Windshield wiper blades for Toyota Land Cruiser Prado 150 [J15] 08.09→

1. Selection of wipers by car

›

2. Toyota

›

3. Land Cruiser Prado

›

4. 150 [J15] 08.09→

The wipers of the Toyota Land Cruiser Prado 150 [J15] have a 9x3 hook type mount and sizes 650 and 500 mm.
The car has a synchronous windshield wiper system. This vehicle is equipped from the factory with hybrid windshield wipers. Among the presented blades we can highlight Denso Hybrid DUR-065L + Denso Hybrid DUR-050L, which are 100% analogues of the original windshield wipers. For use in winter, we recommend Hella Winter W65 + Hella Winter W50. Among our customers, the Denso DM-565 + Denso DM-050 wipers have the highest rating for the Toyota Land Cruiser Prado 150 [J15]. Be careful when choosing a rear brush, as the catalog contains options for different car modifications with different mounts/types of brush! For Toyota Land Cruiser Prado 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2021, 2021, 2021, 2019, 2021, 2021 model years. Mounting type: 9×3 hook

Wiper dimensions: 650 mm 450 – 500 mm

How to change wipers

Other modifications Land Cruiser Prado 120 [J12] 09.2002-12.2009 Land Cruiser Prado 90 [J9] 04.1996-12.2002

Quick link: Front windshield wipers For right-hand drive vehicles Rear wipers

Repair and replacement of rear wiper Prado 150

The presence of high-quality wipers in a car gives the driver confidence when traveling in rain and snow.
In case of any malfunctions or malfunctions, the windshield wipers must be urgently repaired or replaced. If the blades are broken, the rear window and windshield are not cleared of dirt and water stains, which reduces visibility when driving and increases the risk of an accident. The rear wiper on the Prado is a framed metal structure in the form of a lever to which a rubber blade is attached. The brush is fixed using a special fastener with a plug. The brush itself is equipped with rocker arms - movable parts that fix the rubber blade on the glass surface.

Due to constant exposure to an aggressive environment, the windshield wiper wears out over time and ceases to effectively perform its cleaning function.

Replacing the rear wiper on a Prado 150 may be necessary if there is a malfunction of the electric motor, shift lever, or wear of the rubber bands.

Replacing windshield wiper rubber bands on Toyota Prado 150

Due to frequent use, the rubber bands of a windshield wiper wear out quite quickly. You can replace the scraper yourself. The procedure consists of several steps.

To remove the brush:

1. Turn the ignition switch to ON mode and turn on the rear wiper switch. The windshield wiper motor will not operate while the window or tailgate is open.
2. When the wiper moves to a vertical position (27-390) that is convenient for removal, turn off the ignition.
3. Raise the wiper arm, making sure it is not in the way of the door spoiler.
4. Gently lift the brush until it clicks to release the grip.

To remove the Prado 150 rear wiper blade from the lever (see video), pull it to the left.

To remove the rubber scraper, lift and pull it out by the protruding end. To avoid breaking the gripper and support plates, do not pull too hard on the wiper. Remove the support plates from the brush.

To insert a new rubber band:

1. Install the support plates. It is important to ensure their correct position when installing.
2. From the front end of the brush, thread the rubber band towards the other end using the second gripper.
3. Push the scraper through the grip so that the end of the rubber protrudes beyond the plug.

As a final step, move the scraper to the front end of the gripper.

To install the brush in place, place it back on the lever by pushing it towards the right side of the car body. Then the gripper is engaged.

When replacing the rear wiper on the TLK Prado 150 (see video), be careful and do not use excessive force so as not to break the grip.

How to Change the Rear Wiper on a Prado 150

Replacement windshield wiper for Toyota Prado 150

Windshield wiper blade Land Cruiser Prado 150 ORIGINAL: = Toyota 85214-68020. Driving Lexus 85214-60120. Passenger Toyota 85214-53090. Passenger (100 rubles cheaper) = Toyota Wiper ORIGINAL: = 85222-60260. Directions 85212-60210. Passenger = Denso windshield wipers: = DUR-065L. Directions DUR-050L. passenger car

Comments

olegk24russ:

and
the rear windshield wiper ?
Nicholas Scorpio:

Gratitude! How to order? Is this not the way to remove the rear wiper?

