Replacing the fuel filter Toyota Camry v50; let's get to know all the nuances

While operating a Toyota Camry, car owners may notice that the engine has begun to run unevenly, fuel consumption has increased, and the car's power has noticeably decreased. This indicates a faulty fuel filter. The manufacturer recommends replacing the fuel filter for Toyota Camry V50 , V40, V30 at least once every 80-90 thousand kilometers. But in practice this has to be done more often, since the quality of fuel in our country leaves much to be desired. The replacement procedure for Toyota Camry V30, V40, V50 is identical. Unlike older models, here the unit is located not under the hood, but in the bank itself. It can be accessed through a special hatch located in the car interior under the rear seat.

What is a filter for?

No one is immune from the use of low-quality fuel; it occurs everywhere. To eliminate the harmful effects on the engine of rust, metal chips and other impurities that may be found in the fuel, a fuel filter is installed. Its task is to retain small debris so that it does not get into the motor, as this will lead to breakdown and, as a result, to expensive repairs.

If a filter replacement is necessary before the deadline set by the manufacturer, drivers most often notice this. The car loses power, has difficulty starting, the engine is unstable, especially at low speeds, and may stall. This indicates that the filter has stopped performing its functions normally and needs to be replaced.

Examination

After replacing the fuel filter Toyota Camry 40 . 30 or 50, it is necessary to let the engine run a little. In this case, the engine may operate unstably, since air may have entered the system when replacing the filter. After a few minutes, the car is turned off and checked for gasoline leaks.

Replacing a Toyota Camry fuel filter will take no more than half an hour. This is a simple procedure that needs to be done regularly. If you do it yourself, you can save money and not contact a service station. Experts recommend replacing the fuel pump grid at the same time. This will extend the life of the new filter.

In accordance with the manufacturer's recommendations, the fuel filter is replaced after eight years of operation or after 80,000 km (whichever comes first).

However, taking into account the experience of operating cars in Russian conditions, we recommend replacing it every 30,000 km. Jerks when the car moves, first at high and then at low speeds, most likely indicate a clogged filter.

The fuel filter of the Toyola Carnry is structurally integrated with the fuel module housing.

The vehicle is equipped with a DENSO 17801-28030 filter element.

Fuel module: 1 - fuel level indicator sensor: 2 - valve ring: 3 - spring: 4 - fuel pressure regulator; 5 - sealing rings; 6 — fuel nozzle body; 7 — electric fuel pump; 8 — fuel module wiring harness; 9 — bracket; 10 — fuel pump holder

The fuel in the power system is under high pressure, so it is prohibited to loosen the connections of the fuel lines while the engine is running or immediately after stopping it. To carry out repair work on the power supply system on a freshly stopped engine, it is first necessary to reduce the pressure in the power supply system.

You will need an "8" wrench, a circlip remover, and a container for draining fuel.

1. Turn off the ignition and open the hood.

2. Disconnect the wire from the “-” terminal of the battery.

3. Having lifted the front part of the rear seat cushion, remove the two brackets for its fastening on the right and blind from the holes on the body and remove the rear seat cushion from the car interior.

4. Use a screwdriver to pry off the fuel module hatch cover.

5. Disconnect block B of the wiring harness from the fuel module by releasing the latch.

6. Connect the wire to the “-” terminal of the battery, start the engine and let it run until the fuel is completely exhausted from the fuel rail. After this the engine will stall

7. Turn off the ignition. Now you can disconnect the fuel lines.

8. Disconnect the wire from the “-” terminal of the battery.

9. Remove the locking bracket of coupling A of the fuel line (shown by the arrow) and pull the coupling out of the hole in the fuel module.

10. Unscrew the eight bolts B and remove the pressure ring, the fuel module and the gasket installed under it. Remove the module from the fuel tank opening carefully, turning it so as not to damage or displace the fuel level indicator sensor float. Drain the fuel from the module into a previously prepared container.

