Engine and gearbox number

Toyota Wish is a family minivan, produced in two generations. The standard equipment includes gasoline engines of the 2ZR-FAE, 3ZR-FAE, 1ZZ-FE series, and on later models - 1AZ-FSE. No manual transmission was installed, only automatic transmission. Toyota Wish is a car with both front-wheel drive and all-wheel drive. A passable, reliable, relatively inexpensive car to maintain, which has received a large number of positive reviews.

Toyota Avensis body number: standards and VIN decoding

From this article, a new car owner will learn what the numbers that are stamped on engines are needed for.
The abbreviation of three Latin letters VIN will be deciphered. The car enthusiast will also find out what the VIN is used for. When buying a Toyota Corolla car, the selling and buying car owners check the identification data marked on the vehicle with the information written in the documents for the car.

But many beginners do not know where the engine number is, what the VIN code is and why it is needed on the vehicle.

Description of the timing drive

The GR mechanism is driven by a homogeneous chain, the pitch of which is 8 millimeters. The chain tension is adjusted using a hydraulic tensioner. Despite the practicality and reliability of use on many other timing chain drive engines, not everything turned out well on the 1zz fe:

1. The first negative is that the chain rattles, the motor is too noisy.
2. The hydraulic tensioner on this series of engines is not reliable enough and quickly fails. Compared to a roller that tensions a belt.
3. The shoe and tensioner damper wear out before the chain, and cause the latter to quickly stretch.
4. The chain drive has to be serviced before replacing the belt. According to the manufacturer's recommendations, the chain must be replaced after 200,000 kilometers. In reality, it often has to be changed at around 150 thousand km. With the change of the chain, it is necessary to replace other components of the timing drive: sprockets, damper, tensioner. Old parts, even if they are in good condition, will reduce the service life of the new chain.

The only part that cannot be replaced is the camshaft sprocket, which controls the intake valves. Since it is synchronized with the VVT-i mechanism drive. This does not apply to engines produced before 2000, since the VVT-i mechanism was not used on them.

[email protected]: Where is the engine number for Toyota Avensis, sedan, 1.8 liter engine, model year.

Brashura Toyota Avensis body number: The Toyota Avensis code provides up-to-date information about the source, provides professional technical data of the car, and provides information about the model year. A completely simple way to reduce fuel consumption has been found! An auto mechanic with summer experience also didn’t believe it until he tried it. And now he saves 35 rubles a year on gasoline!

Various manufacturers used their own internal designations, unique to their concepts. Car model where is the engine number? Where is the damn number on the 3s engine? Since this year, global ISO standards have been adopted, providing a holistic, unified format for Vin numbers. Where is the Toyota Avensis body number applied?

Mandatory for solid parts of the metal case in the form of special table numbers. It will be interesting to know that the code allows the use of not only Latin letters, but also Arabic numerals. The VIN number of the Avensis body consists of 3 main blocks: The first block always consists of 3 characters, but uniquely identifies the vehicle manufacturer.

The first character indicates the general geographic area, the second indicates the state of the manufacturer, and the third indicates a specific model brand. Replacing the Fuel Filter in a Toyota Camry V40 A properly functioning fuel filter is important to the full performance of the engine. It cleans the fuel from contaminants and some impurities.

This way the engine is protected from premature wear. However, on any machine it must be changed regularly. Think about how the fuel fill should be replaced. Replacing the Toyota Corolla Alternator Belt. Read and see how to change the alternator belt on a Toyota Corolla. A motorist should never forget that a car is first a technique, and it has the ability to break down, usually always suddenly.

Although can a breakdown be expected? When going on a long-term or not so long trip, you must always be prepared for any surprises. Replacing the battery in a Toyota Corolla key. A Toyota Corolla car key is a small device that controls the anti-theft system and may have an integrated transponder. The battery needs to be replaced frequently, otherwise you risk not getting into the car one day.

What are there? The body comes in three versions: Replace the fuel filter on a Hyundai Accent It is advisable that the operation of replacing the fuel filter on a Hyundai Accent be carried out at a specialized station, since this procedure requires certain knowledge and skills.

However, many motorists prefer to perform all necessary maintenance themselves. In some cases, the 3rd WMI number may indicate the type of vehicle. Asia is the geographical region that includes Japan, where Toyota Avensis is produced. Many experts call the second block the descriptive part of the code. This is true, because VDS consists of six characters that describe the technical characteristics of the model.

