Frameless wipers Wipers for Toyota Corolla cars are made in various designs. This is due to the years of production of individual car models. The size of Toyota Corolla windshield wiper blades also has different meanings.
Selecting brush type
There are several types of wipers.
Frame
The cheapest and simplest type. The essence of its design lies in a supporting metal frame, from the bottom of which an elastic band is attached using movable rocker arms. It is these rocker arms that ensure complete adherence of the wiper to the glass.
Cons: In cold weather, these brushes lose their flexibility due to the fact that snow or ice gets into their moving parts.
Frameless
In them, the rubber band fits tightly to the glass thanks to a special flexible plate. In addition, such wipers have a special shape, thanks to which they adhere better to the glass at high speeds. Unlike the first type, such brushes are not subject to freezing.
Disadvantages: in this design it is impossible to replace the elastic band, and the whole thing changes.
Hybrid
They are frame windshield wiper blades that are devoid of disadvantages. Their rocker system is protected by a rubber box from snow and ice. This is exactly the type that comes in the original delivery to Toyota.
Important! In no case should you wipe the wiper blade before installing it, as you can damage the special graphite layer on it, which will lead to loss of the properties of the blade.
Basic moments
To replace windshield wipers on Toyota RAV4 models, you should start with a short introduction. Frame, frameless and hybrid types of windshield wipers are used for the front, rear or passenger window of a car. Each of them is presented in the form of a huge list of suitable models. It is better to give preference to original parts - there will be fewer problems.
Selecting and installing wipers on Corolla
The following sizes of wipers are installed on the Corolla 120:
- Driver side length: 24 inches (60 cm).
- Passenger side - 16 inches (40 cm).
Sizes of brushes that are installed on Corolla in the body 150 (2008–2014) and 160
- Driver's side - 26 inches (65 cm).
- Passenger side - 13 inches (35 cm).
Installation
As you can see in the picture below, the original wiper blade for Toyota Corolla has a “Hook” type of fastening. Take the new windshield wiper and open its plastic cover at a 90 degree angle, as shown below.
In the folded lid you can see a hole through which you need to insert a hook.
Now we insert the hook into the latch, as shown in the photo below.
And close the plastic lid until you hear a characteristic click. Closing allowed the windshield wiper to be secured.
It is worth noting that it is not necessary to change the entire brushes if their rubber bands have become unusable. It is enough just to change the rubber bands themselves. A rubber defect can be diagnosed by the water stains it leaves after moving across the glass. The worker should not leave marks.
Quick comparison
I offer brief recommendations for wipers. Choose what is more important to you and buy. A detailed description, installation video and price comparison are below.
Frameless wipers for Corolla IX
An excellent option is the Bosch Aerotwin Retrofit AR 601 S kit (article number 3397118907). Durable, easy to clean in any weather, no squeaks. They are made in Belgium. Read more about Bosch Aerotwin.
SWF piece brushes : 600 mm (code - 860, article - 119860) and 400 mm (code - 840, article - 119840). These wipers also have the “original” mount. SVF is part of the Valeo group; windshield wipers are produced in Poland and France. Read more about SWF wipers.
Replacing the windshield wiper rubber
Let's look at the example of a replacement on the 150th body of 2010. To replace the rubber, you need to remove the wiper from the holder by opening its plastic tab.
It is important to know. In frameless wipers, it is impossible to replace the rubber band, and you will have to replace the entire wiper.
To carry out this operation you do not need any tool. The elastic bands are fixed with metal guides, shown by the red arrow in the photo below. We unclench the special staples, and then tighten the elastic band. We pass the new rubber through all the guides. Trim off the remaining excess elastic.
Intermittent wiper does not work
This manifests itself in long pauses or in the fact that the windshield wiper drive may turn off completely. The most common reason that the intermittent wiper mode does not work is the relay, which counts a certain time interval before turning on. Over time, the contacts on this device begin to oxidize or burn, preventing current from passing through them. The solution to the problem is simple: cleaning the contacts of the relay, which is located in the mounting block of the car. Before cleaning, you must turn off the power by disconnecting the negative terminal of the battery.