Vladimir R.:

Where did these prices come from? Just today I accepted an order from Ozone, 650mm left. 1130, right 500 mm. 699. Taking into account the discount and payment, thanks to Sber they cost 550 rubles for both brushes.

Toyota Toyota:

Scammer! Buy Denso brushes every two years and you will be lucky!

Paul Husslust:

Man, thank you! Well, it's nice to watch and listen to. how to remove and modify a VAZ. An educated person without me and water.

Yuri Kononyuk:

What is the length of the eraser on your Toyota Prado? I need 650 (mm) on RAV4

Nikita Efremov:

damn, I ordered everything from wine, but they were 10 cm shorter

Kenan Medet:

Thanks for the advice.

Egor Miroshkin:

and every year I drive a new Michelin when visiting our city, it's not that expensive at 10 apiece

Vladimir Korotkov:

Thank you very much for the video. Tell me where to order an eraser for the Prado?

Yaroslav:

Thanks for the video on how! Or maybe you still have the part number for the rear wiper eraser that is similar in size to the front?

John:

Thanks again! Today I changed the gum according to your recipe))) The effect is impressive. Before this, I went to the factory installation for 3 years and last year I swore with every rain. But because of your video, I lacked motivation and it took me exactly 3 minutes to replace the erasers.

John:

Thanks to the author. Maximum effect at minimal financial costs.

Press CTRLD to bookmark the page. Press CTRLD to bookmark the page.

Video on this topic

Toyota Prado 120 windshield wiper repair

Replacement windshield wiper blades (wiper blades) for Toyota Carina

Easy, aside, we change the windshield wipers on a Toyota Carina.

Replacing Denso Wiper Blade Hybrid Wiper Blade

I bought it here: https://ali.pub/1aecjf. For Solaris and Kia Rio, select the product marked 2 comments and indicate in your order.

Toyota Rav4 windshield wiper blade replacement

I hope my video is helpful.

100% economical brush replacement

In this video I want to tell you how to easily save and paste the original. Over the 5 years of operation, the rear windshield wiper was signed to it as a regular wiper. Original number Right eraser.

as a replacement windshield wiper blade for a Toyota car

Replacing erasers on Toyota Corolla

Replacing tires on Toyota Corolla windshield wipers.

Replacing windshield wipers with rubber bands for Toyota Corolla

150

I ordered here https://got.by/1j3z51 Erasers for brushes 2 pcs. https://got.by/1j4048 Brushes for Toyota Corolla 2614 https://got.by/1j3zoa

Replacement windshield wiper for Toyota Prado 150

Windshield wiper blade Land Cruiser Prado 150 ORIGINAL: = Toyota 85214-68020.

Last news

How to wear denim to work |

Replacement windshield wiper for Toyota Prado 150

Land Cruiser wiper blade Approx. 150

ORIGINAL:.

Toyota Prado 120 windshield wiper repair

I hope my video is helpful.

Although office dress codes are becoming increasingly informal, it's still nice to feel smart and dressed appropriately when you get to work. That's why wearing denim for your nine to five can be challenging. So how do you do it? Trilogy Stores, sellers of women's straight-fit denim, give us some insight: Styling Denim If you're new to denim or your office isn't too relaxed, you can play with black denim. Black high-waisted jeans can have a slimmer look than black work pants. I didn't find a topic about the rear bumper. how to remove it looks like a ghetto on the front bumper. Replacing a pin on a Prado cruiser Replacing rear shock absorbers. A high-waisted denim piece can stretch your legs. perfect to pair with your favorite pair of heels. Buy black jeans with a playful hem and add a stylish touch to your outfit. The pulpit is in season now, and there's no reason why you can't bring the trend to the table. Black or indigo jeans paired with an elegant blouse, an oversized jacket and flat ballet shoes. This is one outfit that looks summery but work-appropriate. Wear your blouse to take off your clothes and put on your heels when you go out for drinks after the office. Likewise, leg trim jeans are suitable for the warmer months and pair well with a loafer and slip blouse combo. How to remove Toyota Prado 150 Rear wiper. If you feel like you're adding a pop of color to your look but don't want it to be too loud, opt for a pastel palette. Lilac or sky blue denim can be a good complement to an elegant shirt. perfect for being bright and cool when the sun is shining. Classic blue leather jeans aren't something you should look for every day either. With a white sleeveless shirt and a plaid blazer, you can create a fashionable outfit that isn't boring. How to remove a headlight on a Renault Fluence. Move the pumps from point to foot and begin the movement. Don't forget about white jeans. Often referred to as "holiday jeans", they can be folded to be suitable for work. Dressed in a dark or pastel shirt, white denim can be appropriate for work. choose a pair with a thin leg for a stylish summer look.

