Rating of the best car wheels for Toyota Camry 40

3500 Apr 20

You can highlight the already elegant and stylish appearance of your Toyota Camry without resorting to complex and expensive tuning. To do this, it is enough to choose the right wheels for the car. Unfortunately, even the most experienced motorists are not always able to do this correctly (they simply buy the accessory they like), because today there are several dozen wheel rim manufacturing companies alone. Not to mention the range of products they produce. In addition, each specific vehicle model has its own nuances in the selection of wheels, which are important to take into account.

High-quality Vossen wheels, which have been produced all over the world for more than 25 years, will help add additional notes of originality to the Camry design.

Description of the exterior and interior

White Camry 55
Toyota engineers tried to rejuvenate the Camry and make it more attractive to young buyers.

Camry 55 appearance

A noticeable change in the 2015 Camry's exterior design is the large grille, which is reminiscent of a Lexus, adding an aggressive look. The photo shows that the front bumper has become more intricate, and air intake holes have been added. The shape of the front optics has become more complex, and daytime running lights have been added. The general impression from the front of the Camry 55 is that the car looks like a predator.

The changes in the design of the rear of the car are not so obvious; at first glance, it seems that only the lights have been changed. But the rear was completely changed: the wide chrome “saber” above the license plate was replaced by a thin, sharp “sword”, the bumper became a different shape, and the design and location of the reflectors changed.

Camry 50 above Camry 55 below

Salon XV55

The interior of the Camry 55 has been redesigned, with a new three-spoke steering wheel that looks lighter and more taut than the previous four-spoke one. The lateral support of the front seats has become more noticeable; slender drivers do not hang out in the seat. The instrument panel has become different; instead of three wells, there are two (tachometer and speedometer) and between them there is a large on-board computer screen (4.2 inches). The dashboard lights turned bright blue. The changes also affected the climate control unit, the overall architecture is different, huge “knobs” are a thing of the past, and buttons have taken their place. The multimedia screen may be larger depending on the configuration.

Steering wheel and dashboard Camry 50 and 55

The Camry 2015 interior did not become larger because the wheelbase remained the same (2775 mm), but there was enough space inside even before restyling. The design of the key in medium and expensive trim levels has also changed; if previously they were just keys, now a little attention has been paid to their appearance. Wireless charging for mobile phones has appeared.

Features of operation of Vossen wheels

The company's range of wheels comes in a wide range of sizes, but the most popular among Camry owners are wheels of size R17 or R20 with low-profile tires installed on them. The design of the entire model range, without exception, provides for the installation of sensors for monitoring the air pressure inside the tires.

In addition, their feature is the complete compatibility of all existing technological gaps, which allows the car owner to carry out various upgrades of the braking system if necessary. This solution is very convenient.

The combination of all these features, plus high quality control standards at all stages of wheel manufacturing, allows the manufacturer to provide an extended, five-year warranty for the entire range of products. Of course, only this can be the main proof of the impeccability, high quality and durability of the entire model range.

The Vossen Camry products are the perfect complement to the vehicle. The originality of their design allows you to distinguish your car from the gray mass of millions of vehicles that travel every day along the country's roads.

Engine and transmission

The Camry 55 was equipped with three gasoline engines:

2.0 6AR-FSE 150 hp

2.5 2AR-FE 181 hp

3.5 V6 2GR-FE 249 hp

The 2.5 2AR and 3.5 2GR engines remained the same as on the Camry 50, but the available 2.0 6AR replaced the equal-volume 2.0 1AZ. If the previous two-liter engine developed 148 horsepower and 190 Nm of torque, then the power of the new 6AR-FSE is 150 hp. and 199 N*m.

Engine 2.0 6AR

The new engine has become more technologically advanced; the compression ratio has increased to 12.7, a new VVT-iW intake variable timing system, and combined fuel injection have appeared. These innovations have made the 2021 Camry with a two-liter engine faster and more economical. Acceleration to hundreds is declared by the manufacturer in 10.4, the previous modification had 12.5. The new engine allows the use of 92 gasoline.

The new 6-speed automatic plays an important role in reducing fuel consumption and changing the dynamics of the Camry 55 with a two-liter engine. In the 2011 Camry, the 2.0 engine was paired with a four-speed automatic transmission.

see also

Comments 54

Please tell me the tire sizes

CVTs would look smart!

I didn’t like the Lex that I liked (((and I didn’t want a smaller package. I like the Gs 350.

In general, I see so many improvements... Maybe Lexus then?

In this regard, my good advice is to leave the staff. You will avoid a lot of Gamorra.

I’ll have time to think until spring... Thanks for the advice!

What roads do you plan to drive on with a similar diameter? It is very interesting to me. IMHO the Camry is a car designed for comfortable movement and its philosophy and design are like this... Maybe it’s still a BMW, huh?

I don’t know about philosophy, but the roads are getting worse every day at this rate, you need to go to 16 or move very slowly. And I don’t know about the Beshka, I haven’t thought about it, and the Camry is somehow closer.

Eee...they suit her very well.

It seems so to me too.

The Vossens are all beautiful, I saw the cv7 on a Lexus and it looks very nice. This means it will look good on a Camry too. And where there is little filling and more emptiness seems too huge. Cv7 seems to have normal content. Let's see.

Now it turns out that cv7 is made only from size 20.

this is a sign!))) buy 20″

Now it turns out that cv7 is made only from size 20.

to be honest, I prefer (CV5,CV4,CV3)

Features and differences from Camry 50

Camry 55 engineers tried to make the sedan sporty and aggressive, and worked on the shortcomings of the previous model. The main changes that distinguish the Camry 2014 from the pre-restyling:

• new appearance (predatory front design, modified rear),
• three-spoke steering wheel,
• different dashboard with a large on-board computer screen and blue backlight,
• large multimedia screen,
• modified climate control unit,
• wireless charger,
• pair of 2.0 6AR engine and six-speed automatic transmission.

Camry 55 dashboard
Changes also affected options and additional equipment. The XV55 now comes with a windshield that heats the entire surface, not just the resting area of ​​the wipers. A blind spot monitoring system has become available, and heated rear seats are now available in mid-range trim levels. The updated Camry is equipped with a preload differential; the locking coefficient is not great, but the car has become more stable.

Specifications

Camry 55 is a restyling of Camry 50, so many of their technical characteristics are identical. The ground clearance is 160 mm, the wheelbase is 2775 mm, the trunk and fuel tank volumes are equal - 506 and 70 liters, respectively, the wheel size remains unchanged 215/60 R16, 215/55 R17. The length of the car increased by 25mm, it was 4825, but became 4850, the height and width remained the same.