Malfunctions
If the windshield wiper does not work after replacement, you need to determine where exactly the problem lies. To do this, you need to disconnect the plug box from the switch located under the dashboard by connecting its terminals to the terminal block of the last node. The brushes have resumed operation - the switch is faulty, everything remains as before - the problem is in the replacement unit itself. It is also possible that the wiper operates at high and low speeds, but does not move in intermittent mode. In this case, you will have to look at the node relay.
If such a procedure is too complicated for the average vehicle owner, it is much easier and faster (but not cheaper) to have the car repaired. Parts can be replaced by experienced workers in a matter of minutes.
Thanks to watching the visual video, there should be no problems with replacing the original wipers.
Post Views: 3,095
Repair of Toyota Corolla windshield wiper trapezoid, blades and wipers: dimensions, length and how to remove
Replacing windshield wiper rubber bands on Toyota Prado 150
The volume reduces visibility through the glass, and dirt constantly and gradually flows onto the glass.
Unsubscribe from toyota corolla wiper blades and related listings will disappear from your eBay feed. At…
On the passenger side - 13 inches 35 cm. Behind the insulation it will be visible that the air flow is supported by pistons. It is necessary to remove the trapezoid and clean all movable mechanisms from accumulated dirt.
This is exactly the type that comes in the original delivery to Toyota. These qualities are important in those moments when the car is moving at maximum speed. If you do not replace the brushes on time, then the unwanted process of abrasions and scratches begins to form on the glass.
The cost of such models is quite high, but they will last much longer.
The price will pay off with incredible reliability over long-term use. How to replace and care for your windshield wipers It is important to use blades that are appropriate for the season. So the options for summer are neater, smaller in size and fully functional.
It is also necessary to choose the correct size. Replacing windshield wiper blades is done as quickly as possible.
This can be done with plug-type connectors, which are specially provided in the design. Now this operation does not require time and special adapters.
How often should wipers be changed?
No one will give you a definite answer, but on average about 1–2 times a year. Many car enthusiasts start replacing only when they are unhappy with the unproductiveness of their work. The service life is influenced by many factors:
- use of chemicals in car washes;
- negative temperature effects;
- price factor;
- quality of windshield wipers;
- in winter, the road is covered with salt, sand, etc. and this has a destructive effect.
As a result of all these influences, the rubber quickly “hardens”, and accordingly, the fit is significantly reduced. This is also affected by the condition of the hinges (applies to frame wipers).
When the glass is cleared with only 3-4 strokes, and the wiper operating area on the glass becomes clearly visible, it means it’s time to change it. This problem does not exist with brushes with a wear indicator (special paint is applied). When its color changes, it means replacement is necessary. Approximately such a check should be done once a year.
We recommend:
We disable the immobilizer with our own hands on different models
Types of brushes for Toyota Corolla E150 (2006-2013)
Our specialists will help you choose the size required for your car model. It is also worth considering that the cleaner brushes will wear out less if you care for them properly. In the instructions, the manufacturer indicates that it is necessary to monthly treat the rubber elements and lubricate the entire brush with certain compounds. This provides for both high quality of the product in operation and long service life.
The best modern materials for cleaners are silicone with graphic and Teflon coating. This composition reduces the friction of the brush on the glass to almost zero and does not rub the glass. Replacing and caring for wipers You should not use winter wipers in the summer, and vice versa.
After all, winter brush holder covers are dirt collectors due to poor sealing and large volume. The volume reduces visibility through the glass, and dirt constantly and gradually flows onto the glass. Summer brushes have a neat appearance, smaller sizes and excellent functionality. To replace the blades, the Toyota Corolla windshield wiper design includes plug connectors that are original in design, so that the blades can be changed in a matter of minutes or even seconds.
The trapezoid is a mechanism by which the brushes are driven, that is, it is a kind of lever system.
In the E body there are no problems with this mechanism, but in the E body such breakdowns are common.
The windshield wiper has stopped handling water or snow. Noise during operation. Brush play How to remove the trapezoid? Let's look at the removal of this mechanism using the example of the Corolla of the year. You can repair this element by purchasing a repair kit, or buy a completely new one. The first step for repair or removal is to de-energize the system: After this, remove the wiper arms. To do this, the brushes must be in their original position, after which we begin removal.
