Payment for goods and downloading of the book in electronic form (PDF format) is made on the website.
To do this, you need to find the book you are interested in and click on the “Buy” button. The price of the book is indicated on the button.
For convenience, the price on the website for residents of Russia, Belarus and Kazakhstan is presented in rubles.
For residents of Ukraine in hryvnias, and for all other countries - dollars.
After clicking on the “BUY” button, a payment window will open where you can select a payment system with which you can pay for the selected book using any bank card (Visa, MasterCard, MIR, etc.)
When you click on the “Pay by bank card” button, the Portmone payment system will open, which is the easiest way to make a payment.
In addition, the website offers four payment systems for payment:
- Yandex (payment from any bank cards, Yandex Money account, QIWI Wallet, terminals, etc.);
- Portmone (payment from any bank cards, Portmone account);
- PayPal (payment from any bank cards, PayPal account);
- WebMoney (payment from any bank cards, payment from WebMoney wallets).
Payment via Yandex Cashier
After selecting payment via Yandex, the Yandex Cashier payment system will launch, where you need to select a convenient payment method (bank card, QIWI, Yandex Money account, etc.)
After specifying payment details and confirming payment, payment for the goods will occur.
If you have a bank card in a currency other than the ruble, then the money will be debited from the card at the rate of the Central Bank of Russia at the time of the purchase.
This payment method is optimal for residents of Russia, Kazakhstan and Belarus.
Official website of the Yandex Kassa payment system https://kassa.yandex.ru
Replacement procedure
The low beam lamp socket is located near the outer edge of the headlight housing, symmetrically on both sides. Be careful not to confuse it with the high beam lamp, which is located closer to the middle part of the headlight housing. Before proceeding with the replacement, remove the negative terminal from the battery.
In order to remove the light bulb, you need to do some minor operations.
- Disconnect the electronic connector. To do this, press the latch and pull it towards you.
- Then turn the protective cap counterclockwise.
- Disconnect the electronic connector by unscrewing the lamp 90 degrees, also counterclockwise.
Be careful not to touch the glass of a new lamp with your hands, because this may cause it to quickly fail.
This information applies to headlights installed on a vehicle in industrial conditions.
Payment via Portmone
After selecting payment through Portmone, the payment system will launch, where you need to select the payment method: bank card or Portmone account.
The price in the Portmone payment system is converted into dollars at the exchange rate of the Central Bank of the country where you are located.
If you have a bank card in a currency other than the dollar, then the money will be debited from the card at the rate of the Central Bank of your country at the time of the purchase.
After specifying payment details and confirming payment, payment for the goods will occur.
Official website of the Portmone payment system https://www.portmone.com
Replacement features
In the first case, you should remove the clips that attach the protective plastic to the body. A special tool with a V-shaped cutout is ideal for this, but in the latter cases you can get by with a flat-head screwdriver. To remove the clamps, you need to apply a small force in the vertical direction.
Depending on which side the bulb needs to be replaced, access may differ slightly. If you need to replace the passenger side, first disconnect the windshield washer reservoir mount. On the driver's side, nothing should interfere with replacing this element.
Payment via PayPal
After selecting payment via PayPal, the PayPal payment system will launch, where you need to select the payment method: bank card or PayPal account.
If you already have a PayPal account, then you need to log into it and make a payment.
If you do not have a PayPal account and you want to pay using a bank card via PayPal, you need to click on the “Create an Account” button - shown with an arrow in the picture.
PayPal will then prompt you to select your country and provide your credit card information.
After specifying the information required to make the payment, you must click on the “Pay Now” button.
Official website of the PayPal payment system https://www.paypal.com
Changing light sources in fog lights
For Rav 4 2014, fog lights with a power of 19 W type C (halogen H16) are suitable.
To ensure there is enough space when replacing a light bulb, turn the steering wheel in the opposite direction. Those. if the right fog light changes, the steering wheel turns to the left, and vice versa.