Camry 55

The performance of cars with 2.5 2AR-FE and 3.5 V6 2GR-FE engines has not changed (power, torque, fuel consumption, dynamics):

• 2.5 2AR 181hp 231 N*m, 7.8 l per 100 km in the combined cycle, 9 sec. up to 100 km/h
• 3.5 2GR 249hp 346 N*m, 9.3 l per 100 km in the combined cycle 7.1 sec. up to 100 km\

But the performance of the 2014 Camry with the 2.0 engine has changed. The engine is installed differently and is paired with a six-speed automatic transmission instead of a 4-speed automatic transmission. The power and torque figures have not changed significantly, from 148 to 150 horsepower and 190,199 Newton per meter, respectively.

On paper, the dynamics of acceleration to the first hundred changed by 2.1 seconds, before restyling 12.5, Camry 55 10.4. The maximum speed has increased from 190 to 210 km/h.

Weaknesses and advantages of Camry 55

Camry 2015 is a successor to the traditions of previous generations, retaining the main advantages and disadvantages of its predecessors. The traditional advantages of the Camry are known, although they are questioned:

• reliability,
• ease of maintenance,
• solidity,
• profitability,
• high demand in the secondary market.

The disadvantages of Camry 55 will not be a revelation for interested car enthusiasts:

• poor sound insulation,
• poor controllability,
• high theftability,
• soft paint coating,
• insufficient high beam.

Black Camry - classic

2021 Camry Update

The updated Toyota Camry 55 went on sale on the Russian market in April 2021. The appearance of the sedan was slightly changed, and some options became available. Fog lights based on diodes are now available in all versions. LED headlights are installed in the Elegance Plus and more expensive configurations. The color scheme of the sedan has been replenished with a new brown shade. The Prestige option package that appeared in the updated version offers a new radiator grille design and turn indicators in the front bumper.

Camry 55 and 2021 update

If previously the Toyota Camry Exclusive was offered only with brown leather, now it is possible to order the Exclusive with black leather trim. The technical characteristics of the updated car have not changed.

Rating of the best car wheels for Toyota Camry 40

Rating 2021 of the best car wheels for Toyota Camry 40 according to independent experts. Compare prices in online stores in your city online with the option to buy right now with delivery or pickup.

The following wheel sizes are suitable for the Toyota Camry 40:

• 6.5xR16 5*114.3 D60.1 ET45
• 7xR17 5*114.3 D60.1 ET45

TOP 3 proven and reliable (price-quality) online stores:

1. Free Wheels
2. Euro-Discs
3. Black Tires

iFree car wheels for Toyota Camry 40

iFree Moscow

19 reviews

• Type:
  cast
• Material:
  light alloy
• Number of mounting holes:
  5
• Width x rim diameter (JxD):
  6.5x16″
• Drilling (NxPCD):
  5×108 / 5×100 / 5×112 / 5×114.3 / 5×105 / 5×115 / 5×110
• Center Hole Diameter:
  67.1mm / 63.35mm / 56.1mm / 66.6mm / 57.1mm / 66.1mm / 56.6mm / 60.1mm / 70.2mm / 65.1mm
• Reach (ET):
  43mm / 50mm / 48mm / 38mm / 45mm / 46mm / 33mm / 35mm / 40mm / 39mm / 41mm / 31.50mm / 37mm
• Rim Diameter (D):
  16
• Rim Width (J):
  6,5
• Hole location diameter:
  108,0 / 100,0 / 112,0 / 114,3 / 105,0 / 115,0 / 110,0
• Center Hole Diameter (DIA):
  67,10 / 63,35 / 56,10 / 66,60 / 57,10 / 66,10 / 56,60 / 60,10 / 70,20 / 65,10

ALCASTA car wheels for Toyota Camry 40

ALCASTA M14

2 reviews

• Type:
  cast
• Material:
  light alloy
• Number of mounting holes:
  5
• Width x rim diameter (JxD):
  6.5x16″ / 7x17″ / 6.5x15″ / 6.5x17″
• Drilling (NxPCD):
  5×114.3 / 5×112 / 5×100 / 4×100 / 5×120 / 5×115 / 5×108 / 5×110 / 5×105 / 4×108
• Center Hole Diameter:
  66.1mm / 57.1mm / 67.1mm / 56.1mm / 64.1mm / 54.1mm / 70.3mm / 63.3mm / 60.1mm / 70.1mm / 65.1mm / 56mm / 56.6mm
• Reach (ET):
  40mm / 42mm / 33mm / 38mm / 35mm / 48mm / 45mm / 52mm / 50mm / 41mm / 46mm / 52.50mm / 51mm / 39mm / 37mm / 47 mm
• Rim Diameter (D):
  16 / 17 / 15
• Rim Width (J):
  6,5 / 7,0
• Hole location diameter:
  114,3 / 112,0 / 100,0 / 120,0 / 115,0 / 108,0 / 110,0 / 105,0
• Center Hole Diameter (DIA):
  66,10 / 57,10 / 67,10 / 56,10 / 64,10 / 54,10 / 70,30 / 63,30 / 60,10 / 70,10 / 65,10 / 56,00 / 56,60

ALCASTA M30

1 review

• Type:
  cast
• Material:
  light alloy
• Number of mounting holes:
  5
• Width x rim diameter (JxD):
  8x18″ / 6.5x17″ / 7x17″ / 5.5x14″ / 6.5x16″ / 6.5x15″ / 6x15″ / 7.5x18″ / 5.5x15″
• Drilling (NxPCD):
  5×114.3 / 5×108 / 4×98 / 4×100 / 5×100 / 5×112 / 5×120 / 5×105 / 4×114.3 / 5×115 / 5×110 / 4×108
• Center Hole Diameter:
  60.1mm / 67.1mm / 63.3mm / 58.6mm / 56.6mm / 66.1mm / 57.1mm / 54.1mm / 66.6mm / 64.1mm / 70.3mm / 65.1mm / 56.1mm
• Reach (ET):
  35mm / 48mm / 50mm / 49mm / 39mm / 40mm / 46mm / 32mm / 52mm / 45mm / 42mm / 38mm / 36mm / 43mm / 47mm / 33 mm / 37.50 mm / 37 mm
• Rim Diameter (D):
  18 / 17 / 14 / 16 / 15
• Rim Width (J):
  8,0 / 6,5 / 7,0 / 5,5 / 6,0 / 7,5
• Hole location diameter:
  114,3 / 108,0 / 98,0 / 100,0 / 112,0 / 120,0 / 105,0 / 115,0 / 110,0
• Center Hole Diameter (DIA):
  60,10 / 67,10 / 63,30 / 58,60 / 56,60 / 66,10 / 57,10 / 54,10 / 66,60 / 64,10 / 70,30 / 65,10 / 56,10

