Replacing brake pads for Toyota Corolla 2008

The safety and comfort of driving the Toyota Corolla 150 depends on the condition of the brake system. Its main components are discs, pads and calipers.

Excessive wear or failure of the listed items may cause the vehicle to fail to stop. Because of this, the driver risks getting into an emergency situation.

Therefore, it is important to monitor the condition of the main elements of the brake system, strictly observe maintenance intervals and purchase only high-quality consumables for replacement.

Article number and approximate price for front and rear original pads for Corolla 150

The Toyota Corolla 150 is equipped with various sizes of front brake pads, which differ depending on the model of the power plant. On cars with gasoline engines there are consumables with the article number - 04465-12610. Their price is 1400-2000 rubles.

Original 04465-12610

On cars with a 1.4 liter diesel engine, until February 2010, pads 04465-02210 were installed, costing 2500-4000 rubles. Afterwards, modernization was carried out and from August 2011, the Corolla 150 began to be equipped only with products whose article number is 04465-02370. This original has a branded substitute 04465-YZZEC, which has a lower cost. So the price for the first pads is 4000-6000 rubles, and for the second ones 1500-2200 rubles.

Pads 04465-YZZEC

Until November 2008, the Corolla 150 with a 1.6-liter diesel engine was equipped exclusively with pads 04465-02190, costing 2-3 thousand rubles. Having improved the consumables, the automaker began equipping cars with pads with article numbers 04465-02280 and 04465-0F010 in September 2009. Their cost is from 2000 to 2200 rubles.

Pad size 04465-0F010

On the Corolla 150, the size and article number of the rear brake pads also differ depending on the type of power unit. Cars with gasoline engines were initially equipped with pads 04466-12130. In November 2011, a small modernization was carried out and the consumable received article number 04466-12140. The catalog number was also changed in June 2012. The pads received a new part number 04466-12150. At the same time, the standard size of the consumables is the same, so they are completely interchangeable. Their cost ranges from 1600 to 2400 rubles.

Rear pads

The diesel versions of the Corolla 150 are equipped with the same pads, regardless of the size of the power plant. Before June 2009, consumables 04466-02180 were installed, and after - 04466-02181. They are interchangeable. The price of the pads is about 2000-2300 rubles.

Rear pads for cars with a diesel engine

Front pads for Corolla 140 and 150

The main manufacturer of original front pads for Toyota Corolla 140/150 is Advics. Stock brake pads, according to most drivers, have excellent characteristics, do not creak or generate dust, and also last a long time. The front wheels could be equipped with one of 3 types of brake discs, differing in size. The pads are selected according to their size.

*2 sizes are indicated in the column, since the outer and inner pads on the same wheel are different

Toyota 044650F010

Toyota 0446502370

Toyota 0446502220

Analogs of front brake pads for Toyota Corolla 140/150

Numerous pad replacements are also popular. The main reason is the high price of original spare parts. The table shows the most popular replacement pads for the front wheels of the Corolla.

Rear brake pads for Corolla 140 and 150

The main manufacturer of rear brake pads is Akebono. These original components also have high performance and a long service life. The rear wheels are provided with two types of brake discs with different diameters, respectively, with different sizes of brake pads.

It is worth noting that these brake pads are installed on Toyota Auris of the same model years as the Corolla E140 and E150.

Analogues of the rear pads of Corolla 140/150

As is the case with the front ones, the rear original pads are expensive. Therefore, in order to save money, they often buy cheaper substitutes. The table shows a list of the most popular ones.

What brake pads are recommended to buy for Corolla 140 and 150? In general, most Corolla owners are of the opinion that it is best to install original pads. They brake perfectly, do not creak, and most importantly, do not damage the disc. Also, their undeniable advantage is their long service life. If this option is not affordable, then the best budget option would be pads from NiBK. Their main disadvantage is that they generate a little dust. Otherwise, they have proven themselves well.

According to the rating of brake pads for Toyota Corolla 140/150 on PartReview dated 05/07/20, owners prefer NiBK products. Manufacturers Zimmermann, Nisshinbo and ATE also stand out.

Step-by-step replacement of rear and front pads on Corolla 150

Instructions for replacing the front brake pads are given below.

• Open the hood.
• Unscrew the brake fluid reservoir cap. If its level is close to the maximum, then the slurry should be pumped out.
• Jack up the car.
• Unscrew the wheel from the hub and remove it.
• Unscrew the caliper mount, which is located at the bottom.