Styling a skirt Pencil skirts and a shirt. a classic style worn by women in the office. This is one way to feel feminine without revealing too much, and you can look uber stylish as part of a strong suit. How to replace valve seals on a VAZ-2106 with your own hands. instructions. Why not trade in your black denim skirt for a denim skirt? Denim skirts with a dark wash look chic and trendy this season. Avoid distressed denim and lightweight underwear, as they can look more like beachwear than workwear, and avoid anything that sits above the knee. How to remove windshield wiper for replacement on Toyota Prado 150. Instead, pencil skirt in dark blue black or black jeans with jacket lining. outfit. Paired with a blazer on, you can wear a tracksuit or a float blazer for a less formal look. Chevrolet Headlight Replacement Lights Help drivers on the road and provide design assistance. So I've been traveling for three years in a 95 Prado and I'm just trying to replace the A as a rear end. For added embellishment, choose one of the thinnest center pins and leave the bottom pin open to create a split leg. Alternatively, an A-line denim skirt can look savvy when paired with a long sleeve neck and crew boots. Don't be afraid to experiment with different colors. Similar to denim jeans, skirts are in pastel colors. This is a fun way to do it for the warmer months. wear a chiffon blouse and wear heeled sandals or pointed boots. Or, if you're feeling bolder, choose a bright red or green denim skirt and wear a classic black V-neck to tone it down. Coordinate your outfit by adding a color crossing or tote bag. As we can see, there are many ways to style denim for the office. Make sure your office has this dress code before you start wearing jeans to work, and if it does, don't hold back! From stylish indigo skirts to studded pencil skirts, bringing denim to the office will help you stay fashionable and dressed up. Don't forget to also make accessories and body bags correctly. A good way to introduce a little color to your outfit and a specially selected jacket is the perfect product to style your wardrobe.

Comments

olegk24russ:

the
rear wiper ?
Nikolay Skorpion:

Thank you! How to order? How to remove the rear wiper?

Vladimir R.:

Where did you get these prices? Just today I picked up an order from Ozone, left 650 mm. 1130, right 500 mm. 699. Taking into account the discount and payment thanks from Sber, it cost 550 rubles for both brushes.

toyota:

Poverty! Buy Denso Brushes every two years and you will be happy!

Paul Gulisty:

Man, thanks! Well, it's nice to watch and listen. how to remove and replace it on a VAZ. An educated person without BE ME and water.

yury kononyuk:

Tell me, how long are the rubber bands on your Toyota Prado? I need 650 (mm) on RAV4

Nikita Efremov:

Damn, I ordered everything according to wine, but they turned out to be 10 cm shorter

kenan medet:

Thank you very much for the advice.

Egor Miroshkin:

and every year I exchange for new Michelins, look in your city, we are not so expensive at 10 apiece

Rear wiper repair

It happens that when the windshield wiper operates on a Toyota, oxide occurs in the motor. You can fix it yourself by cleaning the mechanism with WD-40. To do this, pull back the rubber band and spray the soured shaft with an aerosol. Turn on the wiper and let it run, helping with your hands if necessary. After processing, lubricate the parts with silicone grease.

If the procedure does not help, then the motor requires deeper cleaning. In this case, disassembly of the mechanism will be required. Remove the tailgate trim and use a clamp to unscrew the windshield wiper washer. Remove the leash and motor cover. Pull the rod with the gear welded to it out of the electric motor bushing. Thoroughly clean, sand and oil all elements. Reassemble the mechanism in reverse order.