It is worth noting that the sequence of the indicated letters and numbers depends entirely on the wishes of the manufacturer himself.

VDS describes data about the model, body type, configuration, power plant model, etc. I don’t know where the engine number is located. Where is the engine number? The manufacturer of Toyota Avensis, like Russian and some European automakers, does not indicate the control figure at all.

As a rule, this is the lot of American and Chinese cars. The third block or VIS characterizes the distinctive features of the car. Where is the engine number 1zz-fe 1. Interestingly, the last characters of this code must be in the form of numbers. Regarding specific characters: The first VIS character indicates the model year of the vehicle produced; The following symbol gives a general idea of ​​the brand.

Please note that information about the year and manufacturer is only arbitrary. For example, Toyota may not indicate data on the model year at all, since the standard only recommends that they adhere to these recommendations, but does not impose any obligations.

Toyota VIN has been applied to the body since the year in the form of a digit number. Find out where the Toyota Avensis body number is located, where is the Toyota Avensis body number applied? Models produced specifically for the European and American markets have different numbers. How to find the engine number of Toyota corolla How to find the engine number of Toyota corolla 1 6 vvt i g in Friends, if you are interested in a review of this Toyota car.

On Toyotas, the identification number is located at the top of the dashboard. Explanation Here is how the body number of Toyota models, including the Avensis car, intended for the European market, is deciphered: From 1 to 3 position Vin: As a rule, it can look different: It is customary to mark Avensis engines as follows: T is the model identification Avensis; The 7th position after a year also indicates the equipment with security systems.

For example, if a car is equipped with 2 standard airbags, then this is indicated by the number 0, but 8 is, in addition to the front airbags, also side airbags; The 8th position after the year indicates the model: For example, if the car of the year is 4, the year is A, the year is X and so on; Position 11 is information about the plant.

Who knows where the Toyota engine number is and where the Avensis number is located. Arabic numerals from 0 to 9 indicate Japan. As for models for the American market: The rest is the same as for the European market. Car or living legend: Toyota Avensis in Russia Toyota Avensis is the most popular car in our country.

Where is the engine number on a Toyota Avensis? It replaced the famous Toyota Carina. This happened in 2010. Compared to its predecessor, the Toyota Avensis has a longer wheelbase and body length.

The first generation car was delivered to Russia in 3 body variations: Where is the engine number for a Toyota Avensis, sedan, 1.8 liter engine. An urgent and accurate answer is needed, the first one to answer correctly. As for the engines, they included as many as 6 power plants, including gasoline, diesel and turbo-diesel units. In this article we will talk about why a Toyota Corolla may have difficulty starting or not start at all.

Toyota Rav 4 or Mitsubishi Outlander. After changing the oil in the box, I decided to change it myself in the engine. I think it's complicated. I twisted the plug, drained the waste, removed the filter... But I didn’t take it off immediately and simply: Tolya got stuck on the rubber band, or it was too long. The first generation gained enormous popularity not only in the country, but throughout Europe. We still have these legendary cars running around today.

Where is the Renault vin number decoding vin renault fluence vin code renault megane 2, where. Where is the VIN number of Renault Megane 2 Naturally, body parts and other important parts and components of the car were promptly replaced by the owners, otherwise the first generation Toyota Avensis would not have withstood so much.

The second generation of Toyota Avensis, designed by the French designers of the Toyota office, implied an even greater increase in the wheelbase and lengthening of the chassis. Now the new Toyota Avensis looks more and more like a luxury car.

There were also 2-liter gasoline units - l. It was much easier to find spare parts for the second generation Toyota Avensis. They were supplied by dealers at the official level, or you could use auto dismantling services. The 2-liter turbodiesel Toyota Avensis of the second generation deserves special attention.

Its turbine geometry was variable. With the onset of the year, the manufacturer is preparing a surprise for fans: In the same year, the Toyota Avensis will undergo an external restyling.

The car receives new body parts, including a stylish radiator grille, new headlights, updated interior parts, and so on. Avensis body parts are still in great demand today. These are body parts, optics, glass, various suspension elements, radiators and much more.