ALCASTA M43

0 reviews

• Type:
  cast
• Material:
  light alloy
• Number of mounting holes:
  5
• Width x rim diameter (JxD):
  7x17″ / 6.5x16″ / 8x18″ / 7x18″
• Drilling (NxPCD):
  5×114.3 / 5×112 / 5×108 / 4×100 / 5×100 / 4×108 / 5×120 / 5×105
• Center Hole Diameter:
  67.1mm / 57.1mm / 63.3mm / 60.1mm / 66.6mm / 56.1mm / 66.1mm / 64.1mm / 72.6mm / 56.6mm
• Reach (ET):
  35 / 50 / 50 mm / 55 mm / 40 mm / 45 mm / 46 mm / 39 mm / 35 mm / 41 mm / 48 mm / 47 mm / 38 mm / 33 mm / 36 mm / 43 mm / 51 mm / 37.50 mm / 30 mm / 42 mm / 48.50 mm
• Rim Diameter (D):
  17 / 16 / 18
• Rim Width (J):
  7,0 / 6,5 / 8,0
• Hole location diameter:
  114,3 / 112,0 / 108,0 / 100,0 / 120,0 / 105,0
• Center Hole Diameter (DIA):
  67,10 / 57,10 / 63,30 / 60,10 / 66,60 / 56,10 / 66,10 / 64,10 / 72,60 / 56,60

ALCASTA M31

6 reviews

• Type:
  cast
• Material:
  light alloy
• Number of mounting holes:
  5
• Width x rim diameter (JxD):
  6.5x15″ / 6x15″ / 6.5x16″ / 7x17″ / 8x18″ / 7.5x18″ / 5.5x14″ / 6.5x17″
• Drilling (NxPCD):
  4×100 / 4×114.3 / 4×98 / 5×108 / 5×112 / 5×114.3 / 5×105 / 5×120 / 4×108 / 5×100 / 5×110 / 5×115
• Center Hole Diameter:
  56.6mm / 66.1mm / 58.6mm / 63.3mm / 57.1mm / 60.1mm / 64.1mm / 67.1mm / 54.1mm / 65.1mm / 66.6mm / 70.3mm / 56.1mm
• Reach (ET):
  40 / 32 / 50 mm / 39 mm / 45 mm / 35 mm / 46 mm / 42 mm / 37.50 mm / 40 mm / 38 mm / 49 mm / 48 mm / 36 mm / 33 mm / 47 mm / 43 mm / 52 mm / 37 mm / 54 mm
• Rim Diameter (D):
  15 / 16 / 17 / 18 / 14
• Rim Width (J):
  6,5 / 6,0 / 7,0 / 8,0 / 7,5 / 5,5
• Hole location diameter:
  100,0 / 114,3 / 98,0 / 108,0 / 112,0 / 105,0 / 120,0 / 110,0 / 115,0
• Center Hole Diameter (DIA):
  56,60 / 66,10 / 58,60 / 63,30 / 57,10 / 60,10 / 64,10 / 67,10 / 54,10 / 65,10 / 66,60 / 70,30 / 56,10

ALCASTA M16

0 reviews

• Type:
  cast
• Material:
  light alloy
• Number of mounting holes:
  5
• Width x rim diameter (JxD):
  5.5x13″ / 6x15″ / 6.5x16″ / 5.5x14″ / 6x14″ / 7x17″ / 5.5x15″ / 6x16″ / 6.5x17″ / 6.5x15″
• Drilling (NxPCD):
  4×100 / 5×114.3 / 5×100 / 4×98 / 4×114.3 / 5×110 / 5×115 / 5×108 / 5×112 / 4×108 / 5×105 / 5×120
• Center Hole Diameter:
  73.1mm / 60.1mm / 66.1mm / 67.1mm / 57.1mm / 58.6mm / 56.6mm / 56.1mm / 65.1mm / 70.3mm / 63.3mm / 54.1mm / 64.1mm
• Reach (ET):
  40 / 36 / 45 mm / 40 mm / 43 mm / 38 mm / 49 mm / 35 mm / 44 mm / 48 mm / 46 mm / 37 mm / 47 mm / 50 mm / 32 mm / 41 mm / 42 mm / 52.50 mm / 27 mm / 39 mm / 36 mm / 33 mm / 51 mm / 52 mm
• Rim Diameter (D):
  13 / 15 / 16 / 14 / 17
• Rim Width (J):
  5,5 / 6,0 / 6,5 / 7,0
• Hole location diameter:
  100,0 / 114,3 / 98,0 / 110,0 / 115,0 / 108,0 / 112,0 / 105,0 / 120,0
• Center Hole Diameter (DIA):
  73,10 / 60,10 / 66,10 / 67,10 / 57,10 / 58,60 / 56,60 / 56,10 / 65,10 / 70,30 / 63,30 / 54,10 / 64,10

K&K wheels for Toyota Camry 40

K&K Spider

0 reviews

• Type:
  cast
• Material:
  light alloy
• Number of mounting holes:
  5
• Width x rim diameter (JxD):
  6.5x16″ / 7x16″ / 7x17″
• Drilling (NxPCD):
  5×112 / 5×114.3 / 5×108 / 5×100 / 5×139.7 / 6×139.7
• Center Hole Diameter:
  66.6mm / 66.1mm / 60.1mm / 67.1mm / 63.35mm / 64.1mm / 56.1mm / 57.1mm / 110.1mm / 100.1mm
• Reach (ET):
  45mm / 50mm / 43mm / 53mm / 46mm / 48mm / 55mm / 35mm / 38mm / 39mm
• Rim Diameter (D):
  16 / 17
• Rim Width (J):
  6,5 / 7,0
• Hole location diameter:
  112,0 / 114,3 / 108,0 / 100,0 / 139,7
• Center Hole Diameter (DIA):
  66,60 / 66,10 / 60,10 / 67,10 / 63,35 / 64,10 / 56,10 / 57,10 / 110,10 / 100,10

K&K Centurion

6 reviews

• Type:
  cast
• Material:
  light alloy
• Number of mounting holes:
  5
• Width x rim diameter (JxD):
  7x17″
• Drilling (NxPCD):
  5×114.3 / 5×105 / 5×100 / 5×112 / 5×108 / 5×110 / 5×115
• Center Hole Diameter:
  67.1mm / 56.6mm / 56.1mm / 66.6mm / 60.1mm / 66.1mm / 57.1mm / 71.6mm / 65.1mm / 63.35mm / 70.1mm / 64.1mm / / 70.2mm
• Reach (ET):
  35mm / 39mm / 45mm / 48mm / 50mm / 40mm / 54mm / 47mm / 34mm / 49mm / 41mm / 46mm / 55mm
• Rim Diameter (D):
  17
• Rim Width (J):
  7,0
• Hole location diameter:
  114,3 / 105,0 / 100,0 / 112,0 / 108,0 / 110,0 / 115,0
• Center Hole Diameter (DIA):
  67,10 / 56,60 / 56,10 / 66,60 / 60,10 / 66,10 / 57,10 / 71,60 / 65,10 / 63,35 / 70,10 / 64,10 / / 70,20