• Raise the caliper up.

• Using a clamp, press the piston into the brake cylinder.

• By pressing on the brackets with a screwdriver, you need to pull the block towards you. This will allow you to dismantle it.

• Disassemble the removed block. In further assembly you will need an anti-squeak plate and wear sensors.

• Move the wear sensors and anti-squeak plate to the new pad.

• Install the block into the seat.
• Reassemble everything in the reverse order of removal.
• Fill the reservoir with fresh brake fluid. It is prohibited to use pumped out slurry for these purposes. It is hygroscopic and therefore cannot be reused. When adding brake fluid, you must ensure that it does not get on the body.
• Tighten the brake fluid reservoir cap.
• Check the operation of the brake system.

Replacement of rear brake pads is carried out according to a similar algorithm. The only difference is the need to completely remove the caliper, since the parking brake cable prevents its lifting up.

Brake pads for Toyota Corolla

• Brake pads for the ninth generation Corolla (E120 and E130 body).
• Brake pads for the tenth generation Corolla (E140 and E150 body).
• Brake pads for the eleventh generation Corolla (E160, E170, E180 body).
• Remember that after a certain amount of time, all brake mechanisms changed to disc ones, previously there were drum ones. Of course, on ninth-generation sedans before restyling there were drum brakes, but after restyling disc brakes were installed. In the tenth generation it was almost impossible to find drums.
• Brake pads for a 9th generation Toyota Corolla.

For such a car, with 1.4, 1.6 liter engines, front brake pads are installed, the year of manufacture plays a role. Before 05.2004, pads were installed that had the article number 04465-13050; after 05.2004, they were installed - 044-02130. They differ only in shape and also in size.

For diesel engine models with 1.4 and 2.0 engines, only pads were produced, number 04465-13050.

Brake pads (art. 04465-02130).

I would like to immediately note that the pads are original, cat. whose number 04465-02130 has an analogue to Toyota 04465-YZZDC, by the way, if you listen to the statistics, then such pads are the most popular due to the fact that they have a very low cost. Front brake pads Toyota Corolla 9

Look at the table above, there you will see the original front pads that are produced for the ninth generation car. There we have included as much as possible all the most popular analogues. A fairly popular analog option is 04465-13050. Hsb HP5019, Sangsis SP 1244, Akebono AN-634WK, Mando MPT03, LYNXauto BD-7526. If you want to find an alternative to the 04465-YZZDC pads, then perhaps you need to buy pads from the manufacturer TRW GDB 3288, Ate 13.0460-5815.2, Markon 14002178.

Toyota Corollas with E120 and E130 bodies, of course, have slight differences in the rear disc brake pads.

As mentioned earlier, drum brake pads were quite rare for the Corolla 9, see the table below.

Rear disc brake pads for Toyota Corolla 9 Rear drum brake pads for Toyota Corolla 9

There are also options for replacing pads 04466-52030, you can replace them with pads: Ashik 51-02-203, Akebono AN-635WK, Fenox BP43035, Sfec BP011447, Bosch 0 986 424 630.

In order to replace the 04466-YZZD9 pads, you can replace them with TRW GBD 3289, Japan Parts PP-257AF, Textar 2381601, Sangsin SP 1503, Ashika 51-02-257 pads.

If you want to replace drum pads 46540-20080, they are quite rarely used: TRW GS 8723, Bosch 0 986 487 679, Stellox 000 496-SX, EGT 421658EGT, Road House 4729.00.

Brake pads that are purchased for the E140/E150 car

Front brake pads for Toyota Corolla 10 differ in standard sizes for gasoline and diesel vehicles.

Brake pads for Toyota Corolla E140/E150

1. For Corollas with a gasoline engine, original front pads with catalog number 04465-12610 are most often installed.
2. For the 1.4 diesel engine, until 02/2010, pads 04465-02210 were installed; after 08/2011, pads 04465-02370 were installed. But of course, the substitute was a little more popular, most likely due to its low cost; the catalog number for these is 04465-YZZEC.
3. For diesel engines with a volume of 1.6 liters, until the year of manufacture 11.2008, pads 04465-02190 were installed; after 01.2009, they began to install 04465-02280. There are also good substitutes that cost much less than 04465-0F010.