2ZR-FAE – second generation engine

The second generation was equipped with the 2ZR-FAE internal combustion engine, less often with the 3ZR-FAE. The 2ZR-FAE modification differs from the basic 2ZR configuration by a unique Valvematic gas distribution system, as well as an increased compression ratio and increased engine power by 7 hp.

Engine Toyota Wish 2ZR-FAE

Frequent malfunctions of the 2ZR line:

• Increased oil consumption. Not associated with any design features. Often the problem was solved by pouring high-viscosity oil, for example, W30.
• The appearance of unpleasant noise and knocking. Both the timing chain tensioner and a loose alternator belt may be to blame for this, but this is less common.
• The average service life of the pump is 50,000-70,000 km; at the same mileage, the thermostat often fails.

The 2ZR-FAE unit turned out to be more acceptable and successful than the 1ZZ-FE. Its average mileage is 250,000 km, after which it requires major repairs. But some car enthusiasts, to the detriment of the engine’s life, turbocharge it. Increasing engine power will not be a problem; a ready-made kit is available for free sale: turbine, manifold, injectors, filter and pump. You just need to purchase all the elements and install them on the car.

VIN: TOYOTA | CARInfo

Where is the identification data located?

It happens that the car owner himself does not know where the Toyota engine number is located. Since this is difficult to do on older models. It is necessary to clean dirty areas, especially those where the pointed sides of the metal sign are visible. These can be the side parts of the doors and even on the original rims of the car.

To find out where the car engine number is located, you need to look at the following places:

Many beginners confuse the meaning of the engine code and VIN, so they often doubt where the engine number is located and whether it is correct. And attackers can easily mislead such a person.

Features of the design of the KS mechanism

On the 1zz fe power unit, the piston travel distance has been increased. Due to this, traction at low speeds has been improved and heat loss has been reduced. But due to the faster movement of the piston, the engine lubricant was not completely removed from the cylinder walls. Which was another reason for coking and sticking of the rings. Therefore, on this engine model, high demands are placed on the piston rings.

At the front end of the crankshaft there is a pulley. It drives auxiliary mechanisms through a belt drive. For overall engine compactness and for less friction, the diameter and length of the crankshaft journals have been reduced. Such savings did not go unnoticed; loads increased and wear on the crankshaft increased.

For the same purpose, to reduce friction, the piston skirts were modernized. They were made smaller. Which negatively affected the cooling ability of the pistons. The pistons were designed in a T-shape. These changes also had a negative effect. In the upper MT, the pistons began to knock earlier than what happened with previous models of the piston system. The pistons and connecting rods are connected using floating pins. And the covers are connected to bolts that are directly screwed into the adjacent part of the connecting rod.

Vin number of Toyota Auris - where is the vin code located

The Toyota Auris VIN number is located:

Decoding the Toyota VIN code

For the European market: From 1 to 3 positions of the VIN number - the world manufacturer index (WMI).

The following marking options are available

1NX TOYOTA USA Passenger Car 1T1 TOYOTA USA Passenger cars for Europe 1TE TOYOTA USA Multipurpose Passenger Vehicle 4T1 TOYOTA USA Passenger cars for Europe 4X2 TOYOTA USA Passenger cars for USA/CAN 4X3 TOYOTA USA Multipurpose Passenger Vehicle 4X4 TOYOTA USA 4X6 TOYOTA USA 4X7 TOYOTA USA for Australia and “3-d countries” 4X8 TOYOTA USA 5TD TOYOTA USA Truck 5TD TOYOTA USA Passenger Car 5TE TOYOTA USA Multipurpose Passenger Vehicle 5X0 TOYOTA USA 5X3 TOYOTA USA Multipurpose Passenger Vehicle JT1 TOYOTA Japan Passenger cars for Europe JT2 TOYOTA Japan Passenger cars for USA/ CAN JT3 TOYOTA Japan Multipurpose Passenger Vehicle JT4 TOYOTA Japan JT5 TOYOTA Japan Incomplete Vehicle JT6 TOYOTA Japan JT7 TOYOTA Japan for Australia and “3-d countries” JT8 TOYOTA Japan JTA TOYOTA Japan JTB TOYOTA Japan Truck JTC TOYOTA Japan JTD TOYOTA Japan Passenger Car JTE TOYOTA Japan Multipurpose Passenger Vehicle JTF TOYOTA Japan JTG TOYOTA Japan Buses JTJ TOYOTA Japan JTK TOYOTA Japan Passenger Car JTL TOYOTA Japan Multipurpose Passenger Vehicle JTM TOYOTA Japan Truck JTN TOYOTA Japan TW0 TOYOTA Portugal TW1 TOYOTA Portugal Lh2 TOYOTA China Passenger cars for Europe MR1 TOYOTA Thailand Passenger cars for Europe NMT TOYOTA Turkey PN4 TOYOTA Malaysia SB1 TOYOTA UK Passenger cars for Europe VNK TOYOTA France Passenger Car 2T1 TOYOTA Canada Passenger cars for Europe 3RZ TOYOTA Mexico 6T1 TOYOTA Australia Passenger cars for Europe AHT TOYOTA South Africa ACU TOYOTA South Africa JHD TOYOTA JHF TOYOTA AHT TOYOTA JTH TOYOTA JTX TOYOTA JYF TOYOTA LCU TOYOTA SB1 TOYOTA MR0 TOYOTA

