The reliability of any car largely depends on regular and timely maintenance. Changing the Toyota Corolla oil is one of the main operations in the list of routine maintenance that is regularly carried out during the operation of this popular car.
Information! The Japanese passenger car Toyota Corolla, known to all car enthusiasts, has been in mass production for more than 50 years (1966). During this time, constantly improving (11 generations), more than 40 million cars were produced. It has been repeatedly recognized as the most reliable in the compact car class.
Getting ready for replacement
Replacing used motor oil, or as it is sometimes called “waste oil,” must be carried out in strict accordance with the requirements of the vehicle’s operating manual.
What kind of oil to pour
The type of engine oil that needs to be poured into the engine of a Toyota Corolla car is necessarily indicated in the operating instructions and depends on the year it was produced.
At the same time, the Toyota Motor Corporation (1937) recommends using original Toyota Engine Oil or similar products from well-known companies Castrol, Mobil, etc.
- Toyota Corolla engines from 1st to 9th generation (1966-2008)
For engines installed in cars manufactured before 2009, motor oil that meets the requirements of the international standards API SL and ACEA A3/B4 is suitable. Automotive lubricants manufactured according to these standards provide reliable protection of power units from wear in any operating modes and climatic conditions. They are also recommended for use during extended oil change intervals. This group includes oils with viscosity 0W30, 5W40, etc.
- Toyota Corolla engines from 9th to 11th generation (2006 - present)
Oil for engines installed in modern cars must comply with the international standard ILSAC GF-5. They are characterized by a low phosphorus content, which contributes to a low content of environmentally harmful substances in the exhaust gases. In addition, auto lubricants manufactured in accordance with this standard reduce wear of engine parts and help reduce fuel consumption.
- Toyota Corolla power units running on diesel fuel
When choosing an auto lubricant for a diesel engine, you need to pay attention to the presence or absence of a particulate filter. At the same time, for car engines with installed particulate filters, it is recommended to use oils of the Low SAPS category, which are characterized by low phosphorus and sulfur content, as well as low sulfate ash content. Their use helps reduce fuel consumption and protect parts from premature wear. This category includes oils that meet the ACEA C2 standard (0W-30, 5W-30, etc.).
As for cars that do not have a particulate filter, lubricants that meet ACEA A5/B5 and API SL/CF standards are recommended for their engines. They significantly reduce wear on engine parts. Also, having high resistance to oxidation, oils of this category can be used for quite a long time under the most severe operating conditions.
Recommendations for selection
When choosing engine oil, specialists working at service stations recommend giving preference to the following products:
- recommended by the vehicle manufacturer;
- the year and month of manufacture of which coincides with the date of replacement “working out”.
Where is the Toyota Corolla Oil Filter ~ AUTOTEXNIKA.RU
Toyota Corolla Engine, Auris
The oil filter and oil are changed every 10,000 km; the replacement date may vary slightly depending on certain operating criteria.
This article provides an example of changing the Toyota Corolla car oil from 2010.
Since 2006, all operations are similar, except that the design uses a traditional oil filter in an iron housing instead of a filter.
To remove and install the oil filter on a Toyota Corolla, you will need the following tools: 14 mm socket, oil pan cover wrench 09228-06501, chain or soft with a strip puller. oil filter , watering can, screwdriver.
- Use a screwdriver to remove the rubber plugs from their positions in the engine guard
- Remove the filler plug in the engine compartment.
- Unscrew the 14 mm plug from the crankcase with a key to drain the oil
- We fill in more than 4.2 liters of oil, namely the amount of oil in the crankcase of a Toyota Corolla 2006 - 1.6 liter engine from ZR-FE
We unscrew the cap using a special key 09228-06501. You can also unscrew the cap using tape or a chain wrench. When unscrewing the chain wrench, you must wrap the chain in a flap to avoid breaking and leaving marks on the plastic cap. This is exactly how I filmed it.
Toyota Corolla X (Toyota Corolla 2010-2013) Engine oil change 1.6 (1ZR-FE)
In this video we will describe in detail how, without outside help, quickly and miraculously, without much effort.
replacing oil filter Toyota Corolla
replacement Toyota Corolla
. Changing the engine oil. You can change the oil daily from 9-00 to.