Front brake pads Toyota Corolla 10

Rear disc brake pads for Toyota Corolla 10

Front brake pads Toyota Corolla 11

Rear disc brake pads Toyota Corolla 11

You can replace 04466-02290 with good analogues from the manufacturers: Texr 2466401, Ashika 51-02-220, te 13.0460-5604.2, Ferodo FDB 4048, Hsb HP9915.

In conclusion, we can say that the most popular pads are from manufacturers in China and Japan, such as: Kshiyam, NiBK, Nisshinbo, Ashik, Japan, Parts, Akebono, Masuma.

They are popular due to the fact that they have a fairly low cost and good quality. Brembo pads are not a bad option, they are in the top three. Remsa, Textar, TRW are also actively purchased; they are famous for their quality products, but the cost is slightly higher than that of other analogues.

Article number and cost of original Corolla 150 calipers and their analogues

Article numbers and approximate costs for new original calipers are shown in the table below.

Table - Branded calipers Corolla 150

Since the cost of original calipers is quite high, many car owners give preference to third-party manufacturers. Lists of the best brands are given in the tables below.

Table - List of analogues of the branded front right caliper Corolla 150

Table - List of analogs of the original front left caliper Corolla 150

Table - List of analogues of the original rear right caliper Corolla 150

Table - List of analogues of the original rear left caliper of Corolla 150

In addition to replacement, you can restore the performance of the brake system if the caliper fails by repairing it. For these cases, Toyota produces original repair kits, the article numbers of which are:

• front - 0447802160;
• rear - 0447912230.

The cost of the front repair kit is 1400-4000 rubles. For a branded rear caliper repair kit, the car owner will need to pay from 1,200 to 3,400 rubles. Third party manufacturers also produce repair kits. For the front caliper, car owners recommend using exclusively the Febest kit. It produces its products for the Corolla 150 with article number 0175ZRE151F and costing 500-900 rubles. The list of the best repair kits from third-party manufacturers for the rear caliper is given in the table below.

Table - List of analogues of the rear caliper repair kit for Corolla 150

Brake pads for Toyota Corolla E140/E150

The front brake pads of Toyota Corolla 10 had different sizes on models with gasoline and diesel engines. Moreover, there was no “unanimity” even between different diesel engines - 1.4 and 2.0, the pads of which had different part numbers and sizes:

1. On Corollas with gasoline engines, original front pads 04465-12610 were installed.
2. On diesel 1.4, before 02/2010 there were pads 04465-02210, and after 08/2011 - 04465-02370. However, they have a more popular original substitute - 04465-YZZEC, which is more attractive in price.
3. On diesel 1.6, until 11.2008, pads 04465-02190 were installed, and after 01.2009 - 04465-02280. But again, the original replacement 04465-0F010 turned out to be more popular for these pads (and cost again played a role).

04465-12610 presented in the table, TRW GDB 3425, Brembo P 83 082, Markon 19100175, Sangsin SP 2093, Nisshinbo PF-1524 are in demand.

The most popular analogs of the front pads 04465-YZZEC are: Bosch 0 986 494 260, Masuma MS-1921, Ashika 50-02-250, TRW GDB 3481, Remsa 1310.02.

Such replacements for the original pads 04465-0F010 as: Sangsin SP 1580, Brembo P 83 109, Ate 13.0460-5603.2, Allied Nippon ADB31799, G-brake GP-02289 are less popular than the analogues in the table, but they also have their buyers.

The rear disc brake pads of the Corolla E140 and E150 also differed on diesel and gasoline engine models. But here, on cars with different diesel engines, the rear pads were the same:

1. On Corollas with gasoline engines, until 10/2011 the original brake pads had catalog number 04466-12130; after 11/2011 it changed to 04466-12140, and from 06/2012 it became 04466-12150. They all have the same shape and size, the same analogs, but often, owners choose pads 04466-12150 as the original.
2. On Corollas with diesel engines, before 06.2009, original rear pads 04466-02180 were installed, and after - 04466-02181. But they are slightly less popular among consumers than brake pads 04466-YZZE3, which have a more favorable price. Again, they are all interchangeable.

Slightly inferior in popularity to the analogues of the rear pads 04466-12150 in the table, they are followed by TRW GDB 3454, Japan Parts PP-214AF, Brembo P 83 083, Fenox BP43057, Ashika 51-02-214.

For pads 04466-YZZE3 the following substitutes are also sometimes purchased: TRW GDB 3480, Textar 2466401, Sangsin SP 1501, Ashika 51-02-220, Remsa 1356.02.