Also, the Land Cruiser wiper may stop turning on for the following reasons:

• controller malfunction (located behind the car radio);
• damage to the relay (located under the tailgate trim);
• broken steering switch;
• wiring fault.

To find the exact cause of the breakdown, you will need to remove the tailgate trim and find the relay. The rear windshield wiper is controlled via minus. If this indicator is constant, it means the controller is faulty. If the control unit is operating normally, a procedure for testing the wiring and diagnosing the switch will be required.

It is better to entrust this procedure to auto electricians.

I want to put a frameless blade on the rear wiper instead of a summer one. The front ones have had these brushes for a long time. I twisted and turned, but couldn’t figure out how to remove the old brush. On the front wipers, the blade can be easily removed. where should I press or press here? I'm afraid to use force, the plastic is easy to break. If possible, with pictures or a link to a description with pictures. (Allion 240, 2006)

Last edited by JustDoIt_One; 13.11.2011 at 16:41.

yes, it seems like it should be the same as on the front ones

Not at all, you need to turn the brush 90 degrees. the lock will work. thanks people for telling me

Oooh, no wisdom

How can I turn it 90 degrees? After all, the wiper itself (on which the blade is held) does not rise to allow this to happen.

I filmed body 241 at Kaldino, now I’ll go take a photo of how it’s removed and post the photo. I also wanted to install a frameless one, I’ll tell you straight away that it won’t fit, the only thing that can be done is to replace the elastic band itself with a new one.

Last edited by Sergey04; 11/18/2011 at 09:17.

Removing the rear wiper is even easier than the front ones. We pull the wiper blade 90 degrees, it will pop out of the lock, and then it can be removed almost without effort. In principle, everything is visible in the photo. Just in case, I took a photo of the wiper mounts themselves, in case they come in handy.

Miniatures

A real THANK YOU, fellow countryman. Over the winter, my wife destroys these rubber bands into trash. I’ve been thinking for a long time about how to install another brush, but for some reason I was afraid of breaking it when I tried to turn it out like that.

You can also replace the brush.

There is a problem with replacing the rubber - I tried using different manufacturers, the profile is slightly different from the original one and the rubber does not move well in the rocker arms. On convex glass this means uncleaned areas, especially in winter and when heavily soiled.

TLC Prado 150 TX-L

It’s stupid to look for a black cat in a dark room, especially if it’s not there. But it’s even stupider to look for a black snake in a dark room. Especially if she is there.

Handsome! Respect and respect! otherwise I was turning the spit and wanted to remove it, I pressed it and turned it on the funcargo, I thought I would break it, but then there was a click and voila)))

Symptoms that indicate the timing belt needs to be replaced

The rubber blade of the gas distribution mechanism ensures synchronized operation of the camshaft, crankshaft, valves and pistons. The car part is not subject to corrosion, but over time it wears out and can cause a complex breakdown.

The reliability of the timing belt in Toyota Prado 120 is determined as follows:

1. Visually check the degree of sagging. To do this, remove the protective casing, rotate the crankshaft and inspect the blade along its entire length.
2. Check for defects. Tears, cracks, peeling and depressions are sure to become a big problem when the engine is under heavy load.
3. Traces of oil or antifreeze on the surface reduce the functionality of the gas distribution mechanism.
4. Compare the mileage of the car and the service life of the part according to the technical passport.

The owner of a Toyota Prado can also determine damage to the timing mechanism for such indirect reasons as:

• the engine stalls for no reason;
• exhaust gas turned black;
• extraneous sounds are heard and uncharacteristic vibration is felt from under the hood;
• the car starts with difficulty, jerking and loss of power;

The normal operation of the gas distribution mechanism can be hampered by excessive constriction of the canvas.

New reviews about car services (rear window replacement for Toyota land cruiser prado iv (j150)) in Moscow

Excellent service - the specialists are all Russian, the prices are very reasonable, I am satisfied.

It was November 8, 2021, a diagnostic of the spar was required, they checked it quickly, found a little rust, sanded it down, treated it with a converter, coated it with anti-corrosive and painted it on top in body color, the quality was excellent, the price was great.