11. Remove the fuel level indicator sensor from the fuel module.

12. Using a circlip remover from the fuel pump holder guide pins, remove both pins from the holes in the holder.

Replacing the Toyota Camry fuel filter.

The procedures carried out when opening the tank are very dangerous and require careful attention and accuracy when performing certain work. The slightest spark, even a static spark from a frayed sweater, can ignite fuel vapors.

We raise the rear seat, under which there is a technological hatch. We open it - it is glued to a thick bitumen mixture. And here everything is in full view.

Disconnect the fuel pipe and wiring harness from the fuel pump housing. We blow out all the dust and dirt from the body and around it so that it does not get inside the gas tank. We unscrew all the bolts around the thrust ring and pull out the ring itself.

We take the fuel filter out of the tank onto the workbench for further disassembly and replacement with a new filter. As you can see in the photo, the fuel filter mesh is dark - it needs to be washed and blown out for subsequent installation. There is no need to change it; it is a coarse filter and traps large debris. Visually compare the new filter with the old one.

We disassemble the pump housing into its component parts. This is a bottom cover with a fuel level sensor, a pump with a mesh and a check valve for regulating gasoline pressure in the fuel rail.

We assemble everything onto a new fuel filter and install it in the gas tank. Close the lid, pressing it tightly so that gasoline vapors do not enter the cabin. After installation, the vehicle is test run. It is left running for a while so that the air that has entered the system comes out of it. In this case, the car may become damaged, since simply air will get into some chambers instead of fuel. But all this is a matter of a few minutes. After this, everything is checked for fuel leaks. The car is then ready for use. That's it for replacing the Toyota Camry fuel filter.

finished.

Replacement

The replacement process cannot be called complicated. Those who have practical repair experience will not have any difficulties. Before starting the procedure, you need to prepare the tools that may be needed:

• a set of keys;
• Phillips screwdriver;
• brush.

Next, you should proceed directly to replacing the Camry 40, 30, 50 fuel filter :

1. It is necessary to remove the rear seat sofa.
2. You will see a hatch. Open its cover, but you need to do this carefully, it is attached with a wire.

3. Disconnect the terminal by pressing the tab and pulling it towards you.
4. Take a brush and clean off any dust that may have accumulated under the lid.
5. Disconnect the hose; to do this, just pry up the brackets with a screwdriver and move the stopper to the side.
6. Using a screwdriver, unscrew the protective cover, which is attached to several screws, and remove it.

7. After this, the entire structure can be removed from the tank.
8. Disconnect the contacts and the two latches that secure the plastic bezel.

9. Disconnect the wires.
10. At the top of the structure there are several more latches that can be removed using a screwdriver.
11. Remove the filter itself from the housing.
12. Disassemble the housing (disconnect the bottom cover, fuel pump, pressure valve, fuel sensor).

13. Assemble all the parts for the new spare part and install it in place.
14. Start the car.

Main signs of a clogged filter

The fuel filter becomes unusable gradually, so it is quite difficult to judge its condition during the operation of the car. It may become clogged much faster than you drive 20 thousand kilometers. Here you need to pay attention to the signs of the car's behavior.

The most common signs of blockage are:

• Unstable engine operation, in particular, “sneezing” and instability at low speeds.
• Noticeable drop in power.
• Increased fuel consumption compared to normal levels.

If your car has one of the above problems, be sure to check the condition of the fuel filter.

One of the most popular questions among Toyota car owners is when to change the fuel filter on a Camry? First, you need to read the technical manual of your vehicle. It is there that clear information is given from the manufacturer regarding the frequency of replacement.

But in the realities of life, everything is quite the opposite. Drivers recommend replacing them every 20-30 thousand kilometers. If the car is rarely used, then it is recommended to replace the fuel filter in the Toyota Camry at least once every two years. Failure to comply with these recommendations will result in clogging of the engine power supply system and fuel injection nozzles.