K&K Borelli

1 review

• Type:
  cast
• Material:
  light alloy
• Number of mounting holes:
  5
• Width x rim diameter (JxD):
  6.5x16″ / 6x15″
• Drilling (NxPCD):
  5×105 / 5×112 / 5×108 / 5×114.3 / 5×100 / 5×110 / 5×115
• Center Hole Diameter:
  56.6mm / 57.1mm / 67.1mm / 63.35mm / 66.6mm / 66.1mm / 60.1mm / 65.1mm / 70.1mm / 64.1mm / 56.1mm
• Reach (ET):
  39mm / 43mm / 46mm / 50mm / 40mm / 38mm / 45mm / 35mm / 47mm / 42mm / 41mm / 39.50mm / 48mm / 52.50mm / 49mm
• Rim Diameter (D):
  16 / 15
• Rim Width (J):
  6,5 / 6,0
• Hole location diameter:
  105,0 / 112,0 / 108,0 / 114,3 / 100,0 / 110,0 / 115,0
• Center Hole Diameter (DIA):
  56,60 / 57,10 / 67,10 / 63,35 / 66,60 / 66,10 / 60,10 / 65,10 / 70,10 / 64,10 / 56,10

K&K Andorra

13 reviews

• Type:
  cast
• Material:
  light alloy
• Number of mounting holes:
  5
• Width x rim diameter (JxD):
  6x15″ / 7x17″ / 6.5x16″ / 7.5x18″ / 7.5x17″
• Drilling (NxPCD):
  5×100 / 5×114.3 / 5×112 / 5×108 / 5×105 / 5×110 / 5×127 / 5×120 / 5×130 / 5×115
• Center Hole Diameter:
  57.1mm / 67.1mm / 66.1mm / 56.1mm / 56.6mm / 66.6mm / 60.1mm / 63.35mm / 65.1mm / 71.6mm / 72.6mm / 64.1mm / 84.1mm / 70.2mm / 70.1mm
• Reach (ET):
  38mm / 50mm / 46mm / 45mm / 40mm / 48mm / 39mm / 47mm / 49mm / 35mm / 42mm / 37mm / 55mm / 32mm / 51mm / 60 mm / 52.50 mm / 43 mm / 44 mm / 41 mm
• Rim Diameter (D):
  15 / 17 / 16 / 18
• Rim Width (J):
  6,0 / 7,0 / 6,5 / 7,5
• Hole location diameter:
  100,0 / 114,3 / 112,0 / 108,0 / 105,0 / 110,0 / 127,0 / 120,0 / 130,0 / 115,0
• Center Hole Diameter (DIA):
  57,10 / 67,10 / 66,10 / 56,10 / 56,60 / 66,60 / 60,10 / 63,35 / 65,10 / 71,60 / 72,60 / 64,10 / 84,10 / 70,20 / 70,10

K&K KS736

9 reviews

• Type:
  cast
• Material:
  light alloy
• Number of mounting holes:
  5
• Width x rim diameter (JxD):
  6.5x16″
• Drilling (NxPCD):
  5×114.3 / 5×112
• Center Hole Diameter:
  67.1mm / 66.1mm / 60.1mm / 66.6mm
• Reach (ET):
  38mm / 41mm / 40mm / 45mm
• Rim Diameter (D):
  16
• Rim Width (J):
  6,5
• Hole location diameter:
  114,3 / 112,0
• Center Hole Diameter (DIA):
  67,10 / 66,10 / 60,10 / 66,60

Venti rims for Toyota Camry 40

Venti 1603

6 reviews

• Type:
  cast
• Material:
  light alloy
• Number of mounting holes:
  4
• Width x rim diameter (JxD):
  6.5x16″
• Drilling (NxPCD):
  5×100 / 5×112 / 4×100 / 5×114.3 / 5×115 / 5×105
• Center Hole Diameter:
  60.1mm / 57.1mm / 67.1mm / 70.1mm / 56.6mm
• Reach (ET):
  37 / 45 / 41 / 42 mm / 45 mm / 37 mm / 40 mm / 39 mm
• Rim Diameter (D):
  16
• Rim Width (J):
  6,5
• Hole location diameter:
  100,0 / 112,0 / 114,3 / 115,0 / 105,0
• Center Hole Diameter (DIA):
  60,10 / 57,10 / 67,10 / 70,10 / 56,60

Proma wheels for Toyota Camry 40

Proma GT

12 reviews

• Type:
  cast
• Material:
  light alloy
• Number of mounting holes:
  4
• Width x rim diameter (JxD):
  6x15″ / 6.5x16″
• Drilling (NxPCD):
  4×100 / 4×98 / 5×114.3 / 5×110 / 5×115 / 5×108 / 4×108 / 5×100 / 5×105 / 4×114.3 / 5×112
• Center Hole Diameter:
  60.1mm / 58.6mm / 54.1mm / 67.1mm / 66.1mm / 65.1mm / 70.3mm / 63.4mm / 57.1mm / 56.6mm / 52.5mm
• Reach (ET):
  40 / 35 / 48 / 50 / 36 / 46mm / 40mm / 37mm / 41mm / 47mm / 50mm / 52.50mm / 36mm / 48mm / 26mm / 34mm / 38mm / 45 mm / 51 mm / 39 mm / 29 mm / 44 mm / 37.50 mm / 42 mm / 63.40 mm / 31 mm / 52 mm
• Rim Diameter (D):
  15 / 16
• Rim Width (J):
  6,0 / 6,5
• Hole location diameter:
  100,0 / 98,0 / 114,3 / 110,0 / 115,0 / 108,0 / 105,0 / 112,0
• Center Hole Diameter (DIA):
  60,10 / 58,60 / 54,10 / 67,10 / 66,10 / 65,10 / 70,30 / 63,40 / 57,10 / 56,60 / 52,50

Proma LeMans

3 reviews

• Type:
  cast
• Material:
  light alloy
• Number of mounting holes:
  4
• Width x rim diameter (JxD):
  6.5x15″ / 6.5x16″ / 7.5x18″ / 5.5x14″
• Drilling (NxPCD):
  4×100 / 5×112 / 5×108 / 5×114.3 / 5×100 / 4×114.3 / 4×98 / 5×120 / 5×110 / 4×108
• Center Hole Diameter:
  67.1mm / 57.1mm / 63.3mm / 56.1mm / 54.1mm / 60.1mm / 56.6mm / 58.6mm / 63.4mm / 66.1mm / 72.6mm / 65.1mm / 64.1mm / 66.6mm
• Reach (ET):
  45 / 43 mm / 50 mm / 40 mm / 38 mm / 48 mm / 41 mm / 44 mm / 49 mm / 52.50 mm / 45 mm / 35 mm / 51 mm / 32 mm / 46 mm / 52 mm / 34 mm / 37 mm / 47.50 mm / 47 mm / 42 mm / 36 mm / 29 mm
• Rim Diameter (D):
  15 / 16 / 18 / 14
• Rim Width (J):
  6,5 / 7,5 / 5,5
• Hole location diameter:
  100,0 / 112,0 / 108,0 / 114,3 / 98,0 / 120,0 / 110,0
• Center Hole Diameter (DIA):
  67,10 / 57,10 / 63,30 / 56,10 / 54,10 / 60,10 / 56,60 / 58,60 / 63,40 / 66,10 / 72,60 / 65,10 / 64,10 / 66,60