From 4 to 5, the VIN code symbol is responsible for the car body type (until 2002) 11 - Jeep, minivan (Liteace) with a standard roof 12 - minivan with a raised roof 21 - van with a standard roof 22 - van with a raised roof 23 - van with high roof 31 - Hilux / Single Cab Truck (Dyna) 32 - Pickup / Cab Truck 33 - Pickup / Double Cab Truck 41 - Standard Roof Minibus 42 - Raised Roof Minibus 43 - High Roof Minibus 52 - hatchback, 3 doors 53 - sedan 54 - hatchback, 5 doors 63 - coupe 64 - liftback 72 - station wagon, car LB - liftback, 3 doors LC - liftback, 5 doors 4 position number - body type and wheel arrangement (since 2002 year): A - sedan, 2 doors, 4x2 B - sedan, 4 doors, 4x2 C - coupe, 2 doors, 4x2 D - hatchback / liftback, 3 doors, 4x2 E - high-capacity station wagon (as example - Toyota Corolla Verso) F - convertible, 2 doors, 4x2 G - station wagon, 4 doors, 4x2 H - station wagon, 4 doors, 4x4 J - pickup, 4 doors, 4x2 K - station wagon, 5 doors, 4x2 L - station wagon, 5 doors, 4x4 M - family station wagon (VAN), 5 doors, 4x2 P - pickup, 2 doors (regular cab), 4x4 S - hatchback / liftback, 3 doors, 4x4 T - pickup, 2 doors (extended cab), 4x2 Z - station wagon, 5 doors, 4x2

5 character of the VIN code indicates the type of power unit installed on the car (since 2002)

A - 4A-FE, 7A-FE (1.6 liters, 16 cl., petrol) C - 2C, 2CT, 2CT-E (2.0 liters, 8 cl., diesel) E - 2AZ-FE (2.4 liters, 16 cl., petrol) F - 1MZ-FE (3.0 liter V6, 24 cl., petrol) S - 3S-FE (2.0 liters, 16 cl., petrol) T - 2UZ-FE (4.7 liters, V8, 32 cl., gasoline) Z - 1ZZ-FE, 3ZZ-FE (1.8 liters, 16 cells, gasoline)

6th character of the VIN code - engine or engine series (before 2002)

A - 2A, 3A, 4A-FE, 7A-FE (1.6 liters, 16 cl., petrol) B - B, 2B, 3B, 11B, 13B, 14B, 15B C - 1C, 2C, 2CT, 2CT-E ( 2.0 liters, 8 cl., diesel), 3C E – 1E, 2E, 3E, 4E, 5E F – 1MZ-FE (3.0 liter V6, 24 cl., petrol), F, 2F, 3F G – 1G H – H, 2H, 12H J – 1JZ, 2JZ K – 5K, 7K, 3K, 4K L – L, 2L, 3L, 5L M – 4M, 5M, 7M P – 1HZ R – 5R, 12R, 18R, 21R, 22R S – 1S, 2S, 3S-FE (2.0 liters, 16 cl., petrol), 4S, 5S T – 2T, 3T Z – 1ZZ-FE, 3ZZ-FE (1.8 liters, 16 cl., petrol)