How often should I change

The Toyota Camry manufacturer sets the frequency of replacing the fuel filter for models V30, 40, 50 - at least once every 80 thousand km. This indicator is not accurate; it largely depends on the quality of the fuel that the car owner uses. You need to focus on it if your car has traveled the specified number of kilometers and the fuel filter is working properly. If it is not replaced, as recommended by the manufacturer, then the breakdown will not take long to happen and may happen at the wrong time.

Practice shows that replacing the Camry v50, V40, V30 fuel filter is necessary more often - after 30 thousand km. Typically, at this mileage, signs of clogging will begin to appear. If this happens, you should contact a service station or replace the unit yourself, since the fuel filter has stopped working properly and may allow small debris to pass through, which threatens to damage the injection system and the engine as a whole.

Before changing the filter, you need to prepare the car and tools. After completing the procedure, be sure to check whether all parts are well secured and whether there is any undercutting from under the hose.

When to change and what oil to fill in Camry V50

The oil change interval indicated in the repair manual is 10,000 km. Based on severe operating conditions, replacement is allowed at 5,000 km. There will definitely be no harm from this, and benefits are very likely. The oil is changed along with the filter.

Severe conditions include heavily loaded vehicles, dusty areas, frequent trips over short distances, long periods of idling, etc.

For the 2AR-FE (2.5) engine, the oil filling volume is 4.4 liters of new lubricant (including the filter). For 2GR-FE (3.5) this volume will be 6.1 liters.

It is recommended to fill with original Toyota Genuine Motor Oil or analogues:

• Original synthetic motor oil Toyota 5W40 (5 l canister), number - 0888080375.
• Original synthetic motor oil Toyota 0W30 (5 l canister), number - 0888080365.

• Original oil filter Toyota Camry V50, number - 04152YZZA1. Analogs: MAHLE X414D1, AC DELCO PF2259, BOSCH BT12, FILTRON E6851, BLUE PRINT ADT32120 and others.

• Original Toyota Camry V50 drain plug gasket, number - 9043012031.

Which one is best?

When selecting a filter, you must consider:

• engine displacement;
• name and reputation of the company supplying spare parts.

Original fuel filter Toyota Camry V40

On XV40 cars, when using a 2.4-liter engine for fuel purification, the plant installed a cartridge 77024-33060 (price from 4.8 thousand rubles). The coarse fuel filter does not have an article number and is not supplied to the spare parts market (it is supposed to be replaced complete with an electric pump). Car owners are forced to use analogues or wash the old product with carburetor cleaner or other organic solvent.

To clean the fuel, the plant installed an original fuel filter.

When installing a 3.5-liter engine, a fine filter with article number 23300-21010 was used (differing in design and price reduced to 2 thousand rubles).

The original screen element 23217-0C010 is available on the aftermarket.

Original fuel filter Toyota Camry V50

The standard equipment on the Toyota Camry V50 uses a fine filter 77024-33090 (cost from 4.7 thousand rubles), which is supplied to the spare parts market. On cars with a 3.5-liter power unit, a cartridge 77024-33180 is used (price from 4.3 thousand rubles). It is impossible to purchase an original fine coarse mesh (regardless of engine size).

Analogs and fakes of the original

Since original Toyota components are expensive, many owners switch to components from third-party suppliers. When determining the part number, you must take into account the VIN number of the vehicle.

However, indicating the serial number of the machine does not protect against purchasing the wrong part (a similar situation may arise when selecting the original).

Analogues suitable for Camry V40:

• For cars with a 2.4 liter engine, they use FS6305 manufactured by JS Asakashi, which is the official supplier for Toyota factories. The price starts from 1.7 thousand rubles. It is allowed to use spare parts Masuma MFFT110 (1.3 thousand rubles) or SCT Germany ST 500 (1.5 thousand rubles). If you need to replace the mesh, it is recommended to purchase a part from the manufacturer Deco (article 23217-0H070) or Krauf (code KR1148F). The price of components does not exceed 600 rubles.
• In the case of using a 3.5-liter engine, it is possible to install an analogue of the JS Asakashi FS6300 (price about 700 rubles) or Masuma MFFT103 or Japan Parts FC-234S products (will cost the owner up to 500 rubles). Please note that the module has an original grid configuration without a guide cutout. The original is supplied as spare parts. In case of repairs, owners use products with article number 232170C010 from Toyota (price from 550 rubles) or KR1003F from Krauf (cost no more than 110 rubles).

