2019 Toyota Land Cruiser 200 (Toyota Land Cruiser 200) photo:
Contents
hide
1 2021 Toyota Land Cruiser 200 (Toyota Land Cruiser 200) photo:
2 2021 Toyota Land Cruiser 200 exterior:
3 2021 Toyota Land Cruiser 200 specifications:
4 2021 Toyota Land Cruiser 200 price:
5 2021 Toyota Land Cruiser 200 video review: 5.1 Other new cars:
“Filling” - technical characteristics
The designers expanded the car's wheelbase to 2850 and made changes to its chassis and technical characteristics:
- stabilization of lateral stability;
- all-wheel drive;
- The front suspension is represented by an independent spring system, and the rear suspension is dependent;
- ventilated disc brakes;
- direct fuel injection system with intercooler;
- five driving modes that allow you to distribute torque across the axles.
In Russia, the car is equipped with two engine options: atmospheric gasoline and turbodiesel.
The gasoline engine will appeal to fans of energetic driving and maneuvers. Its volume is 4.6 liters, power 309 liters. s., and the maximum torque is 460 Nm. The engine reaches a maximum speed of 195 km/h in 8.6 seconds, and it must be refueled with gasoline with an octane rating of at least 91. The city consumption of such an engine is 18.2 liters per 100 km, and outside the city the consumption drops to 11.4 liters
The diesel turbo engine has less power. Its volume is 4.5 liters and its power is 249 hp. With. The diesel engine produces maximum torque of up to 650 Nm, and this is enough to accelerate to 210 km/h. Diesel consumption in the city will be 12 liters per 100 km, and outside the city - 9 liters.
In all trim levels, the engine is complemented by a 6-speed automatic transmission.
2019 Toyota Land Cruiser 200 specifications:
The trunk volume is 909 liters. 2021 Toyota Land Cruiser 200 technical specifications: The updated Toyota Land Cruiser 2019 model year is equipped with a 4.5-liter diesel engine with a capacity of 249 horsepower , as well as a 4.6-liter gasoline engine with a capacity of 309 horses. The drive and transmission options are all-wheel drive with a six-speed automatic transmission.
Acceleration from 0 to 100 km/h with the 4.6-liter power plant is just 8.6 seconds, and the top speed reaches 195 km/h. This engine consumes 13.9 liters of fuel per 100 km (average value). Acceleration from 0 to 100 km/h for the second 4.5-liter unit is 8.9 seconds, and the top speed reaches a limit of 190 km/h. Fuel consumption is 10.2 liters per 100 km.
Technical characteristics of Land Cruiser 100
Weight data for Land Cruiser 100 with different engines. The indicated weight is approximate.
| Volume, engine, fuel, gearbox | Weight (kg) | Load capacity (kg) | Gross weight (kg) maximum |
| 4.2 1HZ, diesel, manual transmission 1998-2002 | 2650 | 610 | 3260 |
| 4.2 1HZ, diesel manual transmission, 2002-2007 | 2400 | 760 | 3160 |
| 4.2 1HD-FTE, diesel, 5 manual transmission or 4/5 automatic transmission | 2450 | 990 | 3360 |
| 4.7 2UZ-FE, gasoline, 4/5 automatic transmission | 2270 | 990 | 3260 |
Parameters of Land Cruiser 100 with gasoline engine and diesel engines. After restyling, these characteristics did not change much.
| Characteristics | 4.2, 1HZ, diesel, 5 manual transmission | 4.2, 1HD-FTE, turbodiesel, 5 manual transmission | 4.2, 1HD-FTV, turbodiesel, 4automatic transmission | V8 4.7, 2UZ-FE, gasoline, 4 automatic transmission |
| Acceleration from 0 to 100 km/h (sec.) | 16,9 | 13,6 | 13,1 | 10,7 |
| Maximum speed (km/h) | 155 | 170 | 175 | 175 |
| Power (hp) | 131 | 204 | 204 | 235 |
| Torque(N/m) | 280 | 430 | 430 | 434 |
| Compression ratio | 22,4 | 18,8 | 18,8 | 9,6 |
| Ecological level | — | — | — | — |
| Consumption in the city (l/100 km) | 14,1 | 14 | 15,8 | 22,4 |
| Consumption on the highway (l/100 km) | 10,8 | 9,4 | 10,8 | 13,3 |
| Mixed consumption (l/100 km) | 11,1 | 11,1 | 12,6 | 16,6 |
Dimensions and volumes of Toyota Land Cruiser 100 before restyling.
| Characteristic | Magnitude |
| Length(cm) | 489 |
| Width(cm) | 194 |
| Height (cm) | 192 |
| Ground clearance (mm) | 240 |
| Wheelbase (cm) | 285 |
| Trunk volume (l) | 830 1370 |
| Tank volume (l) | 96 |
Updated Toyota Land Cruiser 200 interior and exterior
— For vehicles with an additional fuel tank, if the fuel pump does not work, disconnect the fuel return line and drain the fuel from the channel shown in the figure. From November 1, 2019, for all Toyota cars imported into the Russian Federation and produced in the Russian Federation Toyota Motor LLC, Toyota Motor LLC is issuing an electronic vehicle passport, then EPTS, instead of paper vehicle passports, then PTS, in accordance with current legislation Russian Federation.
How to properly turn on the all-wheel drive system of Toyota Land Cruiser 200
To enable all-wheel drive on the Land Cruiser 200, you need to find a control switch in the car. It looks like a round switch. It is located on the right side of the steering wheel, at the bottom of the control system. It is this switch that turns the drive of the Toyota Land Cruiser on and off.