7th character of the VIN code - model line (until 2002)

A – Supra / Celica / Carina B – Carina, Avensis, Coaster C – Previa, RAV4 D – Mega Cruiser E – Corolla F – Lexus LS400 J – Land Cruiser H – Hi Ace, Dyna 100 K – Hi Ace, Stout L – Paceo , Tercel M – Picnic, Liteace N – HiLux P – Starlet, Toyota 1000 R – LiteAce S – Lexus GS300, Crown T – Carina, Corona, Celica, Avensis U – Dyna 200 V – Camry W – MR2 X – Cressida Y – Dyna 100, Dyna 150, Toyoace

Determines the year by engine number. How to find out what year the contract engine is

Sometimes a car owner is faced with the question of where the car’s engine number is located. It can be found by viewing the technical documentation. When a vehicle is released, the manufacturer provides a package of documents. This includes an operating manual that contains this information. It can also be found on the engine itself.

Every car owner should know the place where you can view the digital combination. In case of a stop by traffic police officers, they were able to compare it with the data specified in the technical passport.

By buying a vehicle on the secondary market, knowing where the license plate is located, you can protect yourself from various awkward situations when they might sell a stolen car.

Where can the digital number combination be located?

The document indicating that the car has passed state registration usually indicates the engine number. If it is missing, you can use the data from the technical passport. When purchasing a used car and the former owner did not provide an instruction manual, it can be found on the Internet. It must match this model.

If you need to find the location of the engine number directly on the unit itself, you should do the following: open the car hood and find a plate on the engine where it can be written. For different models it is located in different places. It can be:

Older models have a special aluminum plate, small in size, where all the vehicle data is indicated.

How can I find the number on the engine?

When buying a car at a dealership, you can ask the dealership employee about the place where the engine number is stamped. Even if he doesn't know it, he will make every effort to please the customer.

If you buy a car at a car market, when drawing up a document about the purchase and sale or a general power of attorney, you need to ask the seller where to look for the engine number of his car.

If the engine is not very dirty, you can clean it at home by moistening a rag in a special solution.

Washing an engine when a large layer of dirt has accumulated is a rather complicated procedure. Then it is better to wash the power unit at a car wash. This is the only way to examine all the cavities and secret places.

Service station specialists involved in major repairs of engines of different brands of cars can also tell where it may be located.

At the station where diagnostics and examinations are carried out during MREO, they will show this place. Since they are engaged in reading license plates, registering and registering cars, they will help the owner for a small fee.

Read more: Marshal tires manufacturer country

In some brands of cars, for example, in Ford, the engine number is located in such a way that its search must be carried out using a mirror with a long lever. This location is located under the oil filter. It is covered by a special metal plate that protects the oil pan. If there is no mirror, you will need to remove this plate to identify the number, which will take some time.

When buying an American vintage car, many owners do not even realize that the engine number is missing. When stopped by a traffic police inspector, this fact must be indicated. To prove your words, a statement is written to the management of the traffic police. Attached to it are certified copies of documents indicating that the car was purchased. Sometimes such cars were taken from their owners into the penalty area.

Then a request is written to the manufacturing company and tuning studio in the country where it was purchased. You need to ask them to document that a specific car was purchased by a specific person.

Also additionally attached is a technical document confirming registration until the moment when the “upgrade” began and indicating its condition. This task is quite painstaking. To carry it out you need to be patient and have some time.

Having resolved controversial issues after submitting documents, the car will be returned from the impound lot to the owner, without imposing penalties on him. This doesn't happen often, but it does happen. And you need to know how to act correctly in such a situation.

BC head

The cylinder head of the 1ZZ FE power unit is made of light alloy aluminum. The combustion chamber is made in a conical shape. This KS design promotes swirling of the compressed, combustible mixture. As a result, combustion of the latter occurs with greater efficiency and less possibility of detonation. Ultimately, all technical indicators of the power unit are improved.

The cylinder head valve seats are created using laser spraying. They differ from pressed ones in their smaller thickness. This promotes better heat transfer from the valves to the body of the BC head. In a conventional valve design, heat is removed through the stem, but here additionally through a plate. The thin coating thickness and thin valve stem made it possible to increase the size of the seats. This contributed to an increase in the flow of intake air and exhaust gases.