Yamato wheels for Toyota Camry 40

Yamato Ashikaga Esinori

3 reviews

• Type:
  cast
• Material:
  light alloy
• Number of mounting holes:
  5
• Width x rim diameter (JxD):
  8.5x19″ / 7.5x18″ / 6x15″ / 7x17″ / 6.5x16″ / 7x18″ / 8x18″ / 6.5x15″ / 6.5x17″
• Drilling (NxPCD):
  5×112 / 5×105 / 5×114.3 / 5×108 / 5×110 / 5×100 / 4×98 / 4×100 / 5×115 / 4×114.3 / 5×114
• Center Hole Diameter:
  66.6mm / 56.6mm / 60.1mm / 66.1mm / 63.3mm / 57.1mm / 65.1mm / 67.1mm / 56.1mm / 58.6mm / 54.1mm / 70.1mm
• Reach (ET):
  43 / 42 / 39 mm / 32 mm / 47 mm / 45 mm / 35 mm / 50 mm / 43 mm / 42 mm / 40 mm / 37 mm / 46 mm / 48 mm / 49 mm / 44 mm
• Rim Diameter (D):
  19 / 18 / 15 / 17 / 16
• Rim Width (J):
  8,5 / 7,5 / 6,0 / 7,0 / 6,5 / 8,0
• Hole location diameter:
  112,0 / 105,0 / 114,3 / 108,0 / 110,0 / 100,0 / 98,0 / 115,0 / 114,0
• Center Hole Diameter (DIA):
  66,60 / 56,60 / 60,10 / 66,10 / 63,30 / 57,10 / 65,10 / 67,10 / 56,10 / 58,60 / 54,10 / 70,10

Yamato Goro-Tokimine

2 reviews

• Type:
  cast
• Material:
  light alloy
• Number of mounting holes:
  5
• Width x rim diameter (JxD):
  7x17″ / 7.5x18″ / 8x18″ / 8.5x19″ / 9x20″ / 7.5x17″ / 7.5x19″ / 4.5x17″ / 6.5x15″ / 6x14″ / 6x15″ / 6.5x16″
• Drilling (NxPCD):
  5×108 / 5×114.3 / 5×100 / 5×112 / 5×120 / 5×130 / 5×115 / 4×98 / 4×100 / 4×108 / 5×105 / 4×114.3
• Center Hole Diameter:
  63.3mm / 66.1mm / 56.1mm / 60.1mm / 67.1mm / 57.1mm / 73.1mm / 66.6mm / 72.6mm / 71.6mm / 70.1mm / 64.1mm / 58.6mm / 56.6mm / 54.1mm
• Reach (ET):
  50 / 45 / 48 mm / 45 mm / 35 mm / 42 mm / 43 mm / 39 mm / 40.50 mm / 40 mm / 38 mm / 50 mm / 56 mm / 53 mm / 60 mm / 47 mm / 55 mm / 41 mm / 32 mm / 52.50 mm
• Rim Diameter (D):
  17 / 18 / 19 / 20 / 15 / 14 / 16
• Rim Width (J):
  7,0 / 7,5 / 8,0 / 8,5 / 9,0 / 4,5 / 6,5 / 6,0
• Hole location diameter:
  108,0 / 114,3 / 100,0 / 112,0 / 120,0 / 130,0 / 115,0 / 98,0 / 105,0
• Center Hole Diameter (DIA):
  63,30 / 66,10 / 56,10 / 60,10 / 67,10 / 57,10 / 73,10 / 66,60 / 72,60 / 71,60 / 70,10 / 64,10 / 58,60 / 56,60 / 54,10

SKAD car wheels for Toyota Camry 40

SKAD Melbourne

11 reviews

• Type:
  cast
• Material:
  light alloy
• Number of mounting holes:
  5
• Width x rim diameter (JxD):
  7x17″
• Drilling (NxPCD):
  5×112 / 5×114.3 / 5×105 / 5×108
• Center Hole Diameter:
  57.1mm / 67.1mm / 56.7mm / 66.1mm / 60.1mm / 63.3mm / 66.6mm
• Reach (ET):
  40mm / 50mm / 42mm / 45mm / 48.50mm / 39mm / 43mm / 47mm
• Rim Diameter (D):
  17
• Rim Width (J):
  7,0
• Hole location diameter:
  112,0 / 114,3 / 105,0 / 108,0
• Center Hole Diameter (DIA):
  57,10 / 67,10 / 56,70 / 66,10 / 60,10 / 63,30 / 66,60

SKAD Shark

4 reviews

• Type:
  cast
• Material:
  light alloy
• Number of mounting holes:
  4
• Width x rim diameter (JxD):
  6x16″ / 5.5x14″ / 5x14″ / 6.5x16″ / 6x15″ / 7x16″
• Drilling (NxPCD):
  4×114.3 / 5×100 / 4×98 / 5×114.3 / 5×112 / 4×100 / 4×108 / 5×114 / 4×112
• Center Hole Diameter:
  67.1mm / 57.1mm / 58.6mm / 60.1mm / 54.1mm / 56.6mm / 66.1mm / 56mm / 58mm / 63.3mm
• Reach (ET):
  46mm / 35mm / 45mm / 50mm / 51mm / 52mm / 54mm / 39mm / 43mm / 49mm / 38mm / 47mm
• Rim Diameter (D):
  16 / 14 / 15
• Rim Width (J):
  6,0 / 5,5 / 5,0 / 6,5 / 7,0
• Hole location diameter:
  114,3 / 100,0 / 98,0 / 112,0 / 108,0 / 114,0
• Center Hole Diameter (DIA):
  67,10 / 57,10 / 58,60 / 60,10 / 54,10 / 56,60 / 66,10 / 56,00 / 58,00 / 63,30