For cars with a 2.4 liter engine, a JS Asakashi filter is used.

Analogues suitable for Camry V50:

• For cars with a 2.5-liter engine, you can use the JS Asakashi FS2105 or Masuma MFFT140 filter (price 3.2 and 1.4 thousand rubles, respectively). Analogs provide separation of small dirt particles at the level of original products and have a comparable service life.
• For the version with a 3.5 liter engine, JS Asakashi FS2105 or Masuma MFFT151 parts are suitable (price 2.7 and 1.6 thousand rubles, respectively).

Counterfeits of original components have the following features:

• burrs on plastic edges or an uneven end surface, flash at the mold joint line and non-uniform structure of the material;
• when using homogeneous plastic, the fake gives off a yellowish tint (the original is made of white material);
• absence of markings on the surface of the case (associated with the desire to reduce the cost of counterfeiting);
• reduced weight due to savings on filter paper (the original has a weight without a box of 0.232 g);
• reduced area of ​​the filter element (determined only after cutting the housing).

This is interesting: Replacing constant velocity joints in Toyota Corolla

Which filter to choose for Camry V50

There are two types of filters - regular and carbon. Many motorists believe that a carbon filter filters incoming air better and give preference to it. However, there are those who do not notice the difference, except in price.

Toyota cabin filter . Its cost is about 2 thousand rubles, which is not very cheap. However, in addition to the original, you can choose analogue filters from cheap Chinese ones to quite good filters from European manufacturers.

Analogs

• Agama AC1108C from 280 RUR coal
• Amiwa 2001037 from 170 RUR
• Avantech CF0107 from 260 RUR
• Corteco 2165 2551 from 500 rub.
• Denso DCF35-6P from 580 RUR
• Filtron K 1210 A from 220 RUR
• FRAM CFA10322 from 570 RUR
• Goodwill AG151CFC from 500 rub.
• Mann CUK1919 from 750 RUR
• Sakura CA1114 from 320 RUR
• Valeo 715 730 from 1100 rub.

These are not all analogues that are suitable as a replacement for the original filter. When purchasing a carbon filter, remember that it may not cost less or the same as a regular filter. Carbon filters are always more expensive.

Required parts and tools

To replace, you need to prepare a new gas filter and several tools:

• pliers;
• screwdriver;
• wrench for 8;
• rags;
• hair dryer;
• special solution for cleaning the mesh;
• brush.

Original petrol filter Camry XV40 2.4

The original gasoline filter for a Toyota Camry V40 with a 2.4-liter engine differs from the gasoline filter intended for a car with a 3.5-liter unit. Therefore, you should carefully select the spare part according to the catalog number. The article number of the original filter for the Camry V40 2.4 l is 7702433060. The price range is from 6,000 to 9,000 rubles.

The cost of auto parts for the more powerful version of the fortieth Camry is cheaper and starts from 2 thousand. When purchasing, you should use the Toyota fuel filter number for Camry V40 3.5 l 2330021010.

The original coarse filter (mesh) is sold only complete with a pump. But you don’t have to change it, but rinse it well.

Coarse filter

If you want to change the mesh, then, with some effort, this filter can be found separately on the ebay resource. Part number from DEKO 232170H070. Also in the catalog its second name may be indicated - PT-25.

Analogs and fakes of the original

When purchasing an original fuel filter, there is a chance of receiving a counterfeit spare part. It can be determined by:

• poor processing of plastic at edges and joints;
• the presence of yellowness in the shade of plastic;
• lack of marking;
• difference in weight - the original has 232 g;
• The arrangement of the folds of the filter element should be fan-shaped or accordion-shaped.