- The wing protection is removed after removing the clamp.
- After pressing the latch, the connector is removed.
- The base is unscrewed counterclockwise.
- When installing a new light source, its three protrusions must be connected to the mounting recesses and turned clockwise.
- Having installed the connector in place, shake the lamp by the base and check the strength of the fastening. Then turn it on and make sure that the headlight works and the light does not leak through the mount.
- The wing protection is put in place, secured and turned with a lock.
Sources:
https://drive2me.ru/2021/08/16/%D0%B7%D0%B0%D0%BC%D0%B5%D0%BD%D0%B0-%D0%BB%D0%B0%D0% BC%D0%BF-%D0%B1%D0%BB%D0%B8%D0%B6%D0%BD%D0%B5%D0%B3%D0%BE-%D1%81%D0%B2%D0% B5%D1%82%D0%B0-%D1%82%D0%BE%D0%B9%D0%BE%D1%82%D0%B0-%D1%80%D0%B0%D0%B2-4/ https://automaster67.ru/toyota/tojota-rav-4-zamena-lampy-blizhnego-sveta-razbiraem-podrobno
Payment via WebMoney
After selecting payment via WebMoney, the payment system will launch, where you need to select the payment method: bank card or WebMoney wallet.
If you already have a WebMoney wallet, then you need to log into it and make a payment.
If you do not have a WebMoney wallet and you want to pay in another way, you need to select any of the methods that WebMoney offers and make the payment
After specifying payment details and confirming payment, payment for the goods will occur.
Official website of the WebMoney payment system https://www.webmoney.ru/
Selecting a light element
Before you change a lamp that has failed, you need to purchase a new element that fits your car. The headlights of most modern cars are equipped with elements with a base of type H4–H7 of the following varieties:
- Cheap light bulbs with tungsten filament. They are characterized by a short service life and weak luminous flux.
- The most common are halogen lamps. They combine an affordable price with good light output and a long service life.
- Gas-discharge, they are also xenon. Reliable and inexpensive products, the corresponding feature is that they emit a catchy beam of bluish light.
- LED. Economical elements that create good illumination and have a long service life. The downside is the high cost of the product.
If desired, the standard halogen lamp can be replaced with an LED or xenon lamp, provided that the part fits the base. If you change the type of lighting parts, you will have to take and install a couple of light bulbs in both headlights. Regardless of the type, the electronic power of the part should be 55 W (marking on the package - 12V/55W). It is not recommended to replace the low beam bulb with a stronger one, so as not to dazzle drivers of oncoming cars.
Russian and Dialuch products are attractive due to their good price-quality ratio. Among the foreign brands, it is worth highlighting several recognizable brands:
- Philips;
- Bosch;
- OSRAM;
- General Electric;
- Koito.
Downloading a book
After successfully completing the payment (by any method) and returning to the KrutilVertel store from the payment system website, you will be taken to the successful payment page:
On this page you need to indicate your e-mail, where access to download the book will be sent.
If you are already registered on our website, then simply follow the link to your personal account.
The book you purchased will be in your personal account, from where you can always download it.
Please note that after making the payment, you need to return back from the payment system website to the KrutilVertel website.
If for some reason you did not return back to the site and closed the payment system tab with a message about the successful completion of the payment, please let us know - we will send you a letter indicating access to download the book.
RAV-4 low beam lamp replacement (1st generation)
How to replace low beam lamps in 1st generation RAV4 in our article. Headlights of modern vehicles can be divided into several main types: low and high beam headlights, fog lights and special lighting devices.
Help The purpose of close-range headlights is to illuminate the road ahead of the car at 50-60 meters. The devices must be configured in such a way as to cover part of the roadside without blinding oncoming cars. There are two types of light distribution:
- American system.
- European version.
They differ in the structure of the formation of the light beam. Systems for two and four lighting positions can be used.