SKAD Veritas

34 reviews

• Type:
  cast
• Material:
  light alloy
• Number of mounting holes:
  4
• Width x rim diameter (JxD):
  5.5x14″ / 6.5x16″ / 6x15″ / 5.5x13″ / 6.5x15″ / 5x14″ / 6x14″ / 6x16″ / 5x15″
• Drilling (NxPCD):
  4×100 / 4×98 / 4×114.3 / 5×112 / 5×114.3 / 5×100 / 4×108 / 5×105 / 5×98 / 5×108 / 6×108 / 5×110
• Center Hole Diameter:
  67.1mm / 58.6mm / 57.1mm / 54.1mm / 60.1mm / 66.1mm / 63.3mm / 56.6mm / 56.7mm / 66.6mm / 63.35mm / 63.4mm / 65.1mm / 56.1mm
• Reach (ET):
  35mm / 45mm / 38mm / 47mm / 48mm / 39mm / 43mm / 47.50mm / 46mm / 50mm / 60mm / 52.50mm / 40mm / 52mm / 4mm
• Rim Diameter (D):
  14 / 16 / 15 / 13
• Rim Width (J):
  5,5 / 6,5 / 6,0 / 5,0
• Hole location diameter:
  100,0 / 98,0 / 114,3 / 112,0 / 108,0 / 105,0 / 110,0
• Center Hole Diameter (DIA):
  67,10 / 58,60 / 57,10 / 54,10 / 60,10 / 66,10 / 63,30 / 56,60 / 56,70 / 66,60 / 63,35 / 63,40 / 65,10 / 56,10

SKAD Legend

5 reviews

• Type:
  cast
• Material:
  light alloy
• Number of mounting holes:
  5
• Width x rim diameter (JxD):
  7x17″ / 5x17″
• Drilling (NxPCD):
  5×114.3 / 5×100 / 5×105 / 5×112 / 5×108 / 5×115
• Center Hole Diameter:
  67.1mm / 60.1mm / 56.7mm / 57.1mm / 66.1mm / 66.6mm / 70.2mm / 34mm
• Reach (ET):
  41 / 45 mm / 41 mm / 43 mm / 40 mm / 39 mm / 46 mm / 12 mm
• Rim Diameter (D):
  17
• Rim Width (J):
  7,0 / 5,0
• Hole location diameter:
  114,3 / 100,0 / 105,0 / 112,0 / 108,0 / 115,0
• Center Hole Diameter (DIA):
  67,10 / 60,10 / 56,70 / 57,10 / 66,10 / 66,60 / 70,20 / 34,00

SKAD Selena

0 reviews

• Type:
  cast
• Material:
  light alloy
• Number of mounting holes:
  5
• Width x rim diameter (JxD):
  7x17″ / 5.5x14″ / 6.5x16″ / 6x15″ / 7x18″ / 9x20″ / 6x14″ / 7x16″ / 5.5x13″ / 7.5x17″ / 7.5x18″ / 5. 5x15″ / 8x18″ / 6x16″ / 5x13″ / 6.5x15″ / 6.5x17″ / 7x15″ / 8.5x19″ / 5x14″ / 7.5x16″
• Drilling (NxPCD):
  5×114.3 / 4×98 / 5×112 / 5×100 / 5×120 / 5×108 / 4×100 / 5×139.7 / 5×130 / 4×108 / 4×114.3 / 5×105 / 5×110 / 6×139.7 / 5×127 / 5×115 / 6×114.3
• Center Hole Diameter:
  60.1mm / 58.6mm / 67.1mm / 66.1mm / 57.1mm / 66.6mm / 74.1mm / 63.4mm / 109.7mm / 98.5mm / 56.6mm / 54.1mm / 84.1mm / 65.1mm / 56.1mm / 56.7 mm / 72.6 mm / 63.35 mm / 71.6 mm / 70.2 mm / 63.3 mm / 71.5 mm / / 54 mm / 95.3 mm / 58.5 mm / 58.1 mm / 106.2 mm / 64.1 mm / 72.5 mm / 84 mm
• Reach (ET):
  39mm / 35mm / 38mm / 50mm / 45mm / 47mm / 40mm / 46mm / 43mm / 32mm / 48mm / 41mm / 37.50mm / 37mm / 52mm / 33mm / 42mm / 30mm / 52.50mm / 54mm / 36mm / 49mm / 55mm / 57mm / 44mm / 51mm / 26mm / 27mm / 20mm / 34mm
• Rim Diameter (D):
  17 / 14 / 16 / 15 / 18 / 20 / 13 / 19
• Rim Width (J):
  7,0 / 5,5 / 6,5 / 6,0 / 9,0 / 7,5 / 8,0 / 5,0 / 8,5
• Hole location diameter:
  114,3 / 98,0 / 112,0 / 100,0 / 120,0 / 108,0 / 139,7 / 130,0 / 105,0 / 110,0 / 127,0 / 115,0
• Center Hole Diameter (DIA):
  60,10 / 58,60 / 67,10 / 66,10 / 57,10 / 66,60 / 74,10 / 63,40 / 109,70 / 98,50 / 56,60 / 54,10 / 84,10 / 65,10 / 56,10 / 56,70 / 72,60 / 63,35 / 71,60 / 70,20 / 63,30 / 71,50 / / 54,00 / 95,30 / 58,50 / 58,10 / 106,20 / 64,10 / 72,50 / 84,00

X'trike wheels for Toyota Camry 40

X'trike X-119

5 reviews

• Type:
  cast
• Material:
  light alloy
• Number of mounting holes:
  5
• Width x rim diameter (JxD):
  6.5x16″ / 6.5x15″
• Drilling (NxPCD):
  5×112 / 5×114.3 / 5×100 / 5×108 / 5×115 / 5×110 / 5×105
• Center Hole Diameter:
  66.6mm / 57.1mm / 66.1mm / 67.1mm / 60.1mm / 70.2mm / 65.1mm / 56.6mm
• Reach (ET):
  33 / 45 / 40 / 38 / 43 / 35 / 45 mm / 40 mm / 33 mm / 41 mm / 43 mm / 35 mm / 37 mm / 38 mm
• Rim Diameter (D):
  16 / 15
• Rim Width (J):
  6,5
• Hole location diameter:
  112,0 / 114,3 / 100,0 / 108,0 / 115,0 / 110,0 / 105,0
• Center Hole Diameter (DIA):
  66,60 / 57,10 / 66,10 / 67,10 / 60,10 / 70,20 / 65,10 / 56,60

X'trike X-120

4 reviews

• Type:
  cast
• Material:
  light alloy
• Number of mounting holes:
  5
• Width x rim diameter (JxD):
  7x17″
• Drilling (NxPCD):
  5×100 / 5×115 / 5×114.3 / 5×112 / 5×108 / 5×105 / 5×110
• Center Hole Diameter:
  67.1mm / 70.2mm / 66.6mm / 60.1mm / 63.35mm / 66.1mm / 56.6mm / 65.1mm
• Reach (ET):
  45 / 43 / 35 / 38 mm / 40 mm / 35 mm / 45 mm / 33 mm / 43 mm / 39 mm
• Rim Diameter (D):
  17
• Rim Width (J):
  7,0
• Hole location diameter:
  100,0 / 115,0 / 114,3 / 112,0 / 108,0 / 105,0 / 110,0
• Center Hole Diameter (DIA):
  67,10 / 70,20 / 66,60 / 60,10 / 63,35 / 66,10 / 56,60 / 65,10