A disregard for clients, in general, this is more a problem of the administration than of the craftsmen. In general, be prepared for rudeness

They don’t know how to serve what is stated here

Video on this topic

Toyota Prado 120 rear windshield wiper repair

Replacing wipers (wiper blades) on Toyota Carina

We easily change windshield wiper blades on a Toyota Carina on the side of the road.

Replacing wiper rubber bands Denso Wiper Blade hybrid

I bought it here: https://ali.pub/1aecjf For Solaris and Kia Rio, select the remark 2 size item and indicate it in the order.

Toyota Rav4 rear wiper blade replacement

I hope my video will be useful.

100% savings replacement of camry wiper rubber bands

In this video I want to tell you how easy it is to save money and install the original. For 5 years of operation, the rear wiper Subscribe to it is like a regular wiper. Original number Right elastic band.

How to change windshield wiper blades on a Toyota car

Replacing rubber bands on the windshield wiper blades of Toyota Corolla

Replacing rubber bands on windshield wiper blades of Toyota Corolla.

Replacing wiper rubber bands for Toyota Corolla

150

I ordered here https://got.by/1j3z51 Rubber bands for brushes 2 pcs. https://got.by/1j4048 Brushes for Toyota Corolla 2614 https://got.by/1j3zoa

Replacing windshield wiper rubber bands on Toyota Prado 150

Windshield wiper band Land Cruiser Prado 150 ORIGINAL: = Toyota 85214-68020.

Toyota Prado 120 rear windshield wiper repair

I hope my video will be useful.

Although office dress codes are becoming more informal, it's still nice to feel smart and dress appropriately when heading to work. This is why wearing denim for your nine-to-five can be tricky. So, how should it be done? Trilogy Stores, premium denim retailers of straight cut jeans for women, provide us with some insight: Styling the jeans If you're new to wearing denim for work, or your office isn't super relaxed, you can play it safe with black denim . Worn with a patterned shirt tucked in, black high-waisted jeans can create a more fitted look than black work pants. I couldn't find a topic about the rear bumper. how to remove it, what does the getz look like on the front bumper. Change the stud on a Cruiser Prado How to change the rear shock absorbers. The high-waist element of the jean can elongate your legs — perfect when matched with your favorite pair of heeled courts. Buy a pair of black jeans with a playful hem to add an edge to your outfit that's still smart. Culottes are very in this season, and there's no reason why you can't bring the trend to the desk. Black or indigo jean culottes paired with a smart blouse, oversized jacket, and peep-toe flats is one outfit that would look summery yet work-appropriate. Tuck your blouse in to neaten up your outfit and add heels when heading out for after-office drinks. Similarly, cropped leg jeans are suitable for the warmer months and pair well with loafers and a cami-blouse combination. How to remove the rear wiper of a Toyota Prado 150. Yes and. If you feel like adding a pop of color to your look, but don't want to go too loud, opt for a pastel palette. Lilac or sky-blue denim can complement a smart shirt well — ideal for keeping it bright and cool when the sun is shining too. Classic blue skinny jeans don't have to look casual either. With a sleeveless white shirt tucked in and a checked blazer, you can create a fashionable ensemble that's anything but boring. How to remove the rear light on a Renault Fluence. Slip on your point-toe pumps and begin your commute. Don't forget about white jeans either — often thought of as 'holiday jeans', they can be styled so that they're suitable for work. Worn with a dark or pastel shirt, white denim can be work-appropriate — choose a pair with a slim-leg to create a smart, summer look.

How to Remove the Rear Wiper Blade

Rear wiper blade - how does it function?

• Rear wiper blade - how does it function?
• 1. We study the causes of wear on the rear wiper blade
• 2. Design features of automobile windshield wipers and their blades
• 3. Let's get acquainted with the general rules that you need to know when starting to replace the windshield wiper blade
• 4. Removing the rear windshield wiper blade: how to avoid getting hurt or scratching the glass?
• 5. Installing the rear wiper blade: doing everything right

A car is an expensive pleasure. And this is not at all connected with its market value, but with the need to periodically replace all consumables and parts. This even applies to windshield wipers, or wipers, as we used to call them. After all, the constant interaction of windshield wiper blades with dust, dirt and water leads to their wear. And in a worn-out state, they are as useless as milk from a goat. Well, driving a car with dirty windows is the same as driving with your eyes closed.