More information about the repair of the first generation RAV4
Low beam headlights are made of transparent glass. The formation of a directed beam is influenced by the reflector.
There are rules for turning on daytime running lights and low beams: clause 19.5 of the traffic rules. Clearly, the use of light is indicated in the table below.
RAV-4 low beam lamp replacement (1st generation) - table
About the low beam lamps on the RAV-4
Today, we will look at the question of how to make the light on a car brighter, we will test halogen lamps. How to achieve a brighter glow without changing the design of the lighting device by replacing RAV -4 lamps .
Reasons for poor quality road lighting:
- Lamps must be kept clean at all times. Even slight contamination creates interference.
- Fogging: moisture gets inside. Reason: the seal is broken. These could be minor cracks, the glass has come off, the sealant has burst, there is no seal, or the rear cap is missing.
- The penetration of dust negatively affects the quality of the lighting device.
- The light bulb is not installed correctly.
- Low voltage.
- The main reason for poor light is the light bulbs themselves. They are not all the same.
If the problem is not resolved in time, the reflector may fail and the headlight will need to be replaced.
There are two ways to clean the kit: with or without disassembly. In case of cloudiness or the appearance of a yellow coating, external polishing of the glass helps.
A felt wheel, a drill attachment and an optical cleaner (polish) are used.
On first-generation RAV-4 cars, H-4 lamps are most often installed.
Features of replacing RAV-4 lamps
Initially, the clips holding the protective plastic are removed. The clamps are removed by force in the vertical direction.
If the passenger side bulb is being replaced, the windshield washer barrel mount must first be disconnected.
If the problem is on the driver's side, additional dismantling of individual elements and structures will not be required.
RAV-4 low beam lamp replacement (1st generation) - clip
How to RAV 4 lamp
It is important, when dismantling, not to confuse the melee and ranged combat elements. The high beam lamp is located closer to the middle part of the headlight housing.
Note! Before starting work, you must disconnect the negative terminal of the battery.
First, the electrical connector is disconnected: you need to press the latch and gently pull it towards you.
RAV-4 low beam lamp replacement (1st generation) - feature
Turn the protective cap counterclockwise. Disconnect the electrical connector. You will need to unscrew the lamp 900 counterclockwise.
RAV-4 low beam lamp replacement (1st generation) - light bulb
Pay attention! When carrying out work, do not touch the glass of the new lamp with your fingers. This error may cause premature failure of the RAV -4 lamp installed for replacement .
Finally
Characteristics of some low beam lamps for the first generation RAV-4:
- Beacons - 16.8 Volts.
- Fakura - 21.6.
- Osram - 20.7.
- Philips - 20.5.
- Satellite – 16.6.
The total power of the tested lamps is 60/65 Watt.
The given characteristics will help you choose budget products, or use Japanese universal lamps, which are relatively inexpensive, good luck.
Problems when paying with bank cards
Sometimes difficulties may arise when paying with Visa/MasterCard bank cards. The most common of them:
- There is a restriction on the card for paying for online purchases
- A plastic card is not intended for making payments online.
- The plastic card is not activated for making payments online.
- There are not enough funds on the plastic card.
In order to solve these problems, you need to call or write to the technical support of the bank where you are served. Bank specialists will help you resolve them and make payments.
That's basically it. The entire process of paying for a book in PDF format on car repair on our website takes 1-2 minutes.
If you still have any questions, you can ask them using the feedback form, or write us an email at [email protected]
Precautionary measures
When performing work, you should use clean cotton gloves that do not leave greasy marks on the flask.
The ingressed oil burns when the light source operates, leaving dark spots and reducing the service life of the parts.
The power supply must fit tightly over the contacts. Otherwise, carbon deposits will form on the metal surface, preventing the passage of electric current. Plastic covers on headlights must be installed without distortion. If the seal is broken, moisture penetrates into the internal cavities, causing corrosion of the steel elements.