But do not confuse fakes with analogues. After all, such replacements for the original differ only in that they were not produced by Toyota divisions and partners. Otherwise, they meet all parameters and are produced by licensed enterprises. The most popular analogues suitable for installation on the Toyota Camry 2.4 l are:

• JS ASAKASHI filter with number FS6305, which motorists consider the direct “successor” of the original;
• auto parts from Japan with code MFF-T110 from Masuma, which has the ideal combination of low price and excellent quality;
• German filter number ST 500 from SCT, which has gained popularity due to its reliability.

For cars with a 3.5-liter unit, the most suitable analogues are:

• Japanese filter with article number MFF-T103 from Masuma, which is completely identical to the original;
• gasoline filter from Italy from Japan Parts, having catalog number FC-234S. However, there are doubts about this company that it is a manufacturer of spare parts, and not packaging containers.

A high-quality analogue will last no less than a Toyota gas filter, provided proper maintenance and adequate fuel quality.

How to extend the life of an oil filter?

When using lubricant mixtures, you should give preference to lubricating fluids with low viscosity. Such lubricants are quite economical and energy saving.

Toyota engineers recommend using the following class of lubricants for the Toyota Camry v50 car engine:

• lubricant class GF-4 (this class of oils is most common in the CIS countries and Europe);
• lubricant class GK-5 (a budget analogue of lubricants class GF-4, which is sold in the USA);
• lubricant class GFR-4.5 (common in Europe, this includes oils that are used in cars with increased engine loads).

Engineers advise using oils with a viscosity no higher than the following (according to the ILSAC classification table):

• 5W-30;
• 0W-20;
• 5W-40.

Step-by-step instruction

The procedure in question for the Toyota Camry V40 is not that complicated. The main thing is not to rush anywhere and do everything consistently. Before you begin, you need to do some preparation, consisting of several stages.

Preparation

1. First you need to drain the fuel and relieve pressure from the tank.
2. After this, you need to get the fuel pump relay.
3. Then all you have to do is start the engine and wait for it to stall.

Such preparation is needed to relieve pressure in the line. This is unlikely to help completely avoid gasoline leaking out when removing parts, but it will greatly simplify the work.

Instructions for replacing the filter

When the preparation is completed, you can proceed directly to replacing the fuel filter in your Toyota Camry V40.

1. To gain access to the necessary parts, the first thing you need to do is remove the rear seat.
2. Next, unscrew the screws securing the plug and remove it.
3. By removing the plug, you can see the fitting extending from the fuel pump. It needs to be unscrewed using wrenches.
4. Now you can safely disconnect the fuel line.
5. Next, using pliers, you need to move the clamp from the return hose and disconnect it.
6. We unscrew the screws that secure the pump bracket with a ratchet.
7. We remove the pump from the car along with the bracket.
8. Using two slotted screwdrivers, remove the lock washer and then the filter.
9. We install a new filter and put on the washer.
10. Repeating the sequence of actions in reverse order, we assemble the pump.

Installed and connected new fuel filter
Perhaps at first glance all this seems complicated. But if you know how to hold a screwdriver and a wrench in your hands, you will be able to cope with this task. And the second time everything will be much easier.

Precautionary measures

If you decide to carry out the procedure yourself, you need to study, for example, the video of replacing the Toyota Camry v40 fuel filter . Be sure to follow safety rules - when replacing, there may be a gasoline leak, an accumulation of fumes, which poses a risk of fire.

Before replacing you must:

1. Drive the car out of the garage into the open air to prevent the accumulation of gasoline vapors.
2. Remove sources of open flame, including turning off the power to the car by disconnecting the battery.
3. Relieve pressure in the fuel system (just open the tank cap).
4. Keep fire extinguishing agents on hand.

Next, we proceed to replacing the Toyota Camry 30 fuel filter . It is worth paying attention that it is recommended to buy high-quality spare parts recommended by the manufacturer, since only they guarantee reliable, long-term operation.