The weight of the valves has decreased, therefore, the load on the spring mechanism has decreased. Therefore, the pusher cams were reduced in order to reduce resistance losses. This cylinder head design does not provide for adjustment by selecting washers. Instead, pushers of different thicknesses were invented. This made the valve adjustment process very expensive. As a result, some drivers refuse to adjust valves on time, which leads to negative consequences.

The negative aspects of new, progressive solutions include the impossibility of repairing the cylinder head due to the non-repairable design of the seats.

Engine number on Prado 120 and other markings, their location and meaning

Car manufacturers have the right to place engine markings on any parts of the unit; there is no uniform standard. For example, domestic factories place marks on the left half of the cylinder block. For a Toyota Land Cruiser Prado 120 (4L), the code is more difficult to find:

A mirror with a long handle, which is used by traffic police inspectors, helps in the procedure. The engine numbering consists of letters and numbers that mean: model, unit number.

Sometimes the marking sticker on the left front pillar of the driver's door remains. It contains the engine number for the Prado 120 4L, the displacement of the car, the type of engine (gasoline or diesel).

According to the marking of the power unit, they keep records in the traffic police: they track the history, put stolen cars on the wanted list, etc. Until 2021, replacing the entire engine or its marked components (for example, the cylinder block cover) was a headache for motorists. Since the beginning of October 2021, Order No. 399 of the Ministry of Internal Affairs of the Russian Federation dated June 26, 2018 has been in effect, according to which you can simply replace parts that have served their purpose. When selling or registering, the inspector checks the engine number to make sure it is not stolen. That's all. The procedure also takes place when selling a car.

On the Prado 120, not all models have a body number: until 2005, a nameplate was installed under the hood, but later they stopped writing it. There is an identification code that is located on the frame of the car and must be recorded in the vehicle title, technical passport, and customs documents. The frame number of the Prado 120 with a 4-liter engine is indicated in the same place as the code of the earlier 95 model: under the front right wheel arch. The numbers are covered with an elastic band that must be bent to see them.

VVT-i system

At the end of the second millennium, Toyota developed a new VVT-i system. She became responsible for adjusting the fuel distribution phases. This system is a mechanism that changes the position of the exhaust camshaft relative to the drive sprocket. The mechanism makes the largest rotation at 60.

The system drive is presented in the form of a rotor with blades. Before starting the engine, the rotor shaft is fixed at the latest ignition. This position ensures easy starting of the power unit. After starting the engine, oil enters the rotor cavity, the flow of which is regulated by an electromagnetic valve. It is controlled by a controller. Which receives information from sensors that control the operation and position of the camshafts. The power of the oil flow provides advance or retardation of the valve timing. Ultimately, the driver hears the clear operation of the power unit.

How to decipher the engine number?

The engine number is deciphered in accordance with the international standard ISO 3779. When answering the question of how many digits are in a car’s engine number, let’s pay attention to what characters make it up. These are 17 characters of numbers and letters of the Latin alphabet. Due to the similarity of the symbols I, O, Q to the numbers 1 and 0, they are not used in number combinations.

The meaning of each symbol is a characteristic of the car. With its help it is determined:

Read more: Mercon lv automatic transmission

The number contains a control number indicating its originality.

It consists of 3 parts:

The first 3 characters of the first part are the designation of the manufacturer's international indication code. The first symbol is the geographical zone, the second is the country located in this zone, the third is the specific manufacturer.

A manufacturer may have multiple WMIs. But different manufacturers cannot use the same number. Only after 30 years have passed after its first use can it be assigned to another.

Despite the fact that the standard clearly defines the manufacturer's mills, this is often not used. On cars of the General Motors division with its head office in Germany, the WO sign is placed, regardless of the country of origin.

The second part of the number, consisting of five characters that describe the characteristic features of the car:

Description of exhaust and exhaust manifold design

The location of the collectors in the 1zz fr engine has been changed. The intake manifold is located in front of the engine, and the exhaust manifold is located at the rear. This design is made to quickly heat the neutralizer to ensure compliance with environmental standards. However, the high engine temperature negatively affected the functioning of the converter. Therefore, it was moved under the bottom of the car.

The intake manifold has an elongated shape. This improves the operation of the unit at low and normal speeds. To create this shape, we had to remove the old cast manifold; now it is made of aluminum, consisting of four air ducts connected by welding to one flange.

