Which lamps to choose for the dimensions and brake lights of the Toyota Camry XV50

Payment for goods and downloading of the book in electronic form (PDF format) is made on the website.

To do this, you need to find the book you are interested in and click on the “Buy” button. The price of the book is indicated on the button.

For convenience, the price on the website for residents of Russia, Belarus and Kazakhstan is presented in rubles.

For residents of Ukraine in hryvnias, and for all other countries - dollars.

After clicking on the “BUY” button, a payment window will open where you can select a payment system with which you can pay for the selected book using any bank card (Visa, MasterCard, MIR, etc.)

When you click on the “Pay by bank card” button, the Portmone payment system will open, which is the easiest way to make a payment.

In addition, the website offers four payment systems for payment:

• Yandex (payment from any bank cards, Yandex Money account, QIWI Wallet, terminals, etc.);
• Portmone (payment from any bank cards, Portmone account);
• PayPal (payment from any bank cards, PayPal account);
• WebMoney (payment from any bank cards, payment from WebMoney wallets).

Payment via Yandex Cashier

After selecting payment via Yandex, the Yandex Cashier payment system will launch, where you need to select a convenient payment method (bank card, QIWI, Yandex Money account, etc.)

After specifying payment details and confirming payment, payment for the goods will occur.

If you have a bank card in a currency other than the ruble, then the money will be debited from the card at the rate of the Central Bank of Russia at the time of the purchase.

This payment method is optimal for residents of Russia, Kazakhstan and Belarus.

Official website of the Yandex Kassa payment system https://kassa.yandex.ru

Replacing lenses on Camry 2011

To replace a faded lens on a Camry 40, you need to disassemble the headlight. You can open the optics by heating the junction of the body and the lens in a circle with a hair dryer; be careful not to melt any element. The second method is to unscrew all the screws, remove the anthers and plugs, metal parts from the headlight, and place it wrapped in a towel in an oven preheated to 100 degrees.

After warming up the optics, begin to carefully remove the housing from the lens using a flat-head screwdriver. Take your time and gradually open the headlight. If necessary, warm up the optics again.

The sealant will form fibers that should not get into the inside of the optics. After opening the headlight, while it is hot, glue all the threads of sealant onto the headlight housing or lens.

The lens is attached to the body with three clamps, open one of them and carefully squeeze out the lens. Buy lenses with transition frames, which will greatly simplify your work. We replace the lens with a new one and wipe it with a 70% alcohol solution. You can remove dust and debris from the internal parts of the headlight with a dry, lint-free cloth.

Acetone should not be used! May damage surfaces of parts.

You cannot change the lower edge (cut line) of the shield slot; you will blind oncoming people.

The lens is in place, preheat the oven and place the headlight, wrapped in a towel, in there for 10 minutes. We remove and press the glass against the body, do not overdo it, the glass may crack, it is better to repeat the procedure 3 times. The glass is in place, screw in the screws and continue in the oven for 5 minutes.

Payment via Portmone

After selecting payment through Portmone, the payment system will launch, where you need to select the payment method: bank card or Portmone account.

The price in the Portmone payment system is converted into dollars at the exchange rate of the Central Bank of the country where you are located.

If you have a bank card in a currency other than the dollar, then the money will be debited from the card at the rate of the Central Bank of your country at the time of the purchase.

After specifying payment details and confirming payment, payment for the goods will occur.

Official website of the Portmone payment system https://www.portmone.com

Low beam bulb for Toyota Camry

One of the main criteria for vehicle safety is the lighting system. According to statistics, most accidents occur in the dark, often caused by malfunctions in the vehicle lighting system. Exterior lighting Camry V30, like other modifications of this model, consists of several elements: a light source (lamp) and a headlight design.

At the same time, the headlight on a Camry is manufactured in accordance with the regulations, while at the same time the light bulb is selected by the owner of the car independently. At the moment, halogen products have become very popular among light sources. The products have become popular due to their low cost, decent service life and increased power. They are almost always available in auto stores.

Improvements in technology in the field of automotive lighting have led to the creation of electrical appliances based on xenon. The operating principle of these light bulbs is based on the glow of an inert gas when an electric current flows. Their main advantage is their long service life and increased light output. The downside is the need to install an ignition unit.

Close-in light using LED electrical appliances is resistant to vibration, voltage surges, has a soft glow and a number of other advantages. There is a drawback associated with the formation of a directional beam, despite this, the products are excellent for daytime lights.

Payment via PayPal

After selecting payment via PayPal, the PayPal payment system will launch, where you need to select the payment method: bank card or PayPal account.

If you already have a PayPal account, then you need to log into it and make a payment.

If you do not have a PayPal account and you want to pay using a bank card via PayPal, you need to click on the “Create an Account” button - shown with an arrow in the picture.

PayPal will then prompt you to select your country and provide your credit card information.

After specifying the information required to make the payment, you must click on the “Pay Now” button.