At the base of the levers there is a plastic protection, under which a nut will be located. The plastic can be removed by picking it up with a flat screwdriver, and the lever itself can be dismantled using a wrench. Now you need to remove the air supply box: Behind the insulation you will see that the air supply is held on by pistons.
How to change windshield wiper blades on a Toyota car
If you press their middle with a screwdriver, they will unlock. When removing the box, you must remove the left and right parts separately. The next step to repair the Toyota Corolla windshield wiper trapezoid is to disconnect the wiper drive motor chip, after which you need to unscrew the two bolts securing the trapezoid itself.
By detaching the rear rubber holder, you can remove the trapeze from the car. The intermittent wiper mode does not work. This results in long pauses or in the fact that the windshield wiper drive may turn off completely.
The most common reason that the intermittent wiper mode does not work is the relay, which counts a certain time interval before turning on. Over time, the contacts on this device begin to oxidize or burn, preventing current from passing through them.
Step-by-step replacement instructions
Replacing wipers always does not mean a complete replacement, but only a component of it. They always consist of 3 main elements:
- metal holder connected to the lower arm;
- the lower arm extends from the glass;
- the rubber brush itself.
The brush is a consumable item that needs to be changed frequently. Their cost ranges from 300–700 rubles. Original products will cost more. First you need to determine which wipers are best for you.
The assortment is quite rich, models from different brands: frame, frameless, hybrid. All of them, of course, have both positive and negative qualities. Therefore, it is best to follow only the recommendations of the car manufacturer, and not advice on the market. They give precise parameters and even describe specific brands, indicating the exact catalog number.
Some manufacturers that produce these products immediately indicate the applicable model and make of the machine. So that even a person with little knowledge can understand which machine a specific part is applicable to.
If this option does not suit you, then select similar installed ones, if, of course, you are satisfied with their quality of work.
Take measurements before going to the store. Because for most cars they are individual and it is necessary to measure both wipers. If you find it difficult to determine the type yourself, then carefully remove the old brushes. Just remember to place a cloth under the wiper arms so that the glass does not come into contact with the metal.
Windshield wiper manufacturing technologies
Manufactured by the world's best manufacturers, the wipers almost exactly follow the topography of the windshield and have sufficient flexibility to effectively remove water and other contaminants from it.
Other important advantages of modern Toyota Corolla windshield wipers include their long service life and stability in operation, as well as sufficient resistance to wind loads. After all, these qualities are decisive when a car is moving at high speed.
To achieve these qualities, synthesized materials from two types of rubber are used in the production of windshield wiper working parts. The part adjacent to the glass is made of hard rubber, due to which a high degree of cleaning is achieved. The upper one is soft, making the operation of the device smooth and almost silent. This combined composition of the material allows wipers to remove everything from the surface of the glass with minimal load on the power unit of the trapezoid.
Currently, the introduction of new materials and new technologies is becoming more and more intensive. Manufacturers of goods for the automotive industry try to use only those materials that fully comply with European quality and standard requirements. This provides for both high quality of the product in operation and long service life.
The best modern materials for cleaners are silicone with graphic and Teflon coating. This composition reduces the friction of the brush on the glass to almost zero and does not rub the glass.
Tips for use
- Before use, it is advisable to treat them with soapy water.
- Monitor the quality of liquids with which the brush comes into contact during its operation, use them only in accordance with the instructions.
- Rinse frequently with water to remove large dirt particles.
- Lubricate the hinge joints periodically.
- Prolonged exposure to frost and sun will shorten its service life. And therefore, in the summer, when parking for a long time, it is better to cover the car or at least cover the windshield. And in winter, the car should be in the garage.
- Wash your windshield more often; this service is free at many gas stations.
- If the glass is covered with ice, do not use windshield wipers; it is better to clean it manually with a special scraper.
- In cold weather, during long periods of inactivity, you need to raise the wipers so that they do not freeze.
- Try to buy brushes only from well-known manufacturers, they will pay for themselves.
- It is not recommended to use windshield wipers without windshield washer.
We recommend:
DIY car windshield crack repair
These tips will help many beginners save money. After all, simple car maintenance work can be done on your own. This is both more pleasant and more reliable sometimes. We wish you to see the road equally well in any weather. Safe and clear road!