Installing the alternator belt

With a worn part, the car battery will not receive sufficient energy for reliable operation of the engine. Untimely replacement leads to damage to the AKM.

To install the alternator belt in a Toyota Prado 120, you may need the following parts:

• tensioner;
• belt transmission element;
• support roller;
• generator pulley;
• pulley plug;
• adjustable wrench.

The new transmission element should be tensioned in the following order:

1. The furthest video.
2. Tensioner.
3. Bottom rollers.
4. Generator.

Tighten the tensioner bolt to complete the installation. Check the degree of deflection by turning the engine 2 turns.

Upon completion of the procedure, it is necessary to let the engine idle for 5-10 minutes. When the mechanism has cooled, adjust the position of the poly V-belt in accordance with the specified parameters.

A quick solution to your KDSS unit repair problem

In our service center you can purchase a refurbished KDSS unit with a 12-month warranty in exchange for your faulty one. Replacing a unit in our service center takes 2.5-3 hours by appointment.

Original valve block for the KDSS hydraulic stabilization system for Toyota Land Cruiser Prado 150.

12 month warranty

Price: 25,000 rub.

Original valve block for the KDSS Toyota 4Runner hydraulic stabilization system.

12 month warranty

Price: 25,000 rub.

Original valve block for the hydraulic stabilization system KDSS Lexus GX460.

12 month warranty

Price: 25,000 rub.

What are silent blocks and why are they needed?

Silent blocks are two bushings of different diameters, made of metal, and rubber (or polyurethane) located between them, which helps reduce vibration between the nodes. A rubber-metal hinge (this is the second name for a silent block) is needed to take on the main load exerted on the car’s suspension. Hinges are installed at the attachment points of the entire structure of the lower and upper arms of the car.

If you go to the exact mounting locations, the blocks are located, in addition to mounting the lower and upper control arms, on the shock absorbers above and below, anti-roll bars and thrust support points.

How to fix

There are several ways to resuscitate rear air conditioning pipes.

• The first is to replace them with new ones . Indeed, for some cars the price is absolutely ridiculous and allows you to change them at least every year. For example, the rear tubes on the second generation Hyundai Starex H1 (their numbers are 977704H400 and 97770-4H000) cost about five thousand (hereinafter prices are at the beginning of 2020). Replacing them is easy and can be done within one hour. But the price of the neighboring ones, which stand above the gearbox (97759-4H510, 97759-4H500, 97759-4H300) is close to 25,000 and they are supplied only to order. Another example is the rear air conditioner circuit of the Nissan Pathfinder R51. A set of new pipes (92460-EA000 and 92470-ZS01A) will cost 45 thousand, plus their replacement will cost the same. And all because it is impossible to do without removing the body from the frame. Therefore, it is worth thinking about other options.

Leaky tubes in the rear circuit

• We are trying to repair it . Repair of rotten aluminum tubes involves either argon arc welding or soldering. I don't know of any responsible welder who is willing to do this on a car. Working with aluminum requires its absolute cleanliness and good access. It is very difficult to do this without removing the line from the car. That is, we return to point one. Here is a list of cars on which it is impossible to remove the tubes without removing the body from the frame:

Soldering tubes

1. Nissan Pathfinder 2006-2016 Tube No. 92460-EA000 and 92470-ZS01A
2. Infiniti QX56 2004-2010 Tube No. 92460-ZW00A
3. Nissan Armada Tube No. 92460-ZW00A

• If the design of the car allows you to remove the lines without dismantling the body , then you need to prepare for possible corrosion of the intermediate connections. When unscrewing, fasteners break, threads on aluminum fittings are licked off, etc. Thus, when removing one part for repair, you can unexpectedly damage the adjacent one and incur unexpected costs.

Below is a list of cars and spare part numbers that most often rot and break during disassembly.