Official website of the PayPal payment system https://www.paypal.com

List of light bulbs installed on Camry 40

Conventionally, light bulbs can be divided into those that are located in the cabin and outside it. The first provide illumination for the driver and passengers. Some of the interior lamps serve to signal various driver actions. There are separate dashboard lamps that serve to inform the driver about the condition of the car. Light bulbs outside the cabin provide illumination of the road at night, and also inform other road users about the driver’s actions.

Location and type of light bulbs

The purpose and type of lamps used, shown in the figure above, are shown in the table below.

Table - List of main lamps

Location of lamps in the interior
The list of lamps used in the interior of the Toyota Camry 40 is given in the table below.

Payment via WebMoney

After selecting payment via WebMoney, the payment system will launch, where you need to select the payment method: bank card or WebMoney wallet.

If you already have a WebMoney wallet, then you need to log into it and make a payment.

If you do not have a WebMoney wallet and you want to pay in another way, you need to select any of the methods that WebMoney offers and make the payment

After specifying payment details and confirming payment, payment for the goods will occur.

Official website of the WebMoney payment system https://www.webmoney.ru/

Types of lamps for Camry V50, V40, and V30

To select suitable Toyota Camry low beam bulbs, you need to know the model modification and year of manufacture. Depending on the Camry version V50, V40, V30, either xenon or halogen elements are installed.

The Camry V30, which was produced from 2003 to 2006, was equipped with a halogen lamp with an H7 socket. From 2006 to 2011 it was replaced by the V40 model. On it you can find not only halogen, but also xenon. Base parameters for Camry V40 are H11/D4S for halogen and xenon, respectively. The Camry V50 has been produced since 2012 and had the same base parameters - H11/D4S.

Some later Camry models use LED headlights for low beams. To form a beam of light, they are supplemented with lenses.

Downloading a book

After successfully completing the payment (by any method) and returning to the KrutilVertel store from the payment system website, you will be taken to the successful payment page:

On this page you need to indicate your e-mail, where access to download the book will be sent.

If you are already registered on our website, then simply follow the link to your personal account.

The book you purchased will be in your personal account, from where you can always download it.

Please note that after making the payment, you need to return back from the payment system website to the KrutilVertel website.

If for some reason you did not return back to the site and closed the payment system tab with a message about the successful completion of the payment, please let us know - we will send you a letter indicating access to download the book.

Reasons for frequent burnout

Another problem with Toyota Camry lighting devices is the frequent burnout of lamps. There can be many reasons and prerequisites for this:

1. The lamps themselves are of poor quality;
2. Poor quality headlights (poorly ventilated, moisture ingress);
3. Starting the engine with low beams on;
4. The headlight is poorly secured;
5. The lamp in the headlight is poorly secured, poor contact with live parts;
6. Malfunctions of the vehicle's on-board electrical network.

If everything is more or less clear with the first five reasons: choose a high-quality lamp, headlight, do not start the car with the headlights on, securely fasten the headlights and lamps, check and tighten the contacts, then it will be quite difficult to figure out the electrical wiring yourself.

Problems when paying with bank cards

Sometimes difficulties may arise when paying with Visa/MasterCard bank cards. The most common of them:

1. There is a restriction on the card for paying for online purchases
2. A plastic card is not intended for making payments online.
3. The plastic card is not activated for making payments online.
4. There are not enough funds on the plastic card.

In order to solve these problems, you need to call or write to the technical support of the bank where you are served. Bank specialists will help you resolve them and make payments.

That's basically it. The entire process of paying for a book in PDF format on car repair on our website takes 1-2 minutes.

If you still have any questions, you can ask them using the feedback form, or write us an email at [email protected]

Replacing the high beam lamp Camry V40

The high beam lamp is located in the inner corner of the headlight assembly. It changes in the same way as the low beam lamp. You need to turn the base of the lamp a quarter counterclockwise, remove the lamp and disconnect the connector. Install in reverse order.

Replacing the Camry V40 clearance lamp

The marker lamp is located just above the light gray turn signal lamp socket, and has a black base. Turn the lamp 1/4 turn counterclockwise, remove the lamp and remove it from the socket.
Then insert the new lamp into the socket, install it in the headlight and turn 1/4 clockwise, fixing it.

Replacing lamps

Important! Do not touch the glass part with bare hands, as remaining fingerprints will significantly reduce the life of the part.

Replacement occurs the same in all cars, regardless of the series and year of production. To replace the low beam bulb on a Camry V30, V40 or V50, you must perform the following procedure:

• open the hood to gain access to the interior of the engine compartment;
• remove the negative terminal from the battery. This is necessary in order to avoid short circuits due to careless actions;
• disconnect the terminals located on the lamp base;
• to remove the product, you need to turn it counterclockwise;
• install the new part into the seat and fix it in the socket by turning the body a quarter clockwise;
• connect the battery terminals;

Remember! If fingerprints remain on the flask during work, it is necessary to remove them using a napkin or short-pile cloth pre-soaked in alcohol.