X'trike X-117

4 reviews

• Type:
  cast
• Material:
  light alloy
• Number of mounting holes:
  5
• Width x rim diameter (JxD):
  6.5x16″ / 7x16″
• Drilling (NxPCD):
  5×114.3 / 5×100 / 5×108 / 5×115 / 5×112 / 5×110 / 5×105
• Center Hole Diameter:
  67.1mm / 66.1mm / 70.1mm / 57.1mm / 66.6mm / 60.1mm / 65.1mm / 56.6mm
• Reach (ET):
  45mm / 40mm / 38mm / 35mm / 43mm / 41mm / 33mm / 37mm
• Rim Diameter (D):
  16
• Rim Width (J):
  6,5 / 7,0
• Hole location diameter:
  114,3 / 100,0 / 108,0 / 115,0 / 112,0 / 110,0 / 105,0
• Center Hole Diameter (DIA):
  67,10 / 66,10 / 70,10 / 57,10 / 66,60 / 60,10 / 65,10 / 56,60

Cross Street rims for Toyota Camry 40

Cross Street Y-5314

1 review

• Type:
  cast
• Material:
  light alloy
• Number of mounting holes:
  4
• Width x rim diameter (JxD):
  6.5x16″ / 5.5x14″ / 6x15″
• Drilling (NxPCD):
  5×108 / 4×100 / 5×112 / 5×114.3 / 4×114.3 / 4×98 / 4×108 / 5×100 / 5×105 / 5×115
• Center Hole Diameter:
  63.3mm / 56.6mm / 57.1mm / 66.1mm / 67.1mm / 60.1mm / 54.1mm / 58.6mm / 65.1mm / 70.1mm
• Reach (ET):
  50 / 49 / 33 / 40 / 44 / 39 / 38 / 48 / 36mm / 35mm / 45mm / 31mm / 50mm / 40mm / 52mm / 39mm / 47mm / 46mm / 26 mm / 42 mm / 37.50 mm / 48 mm / 41 mm / 38 mm
• Rim Diameter (D):
  16 / 14 / 15
• Rim Width (J):
  6,5 / 5,5 / 6,0
• Hole location diameter:
  108,0 / 100,0 / 112,0 / 114,3 / 98,0 / 105,0 / 115,0
• Center Hole Diameter (DIA):
  63,30 / 56,60 / 57,10 / 66,10 / 67,10 / 60,10 / 54,10 / 58,60 / 65,10 / 70,10

Mak wheels for Toyota Camry 40

Mak Zenith

4 reviews

• Type:
  cast
• Material:
  light alloy
• Number of mounting holes:
  4
• Width x rim diameter (JxD):
  8x17″ / 6.5x16″ / 6.5x15″ / 8x19″ / 7x16″ / 7x17″ / 7x18″ / 8x18″ / 7.5x18″ / 6x16″ / 6x15″ / 5.5x15 ″ / 5x15″ / 6.5x17″ / 4.5x14″ / 7.5x17″ / 5.5x14″ / 4.5x15″ / 9x18″ / 7.5x16″
• Drilling (NxPCD):
  5×112 / 4×100 / 5×114.3 / 5×108 / 5×120 / 5×100 / 4×108 / 5×105 / 4×98 / 5×127 / 5×115 / 5×110 / 5×98 / 5×114 / 4×114.3
• Center Hole Diameter:
  57.1mm / 72mm / 76mm / 72.6mm / 56.1mm / 67.1mm / 63.4mm / 56.6mm / 58.1mm / 60.1mm / 65.1mm / 71.6mm / 70.2mm / 54.1mm / 64.1mm / 70.1 mm / 66.6 mm / 63.3 mm / 66.45 mm / 66.1 mm / 74.1 mm
• Reach (ET):
  50 / 35 / 40 mm / 30 mm / 42 mm / 45 mm / 50 mm / 44 mm / 48 mm / 34 mm / 41 mm / 35 mm / 38 mm / 37 mm / 25 mm / 15 mm / 47 mm / 32 mm / 39 mm / 31 mm / 48.50 mm / 43 mm / 37.50 mm / 20 mm / 16 mm / 36 mm / 18 mm / 46 mm / 53 mm / 19 mm
• Rim Diameter (D):
  17 / 16 / 15 / 19 / 18 / 14
• Rim Width (J):
  8,0 / 6,5 / 7,0 / 7,5 / 6,0 / 5,5 / 5,0 / 4,5 / 9,0
• Hole location diameter:
  112,0 / 100,0 / 114,3 / 108,0 / 120,0 / 105,0 / 98,0 / 127,0 / 115,0 / 110,0 / 114,0
• Center Hole Diameter (DIA):
  57,10 / 72,00 / 76,00 / 72,60 / 56,10 / 67,10 / 63,40 / 56,60 / 58,10 / 60,10 / 65,10 / 71,60 / 70,20 / 54,10 / 64,10 / 70,10 / 66,60 / 63,30 / 66,45 / 66,10 / 74,10

Mak Fuoco 5

0 reviews

• Type:
  cast
• Material:
  light alloy
• Number of mounting holes:
  5
• Width x rim diameter (JxD):
  8x18″ / 8.5x19″ / 9.5x20″ / 8x17″ / 6.5x16″ / 9x18″ / 9x22″ / 10x22″ / 9.5x19″ / 8.5x20″ / 8x19″ / 6 .5x15″ / 7x16″ / 7.5x17″ / 8x20″ / 7x17″ / 7.5x18″ / 10.5x20″ / 10x20″ / 6x16″ / 6x15″
• Drilling (NxPCD):
  5×127 / 5×114.3 / 5×112 / 5×130 / 5×150 / 5×120 / 5×108 / 5×160 / 5×118 / 5×114 / 5×105 / 5×115 / 5×100 / 6×114.3
• Center Hole Diameter:
  71.6mm / 76mm / 66.1mm / 110.2mm / 72.6mm / 72mm / 60.1mm / 65.1mm / 71.1mm / 74.1mm / 84.1mm / 78.1mm / 66.6mm / 56.6mm / 64.1mm / 66.5 mm / 56.1 mm / 70.1 mm / 70.2 mm / 67.1 mm
• Reach (ET):
  40 / 35 / 30 / 45 / 45 mm / 40 mm / 48 mm / 52 mm / 35 mm / 20 mm / 49 mm / 50 mm / 47 mm / 53 mm / 65 mm / 68 mm / 30 mm / -10 mm / 32 mm / 55 mm / 38 mm / 15 mm / 60 mm / 42 mm / 58 mm / 43 mm
• Rim Diameter (D):
  18 / 19 / 20 / 17 / 16 / 22 / 15
• Rim Width (J):
  8,0 / 8,5 / 9,5 / 6,5 / 9,0 / 10,0 / 7,0 / 7,5 / 10,5 / 6,0
• Hole location diameter:
  127,0 / 114,3 / 112,0 / 130,0 / 150,0 / 120,0 / 108,0 / 160,0 / 118,0 / 114,0 / 105,0 / 115,0 / 100,0
• Center Hole Diameter (DIA):
  71,60 / 76,00 / 66,10 / 110,20 / 72,60 / 72,00 / 60,10 / 65,10 / 71,10 / 74,10 / 84,10 / 78,10 / 66,60 / 56,60 / 64,10 / 66,50 / 56,10 / 70,10 / 70,20 / 67,10