Block 4 HP in the Toyota Land Cruiser 200 has only two operating modes and is switched by turning the arrow to one of two positions. 1 position is called H4 and the other L4. Each of them has personal aspects:
- H4 is called the high speed phase. It is turned on when driving in the city or on a flat dirt road, without obvious holes, bumps, or potholes.
- L4 is the low speed phase. It is better to turn it on when driving up a hill, descending a slope with a large angle, driving in mud, or on uneven roads. That is, it is used only in unfavorable conditions.
How to switch a Land Cruiser from position H4 to L4:
- Stop the movement of the car. Shifting without stopping is dangerous.
- On the gearbox, move the lever to neutral position.
- Turn the switch clockwise all the way to the right. You can't leave the arrow in the middle.
- Wait for the indicator to turn on, indicating that the drive gear is in a lower gear.
When switching vice versa from position L4 to H4, the same procedure is performed, but the switch must be turned completely counterclockwise, to the left.
Engines Toyota Land Cruiser 200
1VD-FTV 4.5 V8 249 hp
A 4.5-liter diesel engine with the index 1VD-FTV has been installed on the Land Cruiser since 2007. This is one of the first Toyota engines in the V8 configuration. The latest version of the power unit develops a power of 249 hp. and torque 650 Nm. The engine design includes a cast iron cylinder block, a 32-valve timing system with two camshafts per cylinder bank (DOHC) and a chain drive, two variable geometry turbines, a Common Rail injection system with electromagnetic injectors, and two particulate filters.
1UR-FE 4.6 V8 309 hp
The 1UR-FE petrol engine was introduced in its homeland in 2009, replacing the 4.7-liter 2UZ-FE unit. Equipped with two camshafts (DOHC, 32 valves), Dual VVT-i system, ACIS system (change in intake manifold geometry), ETCS-i system (electronic throttle control), EGR.
| Parameter | 4.5 TD 249 hp | 4.6 309 hp |
| Engine code | 1VD-FTV | 1UR-FE |
| engine's type | diesel turbocharged | petrol without turbocharging |
| Supply system | Common Rail direct injection, two camshafts (DOHC), timing chain drive | distributed injection, dual electronic valve timing control system Dual VVT-i, two camshafts (DOHC), timing chain drive |
| Number of cylinders | 8 | |
| Cylinder arrangement | V-shaped | |
| Number of valves | 32 | |
| Cylinder diameter, mm | 86.0 | 94.0 |
| Piston stroke, mm | 96.0 | 83.0 |
| Compression ratio | 16.8:1 | 10.2:1 |
| Working volume, cubic meters cm. | 4461 | 4608 |
| Power, hp (at rpm) | 249 (2800-3600) | 309 (5500) |
| Torque, N*m (at rpm) | 650 (1600-2600) | 439 (3400) |
All-wheel drive error: causes and solution
The main all-wheel drive errors in the Toyota Land Cruiser 200 include 3 situations:
- wiring problem (broken wires);
- problem with the clutch;
- oxidation of fastening contacts;
- disruption of the inhibitor;
It is not recommended to fix the problem on your own, and especially without experience. The solution for a new car is to have the damaged part replaced under warranty at the dealers.
The all-wheel drive system of the Toyota Land Cruiser helps distribute loads more evenly between parts of the vehicle. But you need to familiarize yourself in advance with information about the connection features of this system, possible errors that often appear when the TLC is used incorrectly. These malfunctions often require the intervention of specialists at a service station; they can rarely be solved or prevented on their own.
RazmerKuzova
We offer information about the control body dimensions of cars, the location of control points for restoring the geometry of the car body.
The data is selected from reliable sources: technological maps for specialized stocks, databases for body work, official repair manuals (Body Repair Manual, Collision Repair Manual).
To obtain data on the car you are interested in, you must select the make and model from the list. After reviewing the sketches of reduced sizes, you can place an order using a payment method convenient for you. Payment by bank cards VISA, MASTERCARD, MIR
using payment systems
PayPal
,
PayAnyWay
, YuMoney (formerly Yandex Money), QIWI.
After payment, the system automatically generates a link to download files (valid for 72 hours) and sends it by email to the payer. The cost of the information package is 600 rubles.
Payment is possible directly to your YuMoney account (Yandex Money), QIWI wallet, WebMoney or to a Sberbank card (data will be sent upon request).
At the same time, the order is processed manually and the download link is sent within a day. Please inform us about the contents of the order and the fact of payment by email [email protected]
.
Your order will be processed manually. Individual selection of data is possible. If you do not find the car you need in the list, write to [email protected]
. When ordering, you must provide the most complete information about the car: make, model, year of manufacture, body type, preferably VIN. The necessary information will be searched and a letter will be sent indicating the presence or absence of the necessary data. A GUARANTEE of our integrity is that the work on selecting information is carried out BEFORE receiving payment (it is possible to send a reduced sketch to confirm the work done) and it makes no sense for us NOT to send the already found data to the customer. On the day payment is received, a letter is sent with information about your car. The cost of the information package is also 700 rubles. The data package may contain information about the geometric dimensions of your car with reference to the slipway and/or control points for restoration and/or dimensions of openings. The completeness of the data depends on the availability of information on the vehicle in existing databases.
In case of an erroneous payment, the refund is made strictly to the card from which the payment was made.