Remove the cover from the filter element.
- Remove filter element
- Instead of the original Toyota filter element, code 04152-37010, an analogue of Knecht (Mahle filter) OX 416 D1 is installed
- Seat filter insert. It should be noted that metal cartridges are spring-loaded, ensuring cartridge clamp replacement on the sealing surfaces
Hat type filter insert . Labels: turn clockwise, turn counterclockwise. tightening torque 25 Nm, i.e. 2.55 kg per meter.
Six threads, that is, six turns to fully tighten. A rubber O-ring (cross section) is installed on the cover. If the ring is in good condition without clogging or sagging, there is little reason to replace it. New ring added to new filter. Change the oil if necessary.
Install a new filter element.
Season with oil. Oil is absorbed into the porous surface, so add more oil after absorption. It is necessary that the oil begins to flow into the valves through the cardboard in the first seconds so as not to get into the replacement input chamber.
Replace the filter cover.
Pay attention to the location of the cover. It must be adjusted in position before removal. There are marks on the cover, including an index. seen in the photo opposite the number 10 on the roulette wheel.
Pour the oil through the oil filler neck. Wrap the fork.
The oil should be between the level marks. After the first check, check the engine oil level and add if necessary.
I also wanted to highlight the option of quickly changing the oil in a car engine; more detailed information about the technology of operation and the features of such a replacement can be found in the article. "Express engine oil change"
Source: https://autotexnika.ru/gde-nahoditsja-masljanyj-filtr-tojota-korolla/
Engine oil volume
Over the years, Toyota Corolla cars have been equipped with a variety of power units, differing in both cylinder displacement, power, and torque.
Depending on which engine is installed in a particular model, the amount of oil that is poured into the engine can vary from 3.5 liters (cylinder volume 1.3 liters, power 84 hp) to 4.3 liters (cylinder volume 2.4 l, power 158 hp).
Changing the oil
The oil filter and oil filter must be changed regularly every 10 thousand kilometers. At the same time, experts recommend shortening this interval and replacing it after 5-7 thousand kilometers (depending on operating conditions).
IMPORTANT! The classic oil filter in a metal casing was installed on power units of the Toyota Motor Corporation until 2010. Currently, a special filter insert is used instead, which, when replaced, is inserted into a special plastic cap. All other operations are identical.
Tools
Before you begin the oil change procedure, you need to prepare the appropriate tools, accessories and auxiliary materials. In general, in addition to new motor oil, their list includes:
- a special oil filter puller (belt or chain) or a wrench for removing the oil insert cap (code 09228-06501);
- funnel;
- oil filter or insert;
- socket wrench (head) 14;
- screwdriver;
- container for draining old auto lubricant (at least 5 l);
- latex gloves;
- rags.
Changing the oil and oil filter Toyota Corolla 2010-2014
To remove and install the oil filter on a Toyota Corolla, you will need the following tools: a 14 mm socket, a wrench for the oil insert cap code 09228-06501 or a chain or soft oil filter puller with a strap, a funnel, a screwdriver.
View of the filter insert cap. Inscriptions: screw clockwise, unscrew counterclockwise. tightening torque 25 N*m, that is, 2.55 kg per meter.
Six threads, that is, six turns until fully tightened. A rubber sealing ring (circular cross-section) is installed on the cap. If the ring is in good condition without nicks or nicks, then there is little point in changing it. The new filter comes with a new ring. If necessary, replace and lubricate with oil.
We install a new filter element.
Add oil. The oil is absorbed into the porous surface, so once it has been absorbed, add more oil. This is necessary so that in the first seconds of starting the engine, oil immediately begins to flow to the valves through the cardboard, and does not linger in the chamber of the replaceable insert.
We install the cap with the filter insert in place.
Pay attention to the location of the cap. It must reach its position before removal. There are marks on the cap between which there should be a pointer - you can see in the photo opposite the number 10 on the tape measure.