1. Toyota Land Cruiser Prado 120 (Lexus GX470) 88716-6B620, 88716-6B460, 88717-6A690, 88717-6A750, 88717-6A690, 88712-6A240, 88712-6A260, 88716-6B 420
2. Toyota Land Cruiser Prado (Lexus GX460) 150 88716-6C580, 88716-6C570, 88716-6C560, 88717-6B260, 88717-6B250, 88717-6B240, 88716-6C550, 88712-6A 500
3. Toyota Land Cruiser 100 (Lexus LX470) 88717-6A270, 88717-6A200, 88717-6A210, 88717-6A230, 88717-6A220, 88726-60650, 88726-60640, 88726-6063 0
4. Toyota Land Cruiser 200 (Lexus LX450/LX570/LX450D) 88716-6C660, 88716-6C660, 88716-6C240, 88716-6C240, 88716-6C240, 88716-6C220, 88716-6C22 0, 88716-6C660, 88716-6C240, 88716- 6C240, 88716-6C220, 88717-6B110, 88840-60140
5. Mitsubishi Pajero 4 7815A276, 7815B827, 7815A277
6. Mitsubishi Pajero 3 MR 360713, MR 360725, MR 360725
7. Ford Explorer 3 FB5Z-19867-A, DB5Z-19867-B, DB5Z-19835-B, FB5Z-19835-A
8. Nissan Patrol Y62 92460-1LA1A, 92460-1ZR0A, 92460-1ZR0B, 92460-5ZM0A, 92460-5ZP0A

• Well, the last, most practical option is to replace the tubes with hoses . This has been discussed and talked about a million times on the Internet. In short, the rear circuit tubes are cut out without any prelude. Special ends (trees) are welded (soldered) to the remaining ends at the front and back and the hose is crimped onto them with a hydraulic crimper. Sometimes, old pipes are left in order to attach hoses to them. Flexible hoses can be installed in tight spaces and last almost forever. Many people ask the question: Why don’t they do this right at the factory? Firstly, hoses are more expensive, and secondly, they are heavier.

Prepared back circuit tubes

Making a rear air conditioner hose
I would like to draw your attention to the material and manufacturers. This is not the first year we have seen extremely unsuccessful attempts to save money when repairing the rear air conditioner. You can understand what kind of tricks car owners go to, and they are humanely.

The most common mistake that we see is the use of hoses that are designed for hydraulics (RVD). Yes, the pressure for which they are designed is significantly higher than air conditioning - 120 Bar versus 30 Bar, but the material for their manufacture is MBR rubber, which is not resistant to organic and synthetic solvents. The closest relatives of freon R134 (which is what is used in cars) are such “hardened” liquids as acetone, dichloromethane, dichloroethane and others. Not only do the hoses begin to look like “corn” after just two or three months from local leaks, but the system also becomes catastrophically clogged with dissolved rubber, and this is a guaranteed breakdown of the compressor. The same can be said about the samples that have recently been imported in huge quantities from the Middle Kingdom - their inner layer is also made of rubber.

Unfortunately, today there is only one proven option - Good Year air conditioning lines. The outer layer is also made of MBR, but the inner layer is made of tebrane plastic, which is not dissolved by freon. Why "Unfortunately? Because the price of these materials is “biting”. In justification, I will say that we constantly monitor the market and, as soon as substitutes of decent quality appear, we will immediately begin to use them.

Goodyear Galaxy Air Conditioning Hoses

How to check silent blocks

You can inspect rubber-metal hinges yourself. To do this, you need an idea of ​​what an undamaged, new silent block looks like. Before carrying out the inspection, it is necessary to wash the car so that adhering dirt does not interfere with the view. The self-diagnosis method is suitable for experienced drivers who understand cars.

For inspection you will need an inspection pit, tools, knowledge of the structure of the vehicle, as well as practical skills. The rubber part of the hinge should be free of cracks, abrasions and damage - these are sure signs of wear on the part.

External signs of silent block wear:

1. Sound when making sharp turns or driving over potholes.
2. The car deviates when trying to drive straight.
3. Upon inspection, damage and cracks were found in the rubber-metal hinges.
4. The car becomes unruly when driving - the car does not immediately respond to turns of the steering wheel.

The presence of such signs is an ambiguous indication of a joint malfunction.

Broken tie rod pins have similar “symptoms”. Problems are also possible in other parts of the car. Only a specialist can carry out competent diagnostics using special equipment.