity class according to SAE: 0w-20, 5w-20, 5w-30, 10w-30 Standards: Quality class according to API: SL, SM (“Energy Conserving”) SN (“Resource Conserving”)

SAE viscosity grade: 15w-40, 20w-50 Standards: API quality grade: SL, SM or SN

SAE viscosity grade: 5w-30 (preferred), 10w-30 Standards: API quality grade: SL, SM (“Energy Conserving”) SN (“Resource Conserving”)

SAE viscosity grade: 15w-40, 20w-50 Standards: API quality grade: SL, SM or SN

ENEOS Super Gasoline SM 5W-30

ENEOS Super Gasoline SM 5W-30

High-quality synthetic motor lubricant from South Korea deservedly enjoys the respect of Toyota RAV4 owners. The viscosity indicators of ENEOS Super Gasoline SM 5W-30 in various temperature conditions demonstrate enviable stability, which has a huge impact on engine performance in various conditions.

Japanese engineers have created a complex of modern additives containing molybdenum disulfide, the main property of which is to reduce friction of contacting parts and, as a result, to carefully use the engine's operating life and increase the duration of its trouble-free operation. In addition to these features, owner reviews confirm the energy-saving and economical characteristics of ENEOS Super Gasoline engine oil.

TOYOTA Fuel Economy 5W-30

TOYOTA Fuel Economy 5W-30

Each owner decides for himself which oil to pour into the Toyota RAV4 engine, but it’s definitely worth listening to the manufacturer who created this car. TOYOTA Fuel Economy provides the moving parts of the engine with everything they need to operate efficiently. The lubricant has a low freezing threshold and allows you to easily start the engine down to -35 °C.

In addition, the high thermal capacity of the engine oil provides protection against overheating under peak loads, while maintaining viscosity levels unchanged. In their reviews, some owners draw attention to the presence of a large number of fakes. The manufacturer does not provide the product with modern interactive protection, so the buyer should be attentive to the quality of the packaging and take a more balanced approach to choosing a seller.

Oil for Rav 4 4th generation (2013 - 2018)

What engine oil and in what quantities should be used to replace the 2014 Toyota Rav 4 depends on the installed engine. Models are available with gasoline and diesel engines.

For gasoline engines

The change must be carried out. In this case, you can use analog lubricants. These include:

• certified lubricant with a viscosity of 15W-40 .
• Classes SL and SM with energy-saving properties, as well as SN API standards .

To replace the lubricant in the 2015 Rav 4, you will need to prepare the following volumes (without filter/including filter element):

• 4.0/4.4 l – for ICE brand 2AR-FE;
• 3.9/4.2 l – 3ZR-FE, 3ZR-FAE.

For diesel engines

On diesel Toyota Rav 4 2021, the following can be used to change the oil:

• original – “Toyota Genuine Motor Oil”;
• analogue – C2, C3 according to ACEA standards.

It is not recommended to use other lubricants for replacement, as this will lead to damage to the catalytic converter.

Next, let's look at how much lubricant is used in the Rav 4 diesel engine:

• 4.7 liters without installing a new filter and 5.2 liters with its installation – for 2WW brand internal combustion engines;
• five and a half liters without changing and 5.9 liters with the installation of a new filter - 2AD-FTV and 2AD-FHV.