Rear brake pads 04466-YZZE3 Toyota Corolla 10 and rear brake pads 04466-02290 Toyota Corolla 11 have the same shape and dimensions and are interchangeable.

Description of replacing calipers on Corolla 150

You can replace the calipers on the Corolla 150 using the instructions below.

• Jack up the car.
• Remove the wheel.

• Turn the steering wheel all the way. This will make it easier to remove the caliper.
• Clamp the brake circuit hose to prevent fluid leakage and air in the system.
• Unscrew the caliper mount.
• Install in the reverse order of removal.

Description of caliper repair for Corolla 150

Torn brake piston boot
During the operation of the car, the caliper boots are destroyed. In order not to carry out an expensive replacement, the car owner has the opportunity to purchase a special kit and make repairs.

New rubber cuffs

When replacing a torn boot, you must first put it a little on the piston, and then on the cylinder. If you reassemble in the reverse order, there is a high risk of breaking the rubber.

Boot installation process

Completing the boot replacement

The caliper is constantly exposed to aggressive environmental influences. Because of this, a layer of corrosion forms on its surface. It can be cleaned using a metal brush and special tools.

When repairing a caliper, lubrication of the guides is mandatory. In this case, information about heat resistance must be indicated on the tube. Otherwise, the lubricant will be destroyed when the brakes first heat up and the guides will jam.

Article number and price for original rear and front brake discs, their analogues

The original front brake discs have part numbers 4351202180 and 43512YZZAC. Their cost ranges from 4,000 to 5,200 rubles. The rear branded wheels have article numbers 4243102170 and 42431YZZAE. Their price ranges from 2000 to 4000 rubles. In addition to the originals, there are good analogues, a list of which is given in the tables below.

Table - Analogues of the original front brake discs of the Corolla 150

Table - Analogs of branded rear brake discs of Corolla 150

Brake pads for Toyota Corolla E120/E130

The 9th generation Corolla with 1.4 and 1.6 petrol engines had different front brake pads installed, depending on the year of manufacture. Before 05.2004 there were pads with article number 04465-13050, and after 05.2004 - 04465-02130. They have differences in shape and size. Models with diesel engines 1.4 and 2.0 had only pads with number 04465-13050.

Brake pads 04465-02130

Brake pads 04465-13050

It is worth noting that the original front pads 04465-02130 have an analogue from Toyota 04465-YZZDC, which, judging by the statistics of online stores, is purchased much more often due to its lower price.

The table shows the original front brake pads for the 9th generation Corolla and the most popular analogues. In addition, such analogs of 04465-13050 as: Hsb HP5019, Sangsin SP 1244, Akebono AN-634WK, Mando MPT03, LYNXauto BD-7526. As a replacement for brake pads 04465-YZZDC, the following analogues from other companies are sometimes taken: TRW GDB 3288, Ate 13.0460-5815.2, Markon 14002178.

Toyota Corolla E120 and E130 also had different rear disc brake pads. Before 05.2004 there were pads 04466-52030, and after - 04466-02160. At the same time, the latter also had an analogue from the manufacturer - 04466-YZZD9, which was more successful than the factory pads.

As previously mentioned, drum brake pads were not very common on the Corolla 9, but they still found a place in the table below.

In addition to the most popular analogs presented in the table, the following brake pads from other manufacturers are often purchased to replace 04466-52030 : Ashika 51-02-203, Akebono AN-635WK, Fenox BP43035, Sfec BP011447, Bosch 0 986 424 630 and others.

To replace 04466-YZZD9 , sometimes they take TRW GDB 3289, Japan Parts PP-257AF, Textar 2381601, Sangsin SP 1503, Ashika 51-02-257.

As an alternative to drum pads 46540-20080, TRW GS 8723, Bosch 0 986 487 679, Stellox 000 496-SX, EGT 421658EGT, Road House 4729.00 are less commonly purchased.

Step-by-step instructions for replacing rear and front brake discs on a Corolla 150

Brake discs are replaced according to the algorithm given below.

• Jack up the car.
• Remove the wheel.
• Remove the caliper and pads.
• Remove the disc. To do this, there are two threaded holes on it into which you need to screw the bolts. This will make it easier to remove the stuck disk.
• Lubricate the seat with copper grease.
• Install a new disk.

• Check the seating of the disc. There should be no debris underneath it, otherwise it will cause beating later.

• Reassemble everything in the reverse order of removal.

Installation of the rear disc is similar to the front one. The main difference is the need to first lower the handbrake.