DEZENT car wheels for Toyota Camry 40

DEZENT TX

19 reviews

• Type:
  cast
• Material:
  light alloy
• Number of mounting holes:
  4
• Width x rim diameter (JxD):
  6.5x16″ / 7.5x17″ / 7.5x18″ / 6x15″ / 7x16″ / 8x17″ / 7x17″ / 8x18″ / 5.5x14″ / 6.5x17″ / 5.5x15″
• Drilling (NxPCD):
  4×108 / 5×112 / 5×114.3 / 5×100 / 5×108 / 4×100 / 5×120 / 5×115 / 5×105 / 5×98 / 4×98 / 5×110
• Center Hole Diameter:
  63.4mm / 70.1mm / 71.6mm / 57.1mm / 67.1mm / 60.1mm / 72.6mm / 70.2mm / 66.6mm / 66.1mm / 65.1mm / 63.3mm / 56.6mm / 56.1mm / 54.1mm / 64.1 mm / 58.1 mm
• Reach (ET):
  40 / 48 / 38 / 46 / 38 mm / 45 mm / 40 mm / 50 mm / 43 mm / 48.50 mm / 44 mm / 31 mm / 35 mm / 39 mm / 46 mm / 48 mm / 42.50 mm / 25 mm / 42 mm / 32 mm / 41 mm / 34 mm / 33 mm / 28 mm / 27 mm / 52 mm / 30 mm / 52.50 mm / 37 mm / 15 mm / 16 mm / 51 mm / 49 mm / 47 mm / 36 mm / 53 mm / 55 mm / 23 mm
• Rim Diameter (D):
  16 / 17 / 18 / 15 / 14
• Rim Width (J):
  6,5 / 7,5 / 6,0 / 7,0 / 8,0 / 5,5
• Hole location diameter:
  108,0 / 112,0 / 114,3 / 100,0 / 120,0 / 115,0 / 105,0 / 98,0 / 110,0
• Center Hole Diameter (DIA):
  63,40 / 70,10 / 71,60 / 57,10 / 67,10 / 60,10 / 72,60 / 70,20 / 66,60 / 66,10 / 65,10 / 63,30 / 56,60 / 56,10 / 54,10 / 64,10 / 58,10

DEZENT TZ

5 reviews

• Type:
  cast
• Material:
  light alloy
• Number of mounting holes:
  4
• Width x rim diameter (JxD):
  6x15″ / 6.5x16″ / 8x18″ / 7.5x18″ / 7x17″ / 8x19″ / 7.5x17″ / 7x16″ / 8x17″ / 6x16″ / 7.5x19″ / 6.5x 17″ / 7x18 ″
• Drilling (NxPCD):
  4×100 / 5×114.3 / 5×112 / 5×108 / 4×108 / 5×105 / 5×100 / 5×110 / 5×98 / 5×115 / 4×98
• Center Hole Diameter:
  60.1mm / 71.6mm / 66.6mm / 70.1mm / 54.1mm / 66.1mm / 67.1mm / 63.4mm / 57.1mm / 56.6mm / 65.1mm / 58.1mm / 70.2mm
• Reach (ET):
  38 / 48 / 46 / 40 / 45 / 45 mm / 40 mm / 42.50 mm / 35 mm / 50.50 mm / 47 mm / 30 mm / 39 mm / 43 mm / 48 mm / 50 mm / 38 mm / 33 mm / 52.50 mm / 46 mm / 36 mm / 48.50 mm / 52 mm / 44 mm / 34 mm / 29 mm / 37 mm / 32 mm / 42 mm / 25 mm / 51 mm / 15 mm / 49 mm / 54 mm / 41 mm / 57 mm / 23 mm / 40.50 mm / 31 mm / 55 mm / 22 mm / 53 mm / 20 mm
• Rim Diameter (D):
  15 / 16 / 18 / 17 / 19
• Rim Width (J):
  6,0 / 6,5 / 8,0 / 7,5 / 7,0
• Hole location diameter:
  100,0 / 114,3 / 112,0 / 108,0 / 105,0 / 110,0 / 98,0 / 115,0
• Center Hole Diameter (DIA):
  60,10 / 71,60 / 66,60 / 70,10 / 54,10 / 66,10 / 67,10 / 63,40 / 57,10 / 56,60 / 65,10 / 58,10 / 70,20

Yokatta rims for Toyota Camry 40

Yokatta Model-32

3 reviews

• Type:
  cast
• Material:
  light alloy
• Number of mounting holes:
  6
• Width x rim diameter (JxD):
  6.5x16″ / 6x15″ / 7x17″ / 7x18″ / 6.5x15″ / 6x16″
• Drilling (NxPCD):
  5×112 / 4×100 / 5×105 / 5×114.3 / 5×110 / 5×115 / 5×100 / 4×98 / 4×108 / 5×108 / 4×114.3
• Center Hole Diameter:
  57.1mm / 54.1mm / 56.6mm / 67.1mm / 65.1mm / 60.1mm / 70.1mm / 56.1mm / 66.1mm / 64.1mm / 58.6mm / 63.3mm
• Reach (ET):
  33 / 48 / 42 mm / 52 mm / 38 mm / 39 mm / 50 mm / 45 mm / 48 mm / 43 mm / 47 mm / 40 mm / 36 mm / 35 mm / 31 mm / 37 mm / 46 mm / 55 mm / 41 mm
• Rim Diameter (D):
  16 / 15 / 17 / 18
• Rim Width (J):
  6,5 / 6,0 / 7,0
• Hole location diameter:
  112,0 / 100,0 / 105,0 / 114,3 / 110,0 / 115,0 / 98,0 / 108,0
• Center Hole Diameter (DIA):
  57,10 / 54,10 / 56,60 / 67,10 / 65,10 / 60,10 / 70,10 / 56,10 / 66,10 / 64,10 / 58,60 / 63,30

Also on topic:

TOP-X: Rating of chargers for car batteries with short circuit protection %%year%% of the year

TOP-X: Rating of chargers for car batteries with short circuit protection %%year%% of the year

TOP-X: Rating of chargers for car batteries with overload protection %%year%% of the year

TOP-X: Rating of chargers for car batteries with overload protection %%year%% of the year

TOP-X: Rating of chargers for car batteries with Powerbank %%year%% of the year

TOP-X: Rating of chargers for car batteries with Powerbank %%year%% of the year

TOP-X: Rating of chargers for car batteries with automatic shutdown of charging%%year%% of the year
TOP-X: Rating of chargers for car batteries with automatic shutdown of charging%%year%% of the year