The negative side of this design is the insufficient reliability of connections through welding. The advantage is that the aluminum surface of the air duct is smoother when compared with cast iron.

After 2000, the design of the intake manifold was significantly simplified. It took the form of plastic pipes. As a result, the heating of the incoming air decreased, and production became cheaper.

Where is the forklift data plate located?

Each forklift is equipped with a plate with technical information that applies specifically to that machine. It is mounted on the dashboard, usually under the control levers. In fact, a lot of data is reflected there: model, load capacity, serial number, engine type, tire size, and that’s not all. In this article we will look at how to determine the maximum load capacity of a forklift and decipher each of the elements of the table.

Loader Information Plaque Location

Why is this information even needed? Knowing the model, serial number and year of manufacture of the loader allows you to correctly select spare parts and components for a specific machine when undergoing maintenance. And knowledge of changes in the center of mass depending on the load allows you to prevent unforeseen situations in the warehouse, thereby ensuring the safety of personnel and cargo.

Technical characteristics of the Toyota 1UR-FSE 4.6 liter engine

Read more: Certificate of acceptance of the car for repair form

1 Vehicle operating rules 1- 18 Toyota Vitz engine repair 19- 38 Cooling system 39- 42 Engine lubrication system 43 Fuel injection system 44- 51 Ignition system 52- 56 Charging system 57- 58 Toyota Vitz clutch 59- 63 Manual transmission 64- 68 Automatic transmission 69- 77 Drive and propeller shafts 78- 80 Rear axle 81 Toyota Vitz suspension 82- 90 Steering 91- 99 Toyota Vitz brake system 100- 109 ABS, TRC, VSC system 110- 118 Body 119- 125 Air conditioning system 126- 127 Toyota Vitz Vitz engine and body numbers Identification Identification plate The placement of the identification plate is shown in the figure.

A - vehicle identification number (v1n), B - identification plate. The engine number is stamped on the cylinder block; the location of the number is shown in the corresponding figure with an arrow.

Technical characteristics of engines installed on Toyota Vitz Note: the given power and torque values ​​(Jis standard) are approximate and may vary depending on the specific modification and year of manufacture, but in most cases the error does not exaggerate ±5%. Engine

Decoding the model code

Toyota Vitz car engine series. SC - engines of the “SZ” series (1SZ-FE, 2SZ-FE). NC - engines of the “NZ” series (1NZ-FE, 2NZ-FE), Toyota model. P - Vitz / Platz / Funcargo family Model generation, engine, drive.

D. Certification (compliance with environmental standards). GF - for gasoline engines (since 1998) TA - for gasoline engines (since 2000) Model name. A - Vitz Body type of Toyota Vitz. G — 3-door hatchback N — 5-door hatchback Gearbox type.

Toyota Vitz engine type. K - gasoline engine with distributed fuel injection, DOHC (1SZ-FE, 2SZ-FE, 1NZ-FE, 2NZ-FE). Abbreviations and symbols Abbreviations 2WD front-wheel drive models 4WD all-wheel drive models A/C air conditioning A/T, automatic transmission automatic transmission ABS anti-lock braking system BA emergency braking system EFI electronic fuel injection system EVAP evaporative emission system ISCV idle speed control valve J/B. mounting block J/C connecting connector MT, manual transmission manual transmission O/D overdrive OFF, OFF disabled ON, ON enabled R/B relay unit SRS safety system TRC traction control VSC stability control VVT variable valve timing system battery BMT battery timing top dead center. gas distribution mechanism VCU power steering gearbox gearbox UOZ ignition timing electric motor electric motor electromagnetic

10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43. 44. 45. 46. 47. 48. 49. 50. 51. 52. 53. 54. 55. 56. 57. 58. 59.60. 61. 62. 63. 64. 65. 66. 67. 68. 69. 70. 71. 72. 73. 74. 75. 76. 77. 78. 79. 80. 81. 82. 83. 84. 85. 86. 87. 88. 89. 90. 91. 92. 93. 94. 95. 96. 97. 98. 99. 100. 101. 102. 103. 104. 105. 106. 107. 108. 109. 110. 111. 112. 113. 114. 115. 116. 117. 118. 119. 120.121. 122. 123.124.125.